Texecom PrestigeCompact IR User manual

8 COVERAGE AT 2m
7 MOUNTING HEIGHT AND
SETTINGS
6 ANGLING THE DETECTOR5 COVERAGE AND PICK-UP
4
3 STANDARDS & APPROVALS2 ENVIRONMENTAL1 PHYSICAL
!
!
-35°C (-31°F) to +60°C (+140°F)
125g (4.5oz) approx.
-35°C (+31°F) to +55°C (+131°F)
63mm
(2.5”)
40mm
(1.6”)
90mm
(3.6”)
2.5mm (0.1”) ABS
✓
QUALITY ASSURANCE
WARRANTY
10 year replacement warranty.
Document Ref: PCIR/EU/1.0-3
© 2003-2009 Texecom Ltd
The Prestige Compact IR/QD is protected by UK & International Registered Design. Registered Design Number: 3008617
Certificate Number: FM 35285
INS 244-6
�
�
✓
✓
Passive Infrared Detector
15m
50’
15m
50’
90˚
The Prestige Compact IR/QD is designed to detect the movement of an
intruder and activate an alarm control panel. As the Prestige Compact IR/QD is
not a complete alarm system, but only a part thereof, Texecom cannot accept
responsibility or liability for any damages whatsoever based on a claim that the
Prestige Compact IR/QD failed to function correctly.
All specifications are measured at 20˚C (68˚F). Due to our policy of continuous
improvement Texecom reserves the right to change specification without prior
notice.
TAMPER 0V ALARM
JP3
JP4
LED OFF
DO NOT TOUCH
0.3 - 3.0m/s
PULSE COUNT
12
31 - 10ft/s
EOL RESISTOR HEADERS
(See Section 14)
EOL
Resistance
<24VDC, 50mA 23Ω, (N/C)
<24VDC, 50mA
(N/C) Quiescent Current= 9mA @ 12VDC
Max Current= 9mA @ 12VDC
Alarm
Resistance
Alarm Standard: EN 50131 Grade 2 Environmental Class II.
Detector Standard: EN 50131-2-2 Grade 2 Environmental Class II.
EMC: Independently certified to BS EN 50130-4 : 1996.
A1 : 1998 A2 : 2003.
RF Immunity: No false alarms from 80GHz to 1GHz at 10V/m.
1GHz to 2GHz at 10V/m. BS EN 61000-4-3 : 1997.
Electrostatic
Discharge:
No false alarms up to 8kV.
BS EN 61000-4-2 : 1995.
Fast Transient
Immunity:
No false alarms up to ±4kV.
BS EN 61000-4-4 : 1995.
High Energy
Transient Immunity:
No false alarms up to ±1kV.
BS EN 61000-4-5 : 1995.
Conducted RF
Susceptibility:
No false alarms at 10Vrms.
BS EN 61000-4-6 : 1996.
Conducted &
Radiated Emissions:
EN 55022 : 2006 Class B.
EN 61000-6-3 : 2007
MADE IN
ENGLAND
Quad Element Detector
INSTALLATION INSTRUCTIONS
�
OC 03
LED ON
Prestige
Compact IR
only

16 WALL MOUNT BRACKET
15 CEILING MOUNT BRACKET 17 MOUNTING WITHOUT
BRACKETS
9 COVERAGE PATTERN
✓
✗
Seal all holes
2
2 41 3
1 3 4
6
5
6
See Mounting Height Diagram (Section 7)
INS 244-6
13 EOL RESISTOR JUMPER LINKS
The headers JP1 and JP2 (see Section 4) are used to select resistances for End-of-Line
(EOL) wiring applications.
If EOL wiring is not used, the headers should be left in the default (O/C) position.
If the required resistance values are not available, leave the headers in the O/C position
and wire in external resistors as normal.
EOL Settings for Texecom Panels JP1 JP2
Veritas 10k 22k
Premier & Premier International 2k2 4k7Cexample
EXAMPLES OF EOL JUMPER LINK USE - Values shown are for Premier Panels
Double Pole
(jumper links not used)
Dual End-of-Line
(DEOL)
Two DEOL detectors
to one zone
JP1 Selects the End-of-Line
resistance. Equivalent to wiring
a resistor of the selected value
as shown.
JP2 Selects the resistance
across the alarm relay.
Equivalent to wiring a resistor
of the selected value as
shown.
10 MOUNTING
For indoor use only
11 WIRING
Do not run cable parallel to mains wiring
✓
✗
✓
✗✓
230V
110V
230V
110V
✓
✗
12 CHOOSING A LOCATION
Avoid common false alarm sources
Mount on a stable surface
14 DETECTOR KNOCKOUTS