Timago TGR-R RA 888 User manual

1
INSTRUCTIONS FOR USE
Aluminium 4-wheeled rollator with footrest
Product code: TGR-R RA 888
1. Characteristics
Adjustable 4-wheeled rollator is made of aluminium frame which is
coated with paint with metallic lustre. The rollator consists of
upholstered seat, soft backrest, foldable footrest and detachable
basket. The product is also supplied with height adjustable push
handles with anatomic handgrips and brakes with locking mechanism.
The rollator is equipped with wheels with narrow cross section 8’’ in
diameter.
The set includes:
•Two push handles with locking mechanism
•Frame with seat
•Backrest
•Basket
•Locking knobs with washers – 2 pcs
Elements of the rollator:
a. push handle
b. brake
c. locking knob
d. backrest
e. fixing of backrest
f. basket
g. hinge
h. foldable footrest
i. upper adjustment of brake
j. lower adjustment of brake

2
2. Application
The rollator is designed for patients with reduced mobility who need
stable support and help while walking. It is also recommended to the
elderly as an aid in keeping balance, improving walking comfort and
ensuring safety from falling. The use of the rollator affects positively on
the return to activity of the people with locomotion and tilting to erect
position problems. It guarantees better stabilization, support and
security while walking.
3. Assembly
Unfolding and folding the rollator
•To unfold the rollator, press the side crossbar, which is placed
under the seat, until the hinges are completely unfolded. Then, fix
the handles into the mounting openings and select appropriate
height by installing and tightening the locking knobs. Brake cables
should be placed at the front.
•Fix the basket under the seat and the seat on unfolded frame.
•Fix the backrest into the mounting openings at the front of the
rollator until the pins are locked.
•Remove plastic casing from wheels.
•Unfold the backrest while temporary rest. Fold the backrest while
standing up from the rollator.
•To fold the rollator for transport, lift the seat, take out the basket
and pull upwards the strap which joins the side crossbar with
frame until the frame is completely folded.
Brakes
•To stop the rollator, pull the brake handle upwards and hold.
•While stop or using the seat, lock the brake with locking
mechanism by pushing down the brake handle.
•To release the brake, pull the brake handle upwards.

3
Height adjustment of handles
•To adjust the height of the handles, unscrew the locking knobs
which are located on the outer side of the frame, select
appropriate height and tighten the locking knobs.
Adjustment of brakes
Adjustment of upper brake
•Unscrew the nut of the cable, pull it up to the appropriate length
and lock it by tightening the locking nut.
Adjustment of lower brake
•Loosen the mounting screw with the use of open-end wrench, pull
the black brake cable to adjust the tension of the cable, and then,
tighten the mounting screw.
4. Technical data
Overall width
61 cm
Overall depth
80 cm
Seat dimensions
35 cm x 32 cm
Seat height from the ground
55 cm
Handles height adjustment
78-88 cm
Weight
8.2 kg
Maximum capacity
110 kg
Maximum capacity of the basket
5 kg
5. Notes
Timago International Group does not bear responsibility of improper
use of the rollator, failure to comply safety regulations and misuse.
6. Maintenance
Reviews
Make visual inspection of all the joining elements (clamps, hinges) of
the rollator at least once every three months including:
•Brakes

4
•Mounting elements (pins, nuts, knobs)
•Height adjustment of handles
•Stability and look of the frame
Cleaning
•Clean the frame with damp cloth and dry thoroughly.
•Do not use strong polishing agents due to the damage of
protecting coatings.
•Clean the dirt from moving parts of the rollator regularly (hinges,
clamping screws, locks).
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction

5
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021