Tennsco zt7 Series User manual

RETAIN THIS SHEET FOR FUTURE REFERENCE!
REPLACEMENT PARTS
We make every effort to ensure that all units ship complete and arrive undamaged. However, should your
unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper
replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.
●●
●●
●
●●
●●
●
●●
●●
●
●●
●●
●
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number Purchase Date
Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name
Color (i.e. Medium Grey, Sand, etc.) Company the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 E-mail address: [email protected]
Customer Service: [phone] Fax: [phone]
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
ASSEMBLY INSTRUCTIONS & PARTS LIST #2220805
Tennsco Corp., Dickson, TN 37056-1888 • [phone]
Z-Line Sloping Shelf Unit
RETAIN THIS SHEET FOR FUTURE REFERENCE
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
[phone] or [phone] (toll free)
Website: www.tennsco.com E-mail: [email protected]
PART NO.
DESCRIPTION STARTER UNIT QTY.
The Tennsco Z-Line
Sloping shelf unit is
boltless and can be
assembled with the use
of a rubber mallet. It is
available in 36" and 48"
wide, 18" and 24" deep
and 84" high.
1Standard angle post EUR-84 4 -
2Front to Back Support DRS-XXXX 6 6
3Left to Right Support DRS-XXXX 12 12
4Sloping Shelf ZSS-XXXX 5 5
5Steel Shelf Q2-XXXX 1 1
6Add-on post ZTP-84 - 2
ITEM NO.
●●
●●
●
●●
●●
●
●●
●●
●
●●
●●
●
1
5
4
23
Width
Depth
ADD-ON UNIT QTY.
6

EUR-84
DRS-3614
or
DRS-4811
DRS-1814
or
DRS-2414
Rear DRS is placed 4 1/2" higher
than front DRS for correct angle of
sloping shelf.
Install DRS supports
as shown, make sure
all supports are seated
properly into keyhole.
Lay Steel Boxed formed
shelf on top of supprts
for the top level of unit.
Lower Sloping shelf onto supports with the large
flange placed over the rear support and the small
flange resting inside the channel of the front support.
Install remaining supports at desired distance for each
level and install sloping shelves.
Sloping Shelf
If you are using add-on units use two
ZTP-84 in place of two EUR-84 to
connect the units together.

EUR-84
DRS-3614
or
DRS-4811
DRS-1814
or
DRS-2414
Rear DRS is placed 4 1/2" higher
than front DRS for correct angle of
sloping shelf.
Install DRS supports
as shown, make sure
all supports are seated
properly into keyhole.
Lay Steel Boxed formed
shelf on top of supprts
for the top level of unit.
Lower Sloping shelf onto supports with the large
flange placed over the rear support and the small
flange resting inside the channel of the front support.
Install remaining supports at desired distance for each
level and install sloping shelves.
Sloping Shelf
If you are using add-on units use two
ZTP-84 in place of two EUR-84 to
connect the units together.

RETAIN THIS SHEET FOR FUTURE REFERENCE!
REPLACEMENT PARTS
We make every effort to ensure that all units ship complete and arrive undamaged. However, should your
unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper
replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.
●●
●●
●
●●
●●
●
●●
●●
●
●●
●●
●
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number Purchase Date
Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name
Color (i.e. Medium Grey, Sand, etc.) Company the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 E-mail address: [email protected]
Customer Service: [phone] Fax: [phone]
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
ASSEMBLY INSTRUCTIONS & PARTS LIST #2220805
Tennsco Corp., Dickson, TN 37056-1888 • [phone]
Z-Line Sloping Shelf Unit
RETAIN THIS SHEET FOR FUTURE REFERENCE
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
[phone] or [phone] (toll free)
Website: www.tennsco.com E-mail: [email protected]
PART NO.
DESCRIPTION STARTER UNIT QTY.
The Tennsco Z-Line
Sloping shelf unit is
boltless and can be
assembled with the use
of a rubber mallet. It is
available in 36" and 48"
wide, 18" and 24" deep
and 84" high.
1Standard angle post EUR-84 4 -
2Front to Back Support DRS-XXXX 6 6
3Left to Right Support DRS-XXXX 12 12
4Sloping Shelf ZSS-XXXX 5 5
5Steel Shelf Q2-XXXX 1 1
6Add-on post ZTP-84 - 2
ITEM NO.
●●
●●
●
●●
●●
●
●●
●●
●
●●
●●
●
1
5
4
23
Width
Depth
ADD-ON UNIT QTY.
6