Toro RT1200 User manual

FormNo.3407-977RevA
ComboforHeavyDutyDriveTrencherandP105
Plow
RT1200TractionUnit
ModelNo.25205
ModelNo.25205E
InstallationInstructions
Safety
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential
danger.Replaceanydecalthatisdamagedorlost.
131-2682
1.Raiseorlowerthe
attachments.
3.Plow
2.Trencher
125-6139
1.Liftpointandtie-downpoint
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3407-977*A

PreparingtheMachine
Ensurethattheliftingequipmenthasaliftingcapacityofatleast405kg(893lb).
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Shutofftheengine.
4.Removethekey.
5.Disconnectthebattery.
RemovingtheAttachments
RemovingtheTrencher
Disconnectthehydraulichosesandremovethetrencher.
Capbulkheadttingsandplughoses.
RemovingthePlowandCounterweight
Disconnectthehydraulichosesandremovetheplow .
Capbulkheadttingsandplughoses.
2

InstallingtheCounterweightonaMachinewithTracks
Installthecounterweightonamachinewithtracksperthegurebelow.
Note:Usethebolt(1x8-1/2inches)previouslyremoved;refertoRemovingthePlowandCounterweight(page2).
2x4x2x
(1x4inches)(1inch)
InstallingtheMountonaMachinewithTracks
Installthemountusing3bolts(1x9inches)fromtheplowassembly.Securetheboltsusing6washersand3nutsthatare
includedinthiskit.
6x3x
(1inch)
3

Installthemountusing1bolt(1x9inches)fromtheplowassembly,1bolt(1x10inches),3washers,and3nutsincludedin
thiskit.
1x3x3x
(1x10inches)(1inch)
4

InstallingtheMountonaMachinewithWheels
Installthemountonamachinewithwheelspertheguresbelow.
3x6x3x
(1x4inches)(1inch)
1x2x4x3x
(1x10inches)(1x4inches)(1inch)
5

AssemblingandInstallingtheValve
Assembleandinstallthevalvepertheguresbelow .
3x2x2x1x1x
2x1x2x2x2x2x
(1/4x3/4
inches)(1/4inch)(3/8x4-1/4
inches)(3/8inch)
6

InstallingtheDirectDriveTrencher
Installthedirectdrivetrencherperthegurebelow .
5x5x8x
(1x3-1/2inches)(1inch)
Connectthe104cm(41inch)hose(hose1)fromthetopttingonthevalvetoportBonthemachine.
Connectthe89cm(35inch)hose(hose2)fromthebottomttingonthevalvetoportAonthemachine.
7

Connecttheexistinghosesfromthetrencherdrivetothevalvesasshown.
Connect1hosefromtherod-endttingofthecylindertotherightport(lowertheattachment)onthemachine.Connect1
hosefromthebase-endttingofthecylindertotheleftport(raisetheattachment)onthemachine.
2x
157cm(62inches)
8

Connecttheteevalvetotheportasshown.
Connecttheexistinghosefromthetrenchermotorttingtotheteevalveasshown.
InstallingthePlow
Installtheplowpertheguresbelow .
1x5x6x12x
(1x4-1/2inches)(1x3-1/2inches)(1inch)
9

Note:ThecylinderstoppreventstheP105plowfromswingingintothetrencherdrivemotor.
1x2x2x
(3/8x2-3/4inches)(3/8inch)
Connectthelongertube(tube1)tothetopttingonthevalve.Connecttheshortertube(tube2)tothebottomtting
onthevalve.
Connectthetubestothecheckvalvefromtheplowassembly.
10