Tennsco SR-59 Instruction Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCERETAIN INSTRUCTIONS FOR FUTURE REFERENCE
PK-1490223PK-1490223
Wall Mounted Foreman’s Desk
Model: SR-59
Tennsco LLC., Dickson, TN 37056-1888 • [phone]
GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on units.
LIMITED WARRANTYLIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in
the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.

ASSEMBLY OF AN WALL MOUNTED FOREMAN’S DESK
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
Tools required: slotted screwdriver, Philips screwdriver, and 7/16”wrench or nut driver.
The reference numbers used throughout this sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as they are mentioned.
2. Attach the two rear legs (Ref. No. 3) to the desktop
assembly using four bolts and nuts per leg.
2
1
3
3
7
8
1. First, remove all parts from carton and check against the
parts list on back cover for any missing parts. The drawer has
been placed inside the desktop for packaging purposes. While
it is not necessary to remove the drawer to assemble the unit
you may wish to do so for easier access.
Next, attach the desk riser (Ref. No. 1) to the back of the
desktop assembly (Ref. No. 2) using four of the bolts and
nuts (Ref. Nos 7 & 8) supplied. If you have left the drawer
inside the desk top, slide the drawer partially forward for
easier access to the back holes.

4. Mount unit to the wall using the holes in the back
ange of the rear legs. Make sure all the bolts and nuts
are tightened securely before mounting to the wall.
3. Attach the front angled legs (Ref. No. 4) to the front of the
unit, using four nuts and bolts on each leg. Next, attach the
front legs to the rear legs, using a nut and bolt on each side.
5. Insert the drawer lock (Ref. No. 6) into the drawer front
(Ref. No. 5), then attach with the accompanying hex nut.
6
4
5
4
NOTE: Hardware for mounting the unit to
the wall are not supplied because of the
variety of possible wall materials. Be sure
to use hardware appropriate for your
wall situation.
6. Insert drawer into desktop. The unit is now ready
to use.
6

REPLACEMENT PARTSREPLACEMENT PARTS
1 2 3 4
5 6
7
8
NOTE: Additional hardware may be included for replacement purposes.NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.However, should your unit contain missing or damaged parts, please contact your purchase location.
**Available Locally
49B14949B149
REF. NO. DESCRIPTIONREF. NO. DESCRIPTION
1 Desk Riser 1 SR-12R
2 Desktop Assembly 1 SR-13T
3 Front Angled Legs 2 SR-59FL
4 Rear Legs 2 SR-59RL
5 Drawer 1 SR-28D
6 Drawer Lock w/Hex Nut 1 CL-1
7 1/4”-20 x 5/8” Slotted Screws 13 **
8 1/4”-20 Hex Nuts 13 **
QTY. PART NO.QTY. PART NO.
Basic Contruction
Legs ............................. 13 Gauge Steel
Riser ............................. 20 Gauge Steel
Wrapper ....................... 20 Gauge Steel
Drawer Body .................. 20 Gauge Steel
Drawer Front ................ 16 Gauge Steel