TEMPUR ARC Static User manual

TEMPUR ARC™ Static, TEMPUR ARC™ Adjustable, TEMPUR ARC™ Storage
INSTRUCTIONS FOR USE AND WARRANTY

2
Contents
INSTRUCTIONS FOR USE 3
Welcome to TEMPUR® 3
GENERAL SAFETY INSTRUCTIONS - APPLICABLE FOR ALL BED TYPES:
TEMPUR ARC™ Static, TEMPUR ARC™ Adjustable, TEMPUR ARC™ Storage 3
Symbols 4
Transport, moving, storage, and disposal 5
That 'new product' smell 5
Please note additional instructions for use 5
Fire safety 6
Installation 6
Cleaning and maintenance 6
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™ ADJUSTABLE AND STORAGE BED 7
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™ STORAGE BED 8
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™ ADJUSTABLE BED 8
Troubleshooting 9
List of accessories and spare parts 9
Additional info about cleaning and maintenance of electrical components 10
Disposal of electrical components 10
Dismantling the motor unit 11
WARRANTY 13
In case of any discrepancy between the meanings of any translated versions of this text, the
meaning of the English language version prevails.

3
INSTRUCTIONS FOR USE
Welcome to TEMPUR®
Thank you and congratulations on choosing TEMPUR®. This guide includes everything you
need to know about caring for and getting the best out of your TEMPUR ARC™ product.
GENERAL SAFETY INSTRUCTIONS - APPLICABLE FOR ALL BED
TYPES: TEMPUR ARC™ Static, TEMPUR ARC™ Adjustable,
TEMPUR ARC™ Storage
In the following chapters, the references below will be used to draw your attention to
possible dangerous situations. Please be aware that failure to comply with these instructions
may result in critical injuries or damage to the product.
DANGER Be aware of an immediate dangerous situation, which can
cause death or critical injuries, if not avoided.
WARNING Be aware of a dangerous situation, which can cause death
or critical injuries, if not avoided.
CAUTION Be aware of a dangerous situation, which can cause minor
or moderate injuries, if not avoided.
IMPORTANT Be aware of a dangerous situation, which can cause damage
to the product and/or other property, if not avoided.
NOTICE Direct attention to practical instructions and good advice.

4
Symbols
The following symbols are used on product, packaging or in this manual.
Open the packaging carefully, so
as not to damage the product and
its parts. Dispose of the packaging
safely and as sustainably as
possible in your local area.
Assemble the product
with two persons
Do not cut deep into the
packaging. Handle with care.
Keep dry Humidity level
65 %
Avoid ngers
being trapped
Keep your feet
a safe distance
Be aware not to carry the frame only
holding it from the middle of
the slats or discs
Foot endHead end
Avoid open ame CE marking
on electrical
equipment
Avoid playing
with the
appliance
Consult instructions
for use

5
Transport, moving, storage and disposal
CAUTION
• Do not attempt to move the bed and its parts by yourself, as this may cause
injury. Do it with two people.
• Store the product in a dry environment (max. 65% relative humidity).
• Always follow the safety instructions in the assembly guides and on the product
quality label sticker (placed on the backside of the headboard).
IMPORTANT
Packaging should be sorted into recyclable components and then disposed of in
accordance with the appropriate national environmental regulations. Check with
your local authority or retailer for recycling advice.
That 'new product' smell
Some people notice a slight odour to their new TEMPUR ARC™ product once unpacked. This is
completely harmless and will disappear after a short period of use.
Please note additional instructions for use
Please read the following information clearly as this will provide guidance on how to use
your product and what to expect in the rst few months.
WARNING
• For domestic use only.
• Immediately dispose of all packaging materials as they may pose a suffocation
risk.
• Do not use accessories/attachments that are not recommended by the
manufacturer.
IMPORTANT
• The product should not be used in a moist environment.
• Avoid the use of this product outdoors.
• This should not be used in any application that will be cleaned with an automated
washing system.
• In accordance with our recommended use (sleeping, sitting, and sitting along the
edge), weight restrictions of a maximum 150kg (moving weight) over the whole
bed surface is admissible without restrictions.
Please note that the manufacturer cannot be held responsible for overloading.

6
Fire safety
TEMPUR ARC™ Bed Range products comply with applicable safety standards, which may vary
depending on the product or the region. Further information is available upon request.
Carelessness causes re - we strongly recommend not to smoke in bed.
WARNING
• Risk of re: keep products away from open ames
Installation
For a correct and safe installation, PLEASE SEE THE ASSEMBLY GUIDES FOR FURTHER
INSTALLATION INSTRUCTIONS.
Cleaning and maintenance
A clean bedroom can have a big impact on your sleeping environment and therefore sleep
quality.
To ensure the preservation of your bed’s appearance, we recommend regular vacuuming
with a soft tting, preferably once a week. This gently removes the dust from the surface
without damaging the textile and reduces dust collection.
IMPORTANT
• Always remove stains as quickly as possible before it penetrates the bers. This
may result in a permanent stain.
• Avoid soaking as this can seep through the fabric and damage the underlying
material.
• DO NOT rub the material too hard to remove a stain as this may damage the
material.
NOTICE
• If liquid spills, absorb as much of the liquid as possible with a plain white kitchen
paper towel or cotton cloth to avoid a permanent stain.
• Most spots can be removed with lukewarm water, possibly with a pH-neutral
dishwashing detergent.
• If a stain or spot has dried, remove as much as possible by vacuuming with a soft
brush tting.

7
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™
ADJUSTABLE AND STORAGE BED
Please read the following information clearly as this will provide guidance on how to use
your product and what to expect in the rst few months.
WARNING
• Only use this TEMPUR ARC™ Adjustable and Storage bed for its intended use, as
described in this manual.
• This appliance can only be used by the below users when supervised or instructed
on safety use and full understanding of resulting risks.
These users include:
- Children of 8 years and older
- Persons with reduced physical, sensory or mental capabilities
- Persons with lack of experience or knowledge
• Children should be supervised to ensure that they do not play with the appliance.
• The cleaning and user maintenance must NOT be carried out by children without
supervision.
• It is not advised to allow children and/or pets to play on or under the bed.
• Do not use accessories/attachments that are not recommended by the
manufacturer.

8
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™
STORAGE BED
WARNING
• Keep your head away from the frame. Be very careful not to hit your head while
opening the frame. Be aware that during opening, on the middle way up the
lifting mechanism applies powerful force to lift the system up to the end.
CAUTION
• While opening and closing the storage bed, be careful not to trap your ngers in
the hinges or under the storage frame.
ADDITIONAL INSTRUCTIONS FOR USING YOUR TEMPUR ARC™
ADJUSTABLE BED
DANGER
• Do not use in any environment where combustible, explosive gases or vapors
may be present. (e.g. anesthesiology)
WARNING
• Batteries included with the electronic accessories are not rechargeable and are
not to be placed in a battery charger.
CAUTION
• Do not sit or stand on the frames ends while they are in raised positions.
• When adjusting the position of the bed base, be extra careful not to get your
ngers caught in the mechanism.
IMPORTANT
• Do not use for raising and lowering loads in industrial or technical applications.
• Avoid forces which exceed specied ratings on the ratings plate on the motor.
• To prevent the distortion of ttings, the Adjustable bed base must be placed on
an even surface.
CAUTION
• Electrical components should be connected or disconnected only when the power
supply cord is unplugged.

9
Troubleshooting
This chapter describes troubleshooting methods for xing problems during installation and
daily use.
PLEASE CHECK THE ADJUSTABLE FRAMES ASSEMBLY GUIDES FOR PAIRING AND UNPAIRING OF
REMOTES AND MOTORS
What do you do in case of error:
If you experience an error that is not listed in the table below, please contact your sales agent/
supplier.
Problems Possible cause Solution
The remote control or motor
system is not functioning.
There is no mains
supply voltage.
Connect the mains power.
The drive is suddenly
incapable of movement.
The remote control or
motor is defective.
Please contact your sales agent.
The remote control
battery is empty.
Check the battery and replace if
necessary.
A lead-in connection
has been Interrupted.
Check the cables and reinsert
them, if required.
List of accessories and spare parts
Accessories Spare parts
83715503 Set of mattress side stoppers 83715290 Motor Premium
83715283 Storage Mesh Net 135x190cm 83715291 Motor Entry
83715284 Storage Mesh Net 140x200cm 83715292 Remote Premium
83715285 Storage Mesh Net 150x200cm 83715293 Remote Entry
83715286 Storage Mesh Net 160x200cm
83715287 Storage Mesh Net 180x200cm

10
Additional info about cleaning and maintenance of
electrical components
NOTICE
• Always disconnect the power supply before you start to clean the drive system!
• Never clean the motor unit in an automated washing system or with a high-
pressure cleaner.
• Do not allow uids to penetrate the unit. Damage to the system could result.
• Do not use a cleanser that contains benzene, alcohol, or similar solvents.
• Clean the electrical components as needed using a dry anti-static cloth.
• Make sure that you do not damage the drive's connecting cable.
Disposal of electrical components
To protect the environment and the best possible reutilization, we recommend you follow
the recycling advice below:
Electrical and electronic components
In light of Environmental Protection, waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Electrical and electronic equipment contains materials, components, and substances that may
be hazardous and present a risk to human health and the environment when not handled
correctly.
Equipment marked with the below crossed-out wheeled bin is electrical and electronic
equipment. The crossed-out wheeled bin symbol indicates that electrical and electronic
equipment should not be discarded with unsorted household waste, but must be collected
separately.
Electrical and electronic equipment must not be discarded together with
household waste. Residents must use the collection schemes available to reduce
adverse environmental impacts in connection with disposal of waste electrical
and electronic equipment and to increase opportunities for reuse, recycling, and
recovery of waste electrical and electronic equipment.

11
Dismantling the motor unit
CAUTION
• Electrical components should be connected or disconnected only when the power
supply cord is unplugged.
• Danger of pinching/crushing injuries!
Be sure to carry out work on the drive in a position so that no loads bear on it.
This is to ensure you avoid any risks of crushing or injury.
The disposal of the three-volt batteries is regulated in the EU by Battery Directive
2006/66/EC, and internationally by any applicable national laws and regulations.
The battery should not be disposed of with normal household waste. Check with
your local authority or retailer for recycling advice.
1. Move your product into a position where it is not supporting a load.
2. Disconnect the motor from the power supply!
3. Disconnect all the connecting cables.
4. Remove the inner frame and turn it upside down.
5. Pull rmly on the shutters (A) sideways until they are completely removed.
6. Pull out the motor far enough so that the brackets (C) are out of the slots (B).
7. The motor is now unattached and can be removed.
8. Push the shutters (A) back into the motor so that they are not lost during
transportation.

12
DOC.N.:BF600005
DECLARATION OF CONFORMITY
The manufacturer, Osaühing Bed Factory Sweden, a subsidiary of Tempur Sealy International, Inc.
registered in Riia 66, EE-71009 Viljandi, Estonia,
declare that the following product,
TEMPUR ARC™ Adjustable Bed bases
as delivered, is in conformity with the requirements of the following EU directives and
standards:
Directives Subject
Directive 2006/42/EC Machinery
Directive 2011/65/EU RoHS
Directive 2014/35/EU LVD (Low Voltage Directive)
Directive 2014/53/EU RED (Radio Equipment Directive)
Directive 2014/30/EU EMC (Electromagnetic Compatibility)
Directive 2009/125/EC Ecodesign
Standards Subject
Standard ISO 19833:2018 Furniture — Beds — Test methods for the determination of
stability, strength, and durability
Standard EN1725:1998 Domestic furniture. Beds and mattresses. Safety requirements
and test methods
Standard EN 13759: 2012 Furniture. Operating mechanisms for seating and sofa-beds.
Test methods
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Directives and standards are accompanied by technical product documentation, which proves
the compliance of the product.
This declaration of conformity is no longer valid if signicant changes are made to the design
and/or the construction, which have inuence on the technical documentation.
Signed for and on behalf of:
Osaühing Bed Factory Sweden,
A subsidiary of Tempur Sealy International, Inc.
Riia 66, EE-71009 Viljandi, Estonia
Indrek Aasna - Managing Director

13
In case of any discrepancy between the meanings of any translated versions of this text, the meaning of
the English language version prevails.
WARRANTY
TEMPUR® WARRANTY
This document sets out the terms and exclusions of the TEMPUR® Warranty for new
TEMPUR® products sold to consumers worldwide (excluding the USA and Canada).
Who offers the TEMPUR® Warranty?
The Manufacturer of TEMPUR ARC™beds is Bed Factory Sweden OÜ, a company registered
in Estonia under company registration number 11133916. Registered ofce address: Riia
mnt 66 Viljandi 71009, Estonia. Bed Factory Sweden OÜ (the Manufacturer) is a subsidiary of
TEMPUR-Sealy International, Inc.
What is covered?
The Manufacturer warrants that all new and genuine Tempur ARC™Beds are free from
material defects due to faulty workmanship or materials for the applicable warranty period
(see section - For how long?) unless the product is specically excluded, or an exclusion
applies (see section - Exclusions).
The TEMPUR ARC™bed Warranty is valid for products purchased by consumers anywhere in
the world from the Manufacturer or an authorised retailer for personal use and not in the
course of a business, trade, or profession. A list of authorised retailers is available at
www.tempur.com
For how long?
The TEMPUR® Warranty lasts for the period displayed on or inside the packaging of the
relevant product or as stated below, starting from the date of purchase (except where the
product is an ex-display or demonstration model in which case the warranty starts from the
date of manufacture).
The warranty period is generally as set out in the warranty table, but the Manufacturer
advises that you should check the warranty terms for the country in which you originally
purchased your product as there may be a different warranty period applicable. For this,
please visit www.tempur.com

14
Product: Beds and bed parts Product Warranty What’s covered?
TEMPUR ARC™Bed Bases
(outer frames) and Headboards
10 years Material defects due to faulty
workmanship or materials.
TEMPUR ARC™Bed inner frames
(static slatted, static disc, adjustable
slatted, adjustable disc, storage)
5 years Material defects due to faulty
workmanship or materials.
TEMPUR ARC™Bed adjustable beds
electrical components: motor, remote
control.
3 years Material defects due to faulty
workmanship or materials.
What will we do?
Where a valid claim is made in accordance with this TEMPUR ARC™bed Warranty, the
Manufacturer shall offer, at its choice, either to repair the defective product or provide an
equivalent replacement product free of charge.
The Manufacturer will refund the reasonable delivery cost of returning a defective product
for repair or replacement so long as the claim is valid under the terms of this TEMPUR®
Warranty and the product is returned from an address within the same country as the
authorised retailer the product was purchased from. The repaired or replacement product will
be delivered free of charge to an address within the same country as the authorised retailer
the product was purchased from. In all other circumstances, any delivery costs associated
with any repairs or replacements are the purchaser's responsibility.
In the event of replacement, the Manufacturer shall endeavour to provide a replacement
product from the same line. However, if the product line has been discontinued or the
product is otherwise not available, the Manufacturer reserves the right to provide a
replacement product that, in the Manufacturer’s sole discretion, is similar to the defective
product.
The TEMPUR ARC™bed Warranty provides cover from the date of purchase (or date of
manufacture in the case of ex-display/demonstration products) of the original product. It is
not renewed on the provision of a repaired or replaced product. In these circumstances, the
TEMPUR ARC™Warranty will run for the remainder of the period starting from the original
purchase or manufacture date, as applicable.

15
Exclusions
The TEMPUR® Warranty does not apply if:
• the product has been purchased used, second hand or from anyone other than an
authorised retailer or directly from the Manufacturer. A list of authorised retailers
is available at tempur.com
• the process for making a claim under the TEMPUR ARC™bed Warranty (set out
under the heading "How do you claim under the TEMPUR ARC™bed Warranty?"
below) has not been correctly followed.
• the product has not been used and/or handled with due care and/or in
accordance with the instructions of use, cleanliness and maintenance described in
the Instructions for Use and at tempur.com
• the product has been deliberately damaged or damaged as a result of neglect,
cuts, burns, ooding or any other improper use by you or by any third party.
• the product has been wet or soaked against Manufacturer’s recommendations.
• the product is found to be very stained, soiled and/or otherwise unhygienic.
• the product has been altered or repaired without the Manufacturer’s prior
permission.
• the defect is the result of normal wear and tear.
• There has been opened or tampered with the motors or remote; with the
exception of battery compartments, the warranty will be void if the internal
workings of these components are tampered with.
• Has been overloaded or misused against the manufacturer's weight restrictions.
How do you claim under the TEMPUR® Warranty?
To claim under the TEMPUR ARC™Warranty you must:
• contact the authorised retailer you originally purchased the product from (the
“Seller”). If the Seller is either no longer in business or is no longer a TEMPUR
ARC™bed authorised retailer, please contact the Manufacturer.
• present the original invoice or sales receipt as evidence of the purchase.
• return the product to the Seller or to the Manufacturer (but only if the
Manufacturer has requested the product). If the Manufacturer determines that the
claim is valid in accordance with the terms of this TEMPUR ARC™bed Warranty,
you will be refunded the reasonable delivery costs for returning the defective
product, so long as the product has been returned from an address within the
same country as the Seller.

16
Our liability to you
The liability of the Manufacturer is limited to the cost of repair and/or replacement of the
product under the TEMPUR ARC™bed Warranty. Accordingly, the Manufacturer will not be
liable for all other liability for loss or damage howsoever caused arising out of the purchase,
possession, sale, or use of the product. However, the Manufacturer does not exclude or
limit in any way its liability for death or personal injury caused by its negligence, or fraud or
fraudulent misrepresentation.
The products are only sold for domestic and private use. The Manufacturer has no liability
to you for any loss of prot, loss of business, business interruption, or loss of business
opportunity.
Your legal rights
The TEMPUR ARC™bed Warranty does not affect a consumer’s statutory rights under
applicable law but aims to enhance the consumer’s rights where applicable.