Tern Clubhouse Mini Gen 1 User manual

Clubhouse Mini™
How to Install the Clubhouse Mini
Tools Required (Not Included)
• 4 mm Allen Wrench
• 10 mm Wrench
What’s Included
1. Clubhouse Mini
2. M6 x 20 Bolt x 6
3. M6 x 16 mm Washer x 6
4. M6 x 12 mm Washer x 6
5. M6 Nut x 6
Rear
Front
10 mm
4 mm
9 Nm - 10 Nm
Transporting One Child
4 mm
4 Nm - 5 Nm
Carrying Cargo
Installing a Bottle Cage or Lock
Please review the Carrying Rear Passenger section to learn how to safely carry children on the back of the bike.
Any additional passenger seating accessories are available for purchase from your local Tern dealer.
The Clubhouse Mini fits a single 400 x 400 mm box that is at least 240 mm in height.
Warning
The Clubhouse Mini is not intended to provide protection in the event of an accident or if the bike
falls over. It is solely intended to keep passengers or cargo centered while riding.
Make sure you have all the latest information
needed to use and enjoy this product!
Visit ternbicycles.com/support for updated:
Manual Version 02
Add anti-seize lubricant to the tip of the bolts before securing
the nuts. If anti-seize lubricant is not available, apply any
standard lubricant to reduce friction and prevent thread galling.
* Which set of mounting points to
use varies by bike model, so make
sure to check for compatibility by
visiting the link at the beginning
of this manual before you start.
Clubhouse Mini Gen 1

Sidekick™Wide Decks
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the
original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced.
Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty
does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), and Clubhouse Mini used alone or in combination are trade names, trade devices or registered
trademarks of Mobility Holdings, Ltd
© 2024. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.
ternbicycles.com
ternbicycles.com
Carrying Rear Passengers
ternbicycles.com
Follow Your Bike’s Max Gross Vehicle Weight Limits
Check your bike’s user manual and/or QuickStart Guide for
information about maximum gross vehicle weight* and/or cargo
weight** limits. Please do not exceed these weight limits.
* Maximum gross vehicle weight is the total weight of the bike,
riders (the cyclist and any passengers), accessories, and cargo.
** Cargo weight is the total weight of passengers, accessories, and cargo.
Check Local Regulations
It may be illegal to carry passengers on a bike in your area
even if it has been designed or configured to do so. Check
your local regulations before carrying passengers.
Know Your Riding Condition
Both front and rear tires must always remain in contact with the
ground when riding with passengers. No passenger is allowed
when riding on unimproved or unmaintained trails with a natural
surface, even if your bike is designed to handle such terrain.
Follow Installation Procedures
Check to ensure accessories have been correctly
installed and securely fastened before riding.
Wear a Helmet
Rider and rear passenger(s) are strongly
advised to wear an approved helmet.
Do NOT Leave Children Unattended
Do not allow your children to climb onto the bike nor
leave your children unattended on the bike, even if it is on
the kickstand. Wriggling children can upset the balance
of the bike and a fall may result in serious injuries.
Use Accessories Properly
If you’re carrying young children on your bike, please follow the instructions provided by your child seat manufacturer
for compatibility, proper installation, and recommended use to ensure your child’s safety and comfort.
Our seating accessories are strictly for sitting. Using them for other purposes such as
lifting the bike may cause damage to the frame and/or said accessories.
Our rear handhold accessories are intended for passengers to hold onto. Select rear rack-mounted handholds may be
used to briefly lift the bike over small obstacles, but in general please refrain from adding substantial weight on the top
of or using the rear passenger handholds to lift the bike, as this will cause undue stress which may damage the bike.
Our foot support accessories are strictly for passenger use when SEATED. Standing
on them is unsafe and may permanently damage the frame.
1. Seating. Purpose-built rear seating, chosen
according to the passenger’s needs
2. Handhold. Something for the passenger to
hold on to, other than the bike itself
3. Foot support. Fixed platforms or dedicated
foot rests on both sides of the bike
4. Foot and leg protection. Something to
prevent feet and legs from getting caught
in the spinning wheel
5. Double kickstand (optional). Dual-leg
kickstand with a wide stance that keeps
a bike standing firmly on the ground,
providing extra stability when loading and
unloading a young passenger
The illustrations above show a mix of suggested gear to safely carry passengers. Your combination of passenger accessories may differ
depending on your needs. To learn more about how to safely carry passengers on your bike, visit ternbicycles.com/support.
Scan to view
available passenger
seating accessories
kg
MAX GROSS
VEHICLE WEIGHT BICYCLE ACCESSORIES RIDER(S) CARGO
Before carrying passengers, it’s important to familiarize yourself with your bike’s
capabilities by referring to its user manual and/or QuickStart Guide.
Safety Notes
Riding with Passengers
Use Proper Equipment
The bike must have the following accessories installed in order to safely transport rear passenger(s):
4
1
2
3
5
4
1
2
3
5