Timex iConnect Square M03Z User manual

iConnect Round
M03Z

1.product details
Power button: Power on/off;awaken/turn off screen;back to main menu.
USB port: Charging.
Touch screen: Operate the function in touch screen.
2.Products quick into
Get into the main menu from dial interface by sliding the screen in any angle;
Turn the page by sliding left and right;
Get back to dial interface by sliding screen from bottom to up.
3.Products quick use
1.Bluetooth connection（HitFit）
Scan the QR code in your watch or search “HitFit”APP like below in Google play
store or Apple store, download and install it in your phone. Register the App and
complete profile.
System requirement :
Android 4.4 and above
IOS 8.0 and above(iphone5 and above).
For Android
Open APP HitFit,click “Add device” on “Me”screen to search Bluetooth devices
nearby;
Find your watch code and click to bind the device;
Allow your phone access to your location,messages,phone book and allowing
push function with HitFit.

When BT icon color like means a successful paring. click find watch/mobile
in your mobile/watch,your watch/mobile will vibrating and ringing.
For IOS
Open the Bluetooth and APP HitFit,click “Add device ” on “Me”screen to search
Bluetooth devices nearby,find watch and pair it,after connected, open the Bluetooth
in phone settings, find watches and pair it,then the phone BT menu interface will
show two Bluetooth device are connected successfully as below.

After connected successfully, the blue green double color icon will show
on smart watch.
2. Clock display
Long press the dial interface,then slide around to choose the clock interfaces
you like by clicking the screen.
3.icon introduction of status bar

: Battery capacity
:Bluetooth opening
: Watch connect successfully with mobile phone
4．Menu instruction
4.1 Dialer(BT)
Click dialer icon when want to make a phone call. BT Bluetooth call.
4.2 Setting
4.2.1 Bluetooth setting
Please note the watch can’t turn off BT in watch BT setting once connect with
mobile phone. Only to turn off on watch main menu or smart phone BT setting.
4.2.2 Clock
Setting the clock type;
Time will be synchronized after Bluetooth connection,also you can manually
set the date and time in watch setting.
4.2.3 Sound &Volume
Setting ring tone sound and volume.
4.2.4 Display
Setting screen brightness and black screen time
4.2.5 Language
For Android: Language will be synchronized with mobile phone once turn on
the automatic synchronization function.
For iPhone: Language should be manually set in watch setting tab.
4.2.7 Unit
When setting metric or imperial, the profile weight , height will also change.
4.2.8 Gesture
Mute the incoming call and clock by turn over your wrist;
Display the screen by turning over the wrist;
Answer calls by waggle your wrist twice or thrice.

4.2.10 Restore factory settings
Restoring to factory default state with all date removing.
4.2.11 About
Viewing watch Bluetooth name, device address, the Bluetooth address, and
software version .
4.3 Phone book
Sync Mobile phone book with watch,send messages and edit contact by watch.
4.4 Phone call menu
Click to mute;
Click to hang up;
Click to open the telephone dialing tab ;
Adjust the volume by sliding up and down.
4.5 Heart rate
Wear the watch, go to heart rate tab to monitor your heart rate. It is detecting
when sensor light up. It would take around 30s to get the Heart rate data.
4.6 Message
Smart phone message will sync automatically with watch once connect
successfully.（notice: iPhone not support the message synchronization);
Check the message of watch or mobile(inbox, drafts, sent messages);
Edit text, you can save it to drafts or send it by watch or Bluetooth .
4.7 Notification
Once smart phone connect with watch successfully, allow phone notification
push to watch.
4.8 Call logs
Check the call logs of watch or mobile phone and select the contact you want
to making calling.

4.9 Pedometer
The pedometer function is automatically on. The pedometer data will
automatically sync with App once watch successfully connect with phone.
4.10 Sleep
The watch will automatically monitor your sleep quality during 22:00-8:00;
You can turn on/off the monitor function,check history record by sliding from
bottom to top in sleep screen;
Sync with APP , you can check the history sleep quality date on APP.
4.11 Sedentary remind
Set the sedentary time(remind gap is between 0-300 minutes ),the watch will
vibrate and ring once come to the reminding time.
4.12 Anti- lost
After connecting with the mobile,the phone will vibrate and ring when you click
‘Start’.
4.13 Alarm
You can set the alarm types, bell times, repeat days and the alarm ring.
4.14 QR cord
Scan the QR cord to download APP in your mobile.
4.15 Calender
The screen show daily date when you open it,you can click the red icon to check
the whole month and slide the screen to check other month.
4.16 Calculator

4.17 Camera remote
After watch successfully connect with phone. Watch can open the mobile’s
camera,you can take photos by watch,photos will be saved in your mobile.(open APP
first for iPhone)
4.18 Music
After watch connect with smart phone successfully, watch can control to play
phone music .
4.19 Stop watch
Click the stop watch icon to start timing.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.

ISED Statement
‐English: This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, a
nd (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
‐French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi
oélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
l'appareil numérique du ciem conforme canadien peut ‐3 (b) / nmb ‐3 (b).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure
and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du
cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des
données canadiennes sur l'exposition aux champs rf et la conformité.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be
usedin portable exposurecondition without restriction.
L'appareil a été évalué pour répondre aux exigences générales
d'exposition aux radiofréquences. L'appareil peut être utilisé en condition d'exposition portable
sans restriction.