Timago TGR-R RA 885 User manual

1
NISTRUCTIONS FOR USE
Aluminium 4-wheeled rollator
Product code: TGR-R RA 885
1. Characteristics
Adjustable 4-wheeled rollator is made of aluminium frame which is
coated with paint with metallic lustre. The rollator is equipped with
brakes with locking mechanism, upholstered and height adjustable
seat, backrest, and shopping bag. The product is supplied with solid
wheels with narrow cross section 8’’ in diameter which can be
dismantled for transport, and height adjustable handles with anatomic
handgrips.
The set includes:
•Frame with seat
•Backrest
•Shopping bag with stiffening
•Two push handles with rear wheels
•Front wheels
•Locking knobs – 2 pcs
•Locking pin - 2 pcs
Elements of the rollator:
a. push handle
b. brake
c. locking knob (push handles)
d. locking clip (backrest)
e. backrest
f. seat
g. shopping bag
h. locking pin (rear wheels)

2
i. locking clip (front wheels)
j. cane holder
k. upper adjustment of brake
l. lower adjustment of brake
2. Application
The rollator is designed for patients with reduced mobility who need
stable support and help while walking. It is also recommended to the
elderly as an aid in keeping balance, improving walking comfort and
ensuring safety from falling. The use of the rollator affects positively on
the return to activity of the people with locomotion and tilting to erect
position problems. It guarantees better stabilization, support and
security while walking.
3. Assembly
Unfolding and folding the rollator
•To unfold the rollator, pull the frame apart and press the seat until
the rollator is completely unfolded.
•Rear wheels and push handles are joined by the brake cables, thus
firstly, fix push handles into the mounting openings and blocked
them with locking knobs. Then, block the rear wheels with pins.
•Fix front wheels in the front part of the frame and secure them
with locking clips which are placed in the above height adjustment
openings.
•Fix backrest in the upper part of the frame and block it with
locking clips.
•Remove plastic casing from wheels.
•To fold the rollator, lift up the seat and the bar which is placed
under the seat.
NOTE! Be careful while folding or dismantling the rollator due to the
risk of smashing fingers in hinges.

3
Brakes
•To stop the rollator, pull the brake handle upwards and hold.
•While stop or using the seat, lock the brake with locking
mechanism by pushing down the brake handle.
•To release the brake, pull the brake handle upwards.
Height adjustment of handles
•To adjust the height of the handles, unscrew the locking knob
which is located on the outer side of the frame, select appropriate
height and tighten the locking knob.
Note! The handles must be set on the same level.
Height adjustment of seat
•To adjust the height of the seat, remove the locking clip (for front
wheels assembly) and press the locking pin (for rear wheels
assembly). Select appropriate height and block the wheels with
locking clip and pin.
Adjustment of brakes
Adjustment of upper brake
•Unscrew the nut of the cable, pull it up to the appropriate length
and lock it by tightening the locking nut.
Adjustment of lower brake
•Loosen the mounting screw with the use of open-end wrench, pull
the black brake cable to adjust the tension of the cable, and then,
tighten the mounting screw.
4. Technical data
Overall width
65 cm
Overall depth
69 cm
Seat dimensions
40 cm x 25.5 cm
Seat height from the
ground
63 cm

4
Handles height adjustment
90-100 cm
Weight
6.8 kg
Maximum capacity
130 kg
Maximum capacity of the
shopping bag
5 kg
Frame colour
graphite
5. Notes
Timago International Group does not bear responsibility of improper
use of the rollator, failure to comply safety regulations and misuse.
6. Cleaning and maintenance
•Clean the frame with damp cloth and dry thoroughly.
•Do not use strong polishing agents due to the damage of
protecting coatings.
•Clean the dirt from moving parts of the rollator regularly (hinges,
clamping screws, locks).
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained.
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date

5
Serial number Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021