Thuraya MarineStar Quick start guide

MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 1 OF 10
Thuraya Telecommunications Company
Thuraya MarineStar Firmware Upgrade User Manual
PSDD07052020
MAY 2020
Revision 1.0
CONFIDENTIAL
COPYRIGHT © 2020 THURAYA TELECOMMUNICATIONS COMPANY ALL RIGHTS RESERVED
Legal Information - This document contains proprietary information and, except with written permission of Thuraya
Telecommunications Company, such information shall not be published or disclosed to others, or used for any purpose and the
document shall not be copied in whole or in part.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 2 OF 10
Revision History:
Rev
No.
Date
Prepared by
Reviewed By
Change History
1.0
07-05-2020
Raveendranath Gouni
Goutham Kumar Sunkara
Initial release

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 3 OF 10
Table of Contents
1Basic Information: ........................................................................ 4
2Introduction:............................................................................... 4
3Product Features: ......................................................................... 4
4Objective: .................................................................................. 5
5Pre-Requisites:.............................................................................. 5
6Steps to Upgrade MarineStar: .......................................................... 5

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 4 OF 10
1. Basic Information:
Product Name: Thuraya MarineStar
Manufacturer: APSI, South Korea.
Firmware Changes:
Commercial Version: MNB_1.1_S1_TH Released on 24-03-2020
Hardware Changes: Nil.
2. Introduction:
The MarineStar is an affordable and robust voice satellite terminal with tracking and monitoring
capabilities. The terminal is easy-to-install and user-friendly enabling satellite voice calls to
landlines, mobile phones and other satellite phones through the Thuraya satellite network.
The MarineStar also supports SMS services through its easy-to-use menu on the color LCD screen
on the terminal. An SOS button is available to notify pre-configured contacts during an emergency.
When the SOS button activated, the MarineStar will send a pre-determined SOS message, which
includes the time-stamped GPS, coordinates of the position to a maximum of five preset contacts
for emergency response. The terminal has a RJ11 socket for connecting to an analogue phone or
PBX.
3. Product Features:
Circuit-switched voice.
Fish catch reporting capability.
Advanced two-way vessel tracking and monitoring based on time, distance, speed and
area.
OTA (over-the-air) programming capabilities.
Versatile physical interfaces.
SOS alert.
Geo-fencing capability.
Push notifications for weather, news and other alerts.
Radio silence.
Low and high voltage input power indicator.
Languages: Group 3 product: English, Bahasa and Tagalog; Group 5 product: English,
Arabic, French and Turkish

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 5 OF 10
Figure 1 shows the MarineStar Terminal ADU & BDU
ADU/BDU:
4. Objective:
The main objective of this document is to guide user, how to upgrade MarineStar
manually.
5. Pre-Requisites:
Laptop and Thuraya MarineStar (MNB-01) upgrader application installed on
that.
Firmware file stored on the laptop
USB-to-Serial cable. Ensure that the USB-to-Serial driver is installed properly
in the Laptop, and the corresponding COM port is available in the device
manager.
Thuraya MarineStar should be in powered ON condition, sim card & antenna
are not compulsary.
6. Steps to Upgrade MarineStar:
Step 1: Connect MarineStar to PC/Laptop:
Take any standard USB-to-Serial cable and connect it’s DB9 side to MarineStar serial
port and connect the USB side to PC/laptop.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 6 OF 10
Step 2: Open the Thuraya MNB-01 Upgrader:
Open the Thuraya MNB-01 upgrader by double clicking the upgrader installer
application.
First warning message will come.
Warning Message:
After you ensure the connection press OK button. Then application will open like,
shown in below picture.
Note: Read and follow the instructions shown on application.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 7 OF 10
Step 3: Select the Com Port:
Click the “port setup” button which will open a window where you have to select
the Com port of the USB-to-Serial cable connected, which can be found and listed
under ports menu in the device manager of the laptio.
Note: The selection of COM port is dependent on the manufacturer of the USB to
serial cable.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 8 OF 10
Step 4: Select the firmware file:
Click the “Open” button which will open a window where you have to select the
MarineStar firmware file.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 9 OF 10
Step 5: Start Uploading Firmware file:
Click the “Start” button to start the Upgrade process.
Note: Do not interrupt the upgrade process until it completes. Do not disconnect
the cable while upgrade is in progress.
Note: When you press the start button and if connection is not proper you will get
a warning message like below.

MarineStar Firmware Upgrade User Manual
MarineStar Firmware Upgrade User Manual PSDD-07052020 07 MAY 2020
© THURAYA TELECOMMUNICATIONS COMPANY PAGE 10 OF 10
Step 6: After the upgrade:
You will see the picture like below, press the exit button to terminate the
application.