Tornado Pro Spotter User manual

Pro Spotter
Operations and Maintenance Manual
For Commercial Use Only
Model No. TE011-G03-U

NOTES

Getting Started
Introduction............................................................................................................1
Warranty.................................................................................................................2
Grounding Instructions..........................................................................................3
Important Safety Instructions................................................................................4
TechnicalSpecifications........................................................................................6
Operating Instructions
Key Features..........................................................................................................7
Operation...............................................................................................................7
Transport and Storage.........................................................................................12
Maintenance.........................................................................................................13
Troubleshooting...................................................................................................14
CONTENTS

1
INTRODUCTION
Your new Tornado unit is a high quality, precision-made product. All parts used
in the manufacturing of this unit have passed rigid quality control standards
prior to assembly. Please safeguard the original receipt/invoice given at the time
of purchase. If you experience any problems with your unit during the warranty
period, the original receipt/invoice will act as proof of purchase.
Upon receipt, inspect outer box for exterior damage. Unpack all internal
parts, ensure no hidden damage is found.
Each unit is tested and thoroughly inspected prior to shipping. If damage is
discovered, immediately notify the transportation company that delivered your
machine and request an inspection. As a manufacturer, we are unable to act upon
any claim for concealed damage and you must originate the claim. Be sure
to keep the carton, packing inserts, and carrier’s receipt until the inspector has
verified your claim.
Protect the environment
Please dispose of packaging
materials in an environmentally
safe way according to local waste
disposal regulations.
Always remember to recycle.

2
For warranty information go to www.
tornadovac.com
Within 30 days, to activate the warranty, go to;
https://tornadovac.com/services/warranty-registration-
form.aspx
Prior to operating the this unit, read and understand completely this
owner’s manual paying special attention to warning labels. These labels
indicate a potentially hazardous situation that could result in death or
serious injury if not avoided. Use only as described in this manual.
There are no owner serviceable parts inside this machine. Removal of
screws and accessing internal components will void all warranty claims.
Personal Protection Equipment (PPE) should be worn during the operation
of this machine. Chemicals can remain airborne for some time after
application and therefore safety glasses and masks are recommended.
Gloves should be worn any time chemicals are handled.
WARRANTY

3
This appliance must be grounded. If it should electrically malfunction, grounding
provides a path of least resistance for the current to reduce the risk of electric
shock. This machine is equipped with a cord having an equipment grounding
conductor and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
Improper connection of the equipment grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug
provided with the appliance. If the plug will not fit the outlet,
have the proper outlet installed by a qualified electrician. DO
NOT REMOVE THE GROUNDING PIN FOR ANY REASON.
This appliance is for use on a nominal 115-volt circuit and has a grounding plug
that appears as shown below.
GROUNDING INSTRUCTION

4
Your new Tornado unit is a high quality, precision-made product. All parts used in the manufacturing
of this unit have passed rigid quality control standards prior to assembly. Please safeguard the original
receipt / invoice. If you experience any problems with your unit during the warranty period, the original
receipt / invoice will act as proof of purchase. Contact Tornado for any warranty inquiries.
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT
Read and understand this owner’s manual and all labels on the unit before operating. Safety is a
combination of common sense,staying alert and knowing how your unit works. Use this unit only as
described in this manual. Use only manufacturer’s recommended attachments. To reduce the risk of
personal injury or damage to your unit use only Tornado recommended accessories.
WARNING To avoid fire, DO NOT use with a flammable or combustible liquid or floor cleaner.
WARNING To avoid electric shock, DO NOT expose to rain. Store Indoors.
To reduce risk of fire, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
• Do not leave unit unattended when plugged in. Turn off the switch and unplug the electrical cord
when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If unit is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a service center before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull a cord around sharp
edges or corners. Do not run the unit over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not handle plug or unit with wet hands.
• Do not put any objects into openings. Do not use with any opening blocked, keep free of dust, lint,
hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
• Use extra care when cleaning on stairs. Do not use to pick up flammable or combustible liquids such
as gasoline, or use in areas where they may be present.
• Store your unit indoors in a cool, dry area.
• Do not unplug by pulling on cord. To unplug, grasp the plug, NOT THE CORD.
• Follow these guidelines to ensure operator safety and to maintain equipment in running order.
• Make sure the machine is plugged into an electrical outlet with the same voltage rating as shown on
the nameplate of the machine.
• Do not attempt to plug a 115 volt machine into a 230 volt outlet or a 230 volt machine into a 115 outlet.
• Replace a damaged cord immediately.
• If an extension cord is necessary, use a three conductor grounding cord-12 gauge wire or heavier to
prevent motor burnout and over-heating of wires
• Do not expose the machine to freezing temperatures.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS

5
Flammability Warning
NEVER fill unit with flammable chemicals. Do NOT use in an area where
flammable fumes are present
State of California Proposition 65 Warnings
WARNING: This product contains one or more chemicals known to the state
of California to cause cancer.
WARNING: This product contains one or more chemicals known to the state
of California to cause birth defects or other reproductive harm.
Chemical Warning
Straight bleach should never be used solely in this unit. When sodium
hypochlorite, a component found in bleach, dissolves in water, two
substances form which play a role in both disinfection and oxidation.
Manufacturer’s recommendations must be followed for the chemical being
used to ensure the proper balance is achieved that will disinfect and not
oxidize the metal components found in this machine. It is recommended
to flush the entire system thoroughly with clean water after use and prior to
storage. Store unit dry and empty for prolonged periods following a system
flush. Use only water-based chemicals to clean machine.
Intended Use
Do NOT modify this unit in any way or adapt it for any other use. Modification
of this unit in any way will void all warranties and could create safety hazards.
IMPORTANT SAFETY INSTRUCTIONS

6
Model TE011-G03-U
Input Voltage 115 VAC
Plug Type US
Cord 15’ with on-board storage
GPM .05 with Atomizer Nozzle/.25 with fan nozzle/.25 Extraction
Amps Pre Spray Mode 1A/Extraction Mode 8.9A
Solution Tank 3.5 Gal/13.2 l
Recovery Tank 2.5 Gal/9.5 l
Dimensions 23” x 11” x 23” / 58.5cm x 28cm x 58.5 cm
Weight 41 lbs./18.5 kg
Waterlift 89”/226 cm
CFM/CMM 104/3
Solution Pressure 55 p.s.i./3.8 BAR
Pre Spray Hose 35’ with quick disconnect
Pre Spray Wand 18”
*Variance dependent on user application method
TECHNICAL SPECIFICATIONS

7
• Do not break off or pull out the ground prong on the plug.
• Do not attempt to repair a warranted machine unless instructed to do so by an authorized
shop or the factory.
• Do not use any replacement parts except those specified on the parts list. Proper
performance of the machine could be affected if substitutions are made.
• Use defoamer at all times to prevent damaging the vacuum motor.
• Do not use water in excess of 140° F (60° C).
• Failure to comply with the above warning instructions will void the warranty.
When using as an extractor
• Do not use the machine for totally dry vacuuming. This machine is not fitted with a fine dust
filter.
• Do not use citrus-based cleaners in this machine.
• Do not use cleaning chemicals in this machine except those recommended for commercial
extraction equipment.
• The use of any chemical with abrasive additives voids the warranty.
• Use defoamer at all times to prevent damaging the vacuum motor.
• Do not use water in excess of 140° F (60° C).
OPERATION
KEY FEATURES
Vacuum Hose
Attachment
Spray Tip (included
both an atomizer
and fan spray tip)
Wand Hose
Wand
Upholstery Tool
Upholstery
ToolStorage

8
PRE SPRAY OPERATING INSTRUCTIONS
This unit can be used as either a Pre Spray or an Extractor unit to use on upholstery and for
detail work.
The brass atomizing nozzle provides lower saturation when spraying while a larger brass fan
nozzle is provided for large area coverage.
Filling the unit
• Unplug the unit.
• Disconnect the solution and recovery tanks.
• Remove the upper recovery tank.
• Add water and manufacturer’s recommended solution ratio into solution tank. Fill only to the
fill line indicated on the label on the inside of the solution tank. The tank will hold up to 3.5
gallons.
Operating the unit
• Attach wand pressure hose to the quick disconnect in the pocket at the front of the machine.
• Turn the 3-way switch to SPRAY setting. (Allow approximately 30 seconds for the pump to
prime).
• Use the wand with spray tip to spray the solution. The atomizing nozzle that is pre-installed
on the wand applies smallest micron sized droplets and is perfect for most applications,
however proper application should still be followed to prevent over-saturation. To apply use a
natural up and down or side to side motion, slightly overlapping from one section to the next.
Do not dwell on a spot, as this will cause over-saturation.
• Refill solution tank, as recommended above, to resume cleaning.
After use
• Unplug the unit.
• Disconnect the solution line.
• Unlatch the recovery tank from the base of the unit and remove.
• Drain any remaining solution in the tank following EPA and Manufacturer guidelines for the
disposal of the chemical being used.
• Rinse the tank after each use.
• Allow it to air dry.
OPERATION

9
The wand will come with two spray tip options. The lower micron size atomizing spray tip will
already be installed on the wand. You will also get a higher micron fan nozzle as an option. This
additional nozzle option will be taped onto the wand when you receive the unit. The installed
atomizing nozzle is best for cleaning office areas, touch points, etc, as it does not saturate things
like paper and boxes that could be found in offices, retail, hospitality, restaurant, educational
type of environments. The attached additional fan nozzle spray tip is for application in areas like
warehouses, shipping carts, etc., where there is not a worry that the items being sprayed could
get oversaturated. This allows for a quicker application of the disinfectant to cover larger areas.
Care should be taken when applying disinfectant in food areas. Be sure to read and follow the
manufacturers instructions for disinfectant products.
WAN-PFMS
Replacing the Nozzle
5/4/2020 WAN-PFMS PAGE 1
Remove the misting nozzle from
the wand by loosening
counterclockwise.
Screw the new nozzle on to the
wand clockwise until tight.
Wrap Teflon tape around the
threads on the new nozzle twice
as shown. Avoid getting Teflon
tape into the fluid path as it can
cause clogs.
OPERATION

10
Filling the unit
• Unplug the unit.
• Disconnect the solution and recovery tanks.
• Remove the upper recovery tank.
• Add water and/or chemicals to the lower solution tank. Fill only to the fill line indicated on the
label on the inside of the solution tank. The tank will hold up to 3.5 gallons.
Operating the unit
• Attach the solution line from the vacuum hose assembly to the quick disconnect in the pocket
at the front of the machine.
• Attach the vacuum hose to the vacuum inlet (handle) above the recovery tank lid.
• Turn the 3-way switch to VAC PUMP. (Allow approximately 30 seconds for the pump to
prime).
• Attach the wand to the hose end. Use the wand to spray and recover the solution.
• The float shut-off will disable the suction of the unit when the recovery tank is full. The
operator will notice a distinctive change in the sound of the vacuum motor when the shut-off
is activated. Empty the recovery tank and then fill the solution tank to resume cleaning.
After use
• Unplug the unit.
• Disconnect the solution line and vacuum hose.
• Unlatch the recovery tank from the base of the unit and remove.
• Drain any remaining solution in the tank following EPA and Manufacturer guidelines for the
disposal of the chemical being used.
• Remove the drain plug.
• Drain the tank over a suitable outlet for wastewater.
• Rinse the tanks after each use.
• Store the unit with the lid off of the recovery and allow it to air dry.
OPERATION
EXTRACTOR OPERATING INSTRUCTIONS

11
Solution Hose Connection
3-Way Switch
OPERATION

12
TRANSPORT AND STORAGE
Transport:
1. Take extreme care when moving the machine up or down steps or stairs.
2. Incorrect lifting techniques may result in personal injury.
3. As stated earlier in this manual, this machine is heavy. Do not attempt to lift the
machine without assistance.
4. Carefully wrap the power cord and store in a dry, indoor location.
5. DO NOT expose the machine to rain or moisture.
6. When transporting the machine, ensure that all components, tanks and remov-
able parts are securely fastened and that the power cord and plug are not trail-
ing.
7. DO NOT lift or transport the machine while it contains liquid as this will add con-
siderable weight to the unit.
Storage:
1. Wrap the power cord around the power cord wrap hooks ensuring that the plug
is not trailing on the floor.
2. Always unplug, empty, wipe down and dry the machine after use.
3. Both the solution and recovery tanks should be emptied and flushed out with
clean water to ensure the seals and pumps are free from any cleaning deter-
gents.
Store machine in a dry, indoor area only.

13
MAINTENANCE
Prior to performing any maintenance, ensure unit
is OFF and disconnected from power supply.
Recommended operator checks prior to use:
1. BODY OF MACHINE – Wipe down with a clean, damp cloth.
2. POWER CORD – Regularly inspect sheath, plug, and cord anchorage for dam-
age or loose connection. Only replace power cord with OEM specified replace-
ment part.
3. SOLUTION FEED FILTER – The filter prevents clogging of the pump and spray
nozzle and should be periodically cleaned.
4. NOZZLE MAINTENANCE – If the spray jets become clogged, remove and soak
them thoroughly for an hour in a 8 to 1 ratio of water to white vinegar or anti-
browning solution, and blow-dry. Do not use wire or pins to clean the nozzles as
this will cause the spray pattern to become distorted.
Besides those outlined above, all additional servicing and repairs
should only be performed by an
Authorized Tornado Servicing Agent.

14
Problem Possible Cause Solution
No Spray Pump is not primed. Depress lever on hand tool to
release pressure.
Low Solution Flow
Solution tank level is low.
Clogged filter.
Clogged Spray jet.
Refill Solution tank.*
Clean the screen filter on the
hose in the solution tank.
Clean the spray jet in the hand
tool.
Low Suction
Recovery tank is full.
Clogged Hand Tool or hose.
Excessive foam.
Empty recovery tank.
Clean Hand Tool and hose.
Add defoamer to recovery
tank.
*Before re-filling the solution tank, always empty the recovery tank.
TROUBLESHOOTING
The following checks may be performed by the operator. Any other
service or attempt to service by the operator will void the warranty.

15
PARTS DIAGRAM

16
PARTS LISTING
No. Part No Description Qty
1 X9003 Defoamer Warning Label 1
2 X8295 Screw #8 x 3/4” 6
3 PX103A Clear Lid 4” w/Ring 1
4 X9061 Shut Off Disk 1
5 X9087 Washer 1
6 X9088 Screw 8-18 x 1/2” 1
7 PX103AG Lid Gasket 1
8 X9518 Deflector 1
9 X9062 Float Ring 1
10 X9082-KIT Standpipe Sub-Assembly 1
11 X2046-YEL Label 2
12 72821A Detailer Tool 1-1/2” 1
13 72764A Nozzle Adapter 1
14 X2058 Rigid Hose Assembly 1
15 PX30-KIT Filter and Hose Sub-Assembly 1
16 PX46 Lock Nut 1
17 PX209 Foam Filter 1
18 X9079 Gasket 1
19 X2045 Fill Label 1
20 X1920BLK Solution Tank 1
21 PC66 Fitting 1/4” HB x 1/8” MPT 1
22 71817A Braided Hose 1/4” 250 PSI 8”
23 X9740 Gasket 1
24 X8237 Nyloc Nut 3
25 X9060 Vacuum Motor Screen 1
26 1942-B Vacuum Motor 2 Stage 1
27 X9045 Spacer 3
28 7CY001 Internal Tooth Lock Washer 1
29 X9214 Ground Symbol Label 1
30 PC10 QD Male 1/8” x 1/8” FPT 1
31 X9412 Washer 1
32 7AT006 Brass Fitting 90° 1/4” Barb x 1/8” MPT 1
33 X8212 Lock Washer 7
34 X8291 Screw 1/4-20 x 5-1/2” 3
35 X8459 Serial Number Label 1

17
No. Part No Description Qty
36 X9047 Swivel Caster 45Mm 1/4-20 x 3/4” 2
37 7BS003 Screw 1/4-20 x 1/2” 2
38 00-0600-0503 Washer 8
39 30676 Screw 10-24 x 5/8” 5
40 X9046 Base Plate Weldment 1
41 X8497B Switch Label 1
42 X9048 Rocker Switch 3 Position 1
43 X8008N Lock Nut 1/2” Conduit 1
44 PD8 Strain Relief 1
45 X9719 Power Cord 18 AWG 20’ 1
46 19565 Screw #10-16 x 1/2” 1
47 7CZ001 Vacuum Hose Cut Lengths 8”
48 PX215 Hose Clamp 2
49 FJ5082 Pump w/o Mounts No Fittings 1
50 PX204 Pimp Mount 2
51 PX214 Nylon Elbow Fitting 90° 1/4” HB x 1/8” MPT 1
52 7DL003 Hose Clamp 4
53 X8271 Nyloc Nut 5
54 X9064 Gasket 1
55 72697A Hose 8”
56 X8262 Screw 8-32 x 1/4” 6
57 X8278 Screw 8-32 x 1/2” 2
58 X9059 Latch w/Keeper 2
59 X9106 J Nut 2
60 WAN-PFMS Pre Spray Wand Assembly 1
61 PFX27 Floor Wand Assembly 1
62 PX35-2-4-100 Pre Spray Hose Assembly 1
63 X8976 Warning Label 1
64 X1921BLK Recovery Tank 1
65 X8990 Handle Assembly 1
66 X9065 Screw 1/4-20 x 1” 4
67 72173A Spring Clip 1
68 X2051 Safety Sleeve 1
69 PAS36 Drain Hose Plug w/Strap 1
PARTS LISTING