Texas Instruments Chipcon Products CC2400DK Programming manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

SWRU049 Page 1 of 2
Quick Start Instructions
CC2400DK Development Kit
Introduction
The CC2400 single-chip RF transceiver provides a highly integrated, flexible low-cost solution
for applications using the worldwide unlicensed 2.4 GHz frequency band. The CC2400DK
development kit is a powerful and flexible tool specifically designed to make it fast and easy
for the user to evaluate the RF performance of the CC2400.
The Development Kit includes two CC2400EB Evaluation Boards and two CC2400EM
Evaluation Modules. The CC2400EM contains the CC2400 chip and required external
components. The CC2400EM can also be used for prototyping together with a
microcontroller.
The CC2400EB serves as a motherboard for the CC2400EM Evaluation Module. The
CC2400EB provides a USB port, buttons, LEDs, voltage regulation, configuration jumpers
and connectors to make it easy to interface the CC2400 with SmartRF®Studio and various
test equipment.
The hardware is documented in the CC2400DK User Manual, while SmartRF®Studio is
documented in its own User Manual. All documentation and software should be downloaded
from Chipcon’s web site. Please visit Chipcon’s web site regularly for updates to the
documentation and software.
Getting started
1. Plug a CC2400EM into a CC2400EB. Connect the CC2400EB to an external power
supply. When shipped, the CC2400EB is configured for use with a 4-10 V power
supply. If you need to change the voltage settings, please see the CC2400DK User
Manual for further details.
2. If you are going to measure the current consumption of the CC2400, insert an
amperemeter between the appropriate terminals of the power connector. If not, make
sure that a jumper is inserted between these terminals.
3. Install version 5.0 or later of SmartRF®Studio on a PC if this is not already done.
Follow the instructions given by the installation program. The PC must be running
Windows 98 or newer (the CC2400DK will not work with Windows 95 or Windows NT
due to lack of USB support).
4. Use the supplied USB cable to connect the CC2400EB to the PC.
5. Start SmartRF®Studio.
6. You can now test the RF performance of the CC2400 chip. It is also possible to set
up a link between two PCs. Please turn to the SmartRF®Studio User Manual for
more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

SWRU049 Page 2 of 2
Figure 1: CC2400EM Evaluation Module
Figure 2: CC2400EB Evaluation Board
USB port
Serial port
Power
terminal
blocks
DC jack
power input
SMA
connectors
Buttons
LEDs
Test
p
ort 2
Test port 1
Jum
p
ers
Antenna
connector 16 MHz
crystal
CC2400
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra