Thermo Scientific RC 3BP Plus User manual

50113587-6 04 / 2013
Thermo Scientific
Sorvall RC 3BP Plus
Instruction Manual
Visit us online to register your warranty.
www.thermoscientific.com/labwarranty

Thermo Scientific
Sorvall RC 3BP Plus
Instruction Manual
50113587-6 04 / 2013

© 2013 Thermo Fisher Scientific Inc. All rights reserved.
Delrin, TEFLON, and Viton are registered trademarks of DuPont. Noryl is a registered trademark of SABIC.
POLYCLEAR is a registered trademark of Hongye Chemical Co., Ltd. Hypaque is a registered trademark of
Amersham Health As. RULON A and Tygon are registered trademarks of Saint-Gobain Performance Plastics.
Alconox is a registered trademark of Alconox. Ficoll is a registered trademark of GE Healthcare. Haemo-Sol is
a registered trademark of Haemo-Sol. Triton X-100 is a registered trademark of Sigma-Aldrich Co. LLC.
All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Thermo Electron LED GmbH
Robert-Bosch-Straße 1
D - 63505 Langenselbold
Germany
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-
free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might
result from any use of this document, even if the information in the document is followed properly.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Original manual 50113587-6 printed in 04 / 2013.

ThermoFisher
(€
SCIENTIFIC
KO N FO NU ITATSERKLA NU ru C
DECLARATION OF CONFORMITY
Name und Anschrift des Herstellers und des Bevollmächtigten
für die Zusammenstellung der relevanten technischen Unterlagen:
Name and address of the manufacturer and of the authorized
representative to compile the relevant technical documentation:
Thermo Electron LED GmbH
Werk Osterode
Am Kalkberg
D-37520 Osterode am Harz
Hiermit erklären wir, dass die nachstehend beschriebene Maschine
Herewith we declare, that the machinery described below
mit alten einschtägigen Bestimmungen der Maschinenrichtlinie 2006/42/EG in Übereinstimmung ist.
is in conformity with all relevant terms of directive for machinery 2006/42/EC.
Die Maschine ist auch in Übereinstimmung mit allen einschlägigen Bestimmungen der Richtlinie
200 4/1 0 8/EG ü be r e le kt rom ag n etisc h e Ve rträg Iic h ke it.
The machinery is in accordance with all relevant terms of directives for electromagnetic compatibility
2004n08/EC.
Die Schutzziele der Niederspannungsrichtlinie 2006/95/EG werden eingehalten.
The protection goals of the directive for low voltage 2006/95/EC are meL
Angewandte harmonisierte Normen/
Harmonized standards used:
EN 61010-l :2004
EN 61010-2-020: 2006
EN 61326-1: 2006
EN 5501 1A:2007
Osterode, den 30.08.201 1
6un
Dr. Thomas Reck
Werkleiter
Beschreibunq /description : Labor-Zentrifuqe
Modellbezeichnunq / model name : RC3 BP+
Modellnr/ model no. : 75007553
Gültig ab Equipmentnr.
Valid from equipment no. :4126277'l
Ort, Datum, Name, Funktion und Unterschrift /
Place, date, name, function and signature
Jatum ok0ment Revision
Erstellt Lienemann 17.08.2011 to1 31 1 3/ 00
:reiqeqeben Laaboubi 17 0A 20,11

WEEE Conformity
This product is subject to the regulations of the EU Waste Electrical & Electronic Equipment (WEEE)
Directive 2002/96. It is marked by the following symbol:
Thermo Fisher Scientific has entered into agreements with recycling and disposal companies in all EU
Member States for the recycling and disposal of this device. For information on recycling and disposal
companies in Germany and on the products of Thermo Fisher Scientific, which fall under the RoHS
Directive (Restriction of the use of certain hazardous substances in electrical and electronic
equipment), please visit the website www.thermoscientific.com/rohswee

Thermo Scientific Sorvall RC 3BP Plus i
T
Preface ....................................................................................................................................... iii
Scope of Supply ....................................................................................................................... iii
Intended Use ..............................................................................................................................iv
Accident Prevention .................................................................................................................iv
Precautions .................................................................................................................................v
Chapter 1 Introduction and Description ............................................................................................... 1-1
Characteristics of the Thermo Scientific Sorvall RC 3BP Plus ................................. 1-2
Technical Data ........................................................................................................ 1-3
Directives, Standards and Guidelines ........................................................................... 1-4
Functions and Features ............................................................................................................ 1-4
Mains Supply ........................................................................................................... 1-5
Rotor Selection ........................................................................................................ 1-5
Chapter 2 Before use ............................................................................................................................... 2-1
Before Setting up ..................................................................................................... 2-2
Location .................................................................................................................. 2-2
Setting up ................................................................................................................ 2-2
Transporting the Centrifuge .................................................................................... 2-5
Mains Connection ................................................................................................... 2-5
Other Connections .................................................................................................. 2-5
Storage ..................................................................................................................... 2-6
Chapter 3 Control Panel .......................................................................................................................... 3-1
Control Panel .......................................................................................................... 3-2
Numeric Keypad ..................................................................................................... 3-2
Run Display ............................................................................................................. 3-2
Set Display .............................................................................................................. 3-3
Primary Function Keys ............................................................................................ 3-3
Primary Functions ................................................................................................... 3-4
Keypad Lock ............................................................................................................ 3-6
Chapter 4 Operation ................................................................................................................................. 4-1
Switch on Centrifuge ............................................................................................... 4-2
Open door ............................................................................................................... 4-2
Close door ............................................................................................................... 4-2
Rotor Installation ..................................................................................................... 4-3
Normal Operation ................................................................................................... 4-3
Centrifugation ......................................................................................................... 4-5
Programmed Operation ........................................................................................... 4-6
Temperature Control ............................................................................................... 4-7
Rotor Temperature Equilibration ............................................................................ 4-7
Table of Contents

Contents
ii Sorvall RC 3BP Plus Thermo Scientific
Chapter 5 Advanced Features ................................................................................................................ 5-1
Advanced Features ................................................................................................... 5-2
................................................................................................................................ 5-7
Chapter 6 Control Inspection ................................................................................................................. 6-1
QC RUN ................................................................................................................ 6-2
Customer Control Inspection .................................................................................. 6-3
Chapter 7 Maintenance and Care ......................................................................................................... 7-1
Cleaning Intervals .................................................................................................... 7-2
Cleaning .................................................................................................................. 7-2
Disinfection ............................................................................................................. 7-4
Decontamination ..................................................................................................... 7-5
Autoclaving the rotors .............................................................................................. 7-6
Service of Thermo Fisher Scientific .......................................................................... 7-6
Chapter 8 Troubleshooting .................................................................................................................... 8-1
Mechanical Emergency Door Release ...................................................................... 8-2
Circuit Breakers ....................................................................................................... 8-3
Failure message ........................................................................................................ 8-3
Chemical Compatibility Chart ..............................................................................A-1
Warranty ...................................................................................................................B-1
Contact Information ................................................................................................C-1

Thermo Scientific Sorvall RC 3BP Plus iii
P
Preface
Before starting to use the centrifuge, read through this instruction manual carefully and follow the
instructions.
The information contained in this instruction manual is the property of; it is forbidden to copy or pass
on this information without explicit approval.
Failure to follow the instructions and safety information in this instruction manual will result in the
expiration of the sellers warranty.
Scope of Supply
If any parts are missing, please contact your nearest Thermo Fisher Scientific representative.
This symbol refers to general hazards.
CAUTION means that material damage could occur.
WARNING means that injuries or material damage or contamination could occur.
This symbol refers to a rotor failure.
3~ This symbol refers 3 phase alternating current.
Article number Quantity Check
Centrifuge Sorvall RC 3BP Plus 1
Power supply cable 1
50127698 CD with instruction manual 1
70907249 Installation kit 1

PIntended Use
iv Sorvall RC 3BP Plus Thermo Scientific
Intended Use
•This centrifuge is a laboratory product designed to separate components by generation of
centrifugal force It separates human samples (e.g. blood, urine and other body fluids) collected in
appropriate containers, either alone or after addition of reagents or other additives.
•The centrifuge is designed to also run other containers filled with chemicals, environmental
samples and other non-human body samples.
•This centrifuge should be operated by trained specialists only.
•The centrifuge is to be used for separating materials of different density or particle size suspended
in a liquid.
Maximum sample density at maximum speed: 1.2
Accident Prevention
g
cm3
-----------
Prerequisite for the safe operation of the centrifuge is a work environment in compliance
with standards, directives and trade association safety regulations and proper instruction of
the user..
The safety regulations contain the following basic recommendations:
•Maintain a radius of at least 30 cm around the centrifuge.
•Implementation of special measures which ensure that no one can approach the
centrifuge for longer than absolutely necessary while it is running.
The mains plug and main switch must be freely accessible at all times. Pull out the power
supply plug or disconnect the power supply in an emergency.

P Precautions
Thermo Scientific Sorvall RC 3BP Plus v
Precautions
In order to ensure safe operation of the centrifuge, the following general safety regulations
must be followed: Ignoring the safety regulations can result in severe damage and inguries.
•Do not manipulate the safety devices
•The centrifuge should be operated by trained specialists only.
•The centrifuge is to be used for its intended purpose only.
•Plug the centrifuge only into sockets which have been properly grounded.
•Do not move the centrifuge while it is running.
•Use only rotors and accessories for this centrifuge which have been approved by Thermo
Fisher Scientific. Exceptions to this rule are commercially available glass or plastic
centrifuge tubes, provided they have been approved for the speed or the RCF value of
the rotor.
•Do not use rotors which show any signs of corrosion and/or cracks.
•Do not touch the mechanical components of the rotor and do not make any changes to
the mechanical components.
•Use only with rotors which have been properly installed. Follow the instructions in
section “Rotor Installation” on page 4-3.
•Use only with rotors which have been loaded properly. Follow the instructions given in
the rotor manual.
•Never overload the rotor. Follow the instructions given in the rotor manual.
•Never start the centrifuge when the door is open.
•Never open the door until the rotor has come to a complete stop and this has been
confirmed in the display.
•The door emergency release may be used in emergencies only to recover the samples
from the centrifuge, e.g. during a power failure (see section “Failure message” on
page 8-3).
•Never use the centrifuge if parts of its cover panels are damaged or missing.
•Do not touch the electronic components of the centrifuge or alter any electronic or
mechanical components.
•Please observe the safety instructions.

PPrecautions
vi Sorvall RC 3BP Plus Thermo Scientific
Please pay particular attention to the following aspects:
•Location: well-ventilated environment, set-up on a level and rigid surface with adequate
load-bearing capacity.
•Rotor installation: Check that the rotor is locked properly into place before operating
the centrifuge.
•Especially when working with corrosive samples (salt solutions, acids, bases), the
accessory parts and vessel have to be cleaned carefully.
Always balance the samples.
Centrifuging hazardous substances:
•Do not centrifuge explosive or flammable materials or substances which could react
violently with one another.
•The centrifuge is neither inert nor protected against explosion. Never use the centrifuge
in an explosion-prone environment.
•Do not centrifuge inflammable substances.
•Do not centrifuge toxic or radioactive materials or any pathogenic micro-organisms
without suitable safety precautions.
When centrifuging microbiological samples from the Risk Group II (according to the
Bio-safety Manual" of the World Health Organization (WHO)), aerosol-tight biological
seals have to be used.
For materials in a higher risk group, extra safety measures have to be taken.
•If toxins or pathogenic substances have gotten into the centrifuge or its parts,
appropriate disinfection measures have to be taken (see “Disinfection” on page 7-4).
Highly corrosive substances which can cause material damage and impair the mechanical
stability of the rotor, should only be centrifuged in corresponding protective tubes.
WARNING If a hazardious situation occurs, turn off the power supply to the centrifuge
and leave the area immediately.

Thermo Scientific Sorvall RC 3BP Plus 1-1
1
Introduction and Description
Contents
•“Characteristics of the Thermo Scientific Sorvall RC 3BP Plus” on page 1-2
•“Technical Data” on page 1-3
•“Directives, Standards and Guidelines” on page 1-4
•“Functions and Features” on page 1-4
•“Mains Supply” on page 1-5
•“Rotor Selection” on page 1-5

1Introduction and Description
Characteristics of the Thermo Scientific Sorvall RC 3BP Plus
1-2 Sorvall RC 3BP Plus Thermo Scientific
Characteristics of the Thermo Scientific Sorvall RC 3BP Plus
The maintenance-free induction motor ensures quiet and low-vibration operation even at high speeds,
and guarantees a very long lifetime.
The user-friendly control panel makes it easy to pre-set the speed, RCF value, running time,
temperature, and running profile (acceleration and braking curves). You can choose between the
display of speed and RCF or the entry mode.
These settings can be changed even while the centrifuge is running.
The Sorvall RC 3BP Plus is equipped with various safety features:
•Housing, rotor chamber, baseframe, and guard ring are made of high-strength, high-quality steel.
•The door is equipped with a view port and a lock.
•The door of the centrifuge can only be opened while the centrifuge is switched on and the rotor
has come to a complete stop. The centrifuge cannot be started until the door has been closed
properly.
•Electronic imbalance recognition
•For emergencies only, e.g. during power failures (see “Failure message” on page 8-3).

1 Introduction and Description
Technical Data
Thermo Scientific Sorvall RC 3BP Plus 1-3
Technical Data
The technical data of the Sorvall RC 3BP Plus is listed in the following table.
Table 1-1. Technical Data
Feature Value
Environmental conditions • Use in interior spaces
• Altitudes of up to 2,000 m above sea level
• max. relative humidity 80 % up to 31° C; decreasing linearly up to
50 % relative humidity at 40° C
Permissible ambient temperature +2° C to +40° C +35.6° F to +104° F
Overvoltage category II II II
Pollution degree 2 2 2
Heat dissipation 230 V 208 V 400 V
~5.2 kW ~4.5 kW ~5.8 kW
17700 BTU/h 15300 BTU/h 19700 BTU/h
IP 20 20 20
Running time unlimited unlimited unlimited
Maximum speed nmax 5000 rpm 5000 rpm 5000 rpm
Minimum speed nmin 300 rpm 300 rpm 300 rpm
Minimum sample temperature 4° C bei 4700 rpm 4° C bei 4550 rpm 4° C bei 4700 rpm
Maximum RCF value at nmax 7277 xg 7277 xg 7277 xg
Maximum kinetic energy < 153 kJ < 153 kJ < 153 kJ
Noise level at maximum speed 1< 58 dB (A) < 58 dB (A) < 58 dB(A)
Temperature setting range +2° C to +40° C +2° C to +40° C +2° C to +40° C
Dimensions
Hight
Width
Depth
Length power cord
1178 mm
800 mm
905 mm
3000 mm
46.3 inch
31.5 inch
35.6 inch
118.1 inch
Weight without rotor 475 kg 1047 lb
1front side measurement

1Introduction and Description
Directives, Standards and Guidelines
1-4 Sorvall RC 3BP Plus Thermo Scientific
Directives, Standards and Guidelines
Functions and Features
The following table gives an overview of the important functional and performance characteristics of
Sorvall RC 3BP Plus.
Table 1-2. Directives, Standards and Guidelines
Tension /
Frequency
Produced and inspected according to the following
standards and guidelines
220-230 V, 50 Hz;
400 V, 50 Hz
2006/95/EC Low Voltage Directive:
2006/42/EC Machine Directive:
2004/108/EC EMC Directive
EN 61010-1, 2nd Edition
EN 61010-2-020, 2nd Edition
EN 61326-1
EN 55011B
EN 61000-6-2
208-220 V, 60 Hz;
230 V, 60 Hz
UL 61010-1, 2nd Edition
CAN/CSA-C22.2 No. UL 61010-1, 2nd Edition
IEC 61010-2-20, 2nd Edition
(Pollution degree 2, Overvoltage category II)
Emitted interference FCC Part 15 A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
Table 1-3. Functions and Features
Component / Function Description / Features
Structure / Housing Galvanized and powder doated high-strength steel chassis and guard-ring
Chamber Stainless steel
Drive Induction drive without carbon brushes
Keys and display Easy-to-clean keypad and display surface
Controls Microprocessor-controlled
Internal memory The most recent data is saved
Functions RCF-selection, temperature control
Acceleration / braking profiles 11 acceleration and 11 braking curves
Imbalance detected Electronic, contingent on rotor and speed
Door lock Automatic door closing and locking starting from an initial hold position

1 Introduction and Description
Mains Supply
Thermo Scientific Sorvall RC 3BP Plus 1-5
Mains Supply
The following table contains an overview of the electrical connection data for the der Sorvall RC 3BP
Plus. This data is to be taken into consideration when selecting the mains connection socket.
Rotor Selection
The Sorvall RC 3BP Plus centrifuge is supplied without a rotor.
Various Thermo Scientific rotors are available to choose from.
The technical data of the rotors and the corresponding adapters and reduction sleeves for various
commercially available containers can be found in the corresponding rotor operating manuals.
For more information visit our website at: www.thermoscientific.com/centrifuge.
Table 1-4. Electrical connection data
Article
number
Mains
voltage Frequency Rated current
Powercon-
sumption Equipment fuse Building fuse Mains plug
75007530 208-220 V 60 Hz 17.5 A 3300 W 25 A & 6 A 30 A NEMA 6-30P
SinglePhase
75007533 220-230 V 50 Hz 18 A 3500 W 25 A & 6 A 32 A NEMA 6-30P
SinglePhase
75007565 400 V, 3~ 50 Hz 16.5 A 3200 W 25 A & 6 A 3x32 A IEC60309 CEE
32 A-6h
1P+N+PE
H-6000A 11250
HBB-6 11753
HLR-6 11350

Thermo Scientific Sorvall RC 3BP Plus 2-1
2
Before use
Contents
•“Before Setting up” on page 2-2
•“Location” on page 2-2
•“Setting up” on page 2-2
•“Transporting the Centrifuge” on page 2-5
•“Mains Connection” on page 2-5
•“Other Connections” on page 2-5
•“Storage” on page 2-6

2Before use
Before Setting up
2-2 Sorvall RC 3BP Plus Thermo Scientific
Before Setting up
1. Check the centrifuge and the packaging for any shipping damage.
Inform the shipping company and Thermo Fisher Scientific immediately if any damage is
discovered.
2. Remove the packaging.
3. Check the order for completeness (see “Scope of Supply” on page P-iii).
If the order is incomplete, please contact Thermo Fisher Scientific.
Location
The centrifuge should only be operated indoors.
The set-up location must fullfil the following requirements:
•A safety zone of at least 30 cm must be maintained around the centrifuge.
People and hazardous substances must be kept out of the safety zone while centrifuging.
•The location must be stable and free of resonance.
•The location must be suitable for horizontal setup of the centrifuge.
•The centrifuge should not be exposed to heat and strong sunlight.
•The set-up location must be well-ventilated at all times.
Setting up
1. Place the pallet with the centrifuge so that you have at least 2 m room in front of the pallet.
2. Release the rails from the pallet.
3. Screw the rails onto the pallet in front of the centrifuge.
WARNING UV rays reduce the stability of plastics.
Do not subject the centrifuge, rotors and plastic accessories to direct sunlight.
WARNING The centrifuge operates with high kinetic energies. Do not run the centrifuge
without a radius of at least 30 cm (12 inch) around the centrifuge.
Do not run the centrifuge while standing on its casters.

2 Before use
Setting up
Thermo Scientific Sorvall RC 3BP Plus 2-3
4. Place the piece of wood under the rails.
5. Place the locking stabilizers under the studs and screw them down.
6. Remove the 4 screws that fix the centrifuge on the pallet. The heads are upside down in the pallet.
7. Remove the bolt spacers.
8. Screw the studs with the safety brackets entirely up. Otherwise they might get stuck when rolling
the centrifuge off the pallet.
9. Remove the rubber feet.
Rails
Studs
Safety brackets