Tennsco FS350 Instruction Manual

GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on products.
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
PK-1080619
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Preassembled Fixed Shelf File
Model No.’s: FS350, FS360, FS370,
FS351L, FS361L & FS371L
Tennsco LLC . , Dickson, TN 37056-1888 • [phone]

REPLACEMENT PARTS
REF. NO. DESCRIPTION
1 Shelf FSS-1 5 6 7
2 Door* FSDR 5 6 7
3 Backstop Rod FSRD 5 6 7
4 Divider FD-1108 20 24 28
5 Lock Assembly* FSL 5 6 7
6 Label Holder* FSLH 5 6 7
7 Scissor Action Assembly** FSSA 5 6 7
*Only included on the units FS351L, FS361L & FS371L.
QTY.
1. To change from legal size ling to letter
size ling, insert the backstop rod as
shown. Insert the left and end of the rod
into the hole in the left hand inner
panel and gently push it over until
it makes contact with the inside wall
of the cabinet side. Now move the right
end of the of the rod close to the hole in
the right hand inner panel and gently
push in the inner panel until the cabinet
exes enough and allows the rod to be
inserted into the hole.
2. Intergrated adjustable levelers compensate
for uneven oors. Levelers can be easily
adjusted with a screwdriver through the
holes in the bottom shelf.
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
49B108
PART NO.
FS350 &
FS351L
FS360 &
FS361L
View of underside
of cabinet.
Gusset
Leveling
Screw


FS361L Closed View
FS361L Open View
Ref.
No. 1

Ref.
No. 2
Ref.
No. 3

Ref.
No. 4

Ref.
No. 5

Ref.
No. 6

FS360 &
FS361L
**NOT SHOWN: Part of door lift assembly.