Torque X-LAB-EDGE User manual

X-LAB-EDGE
Assembly Guide
PART #: 5518601-A
VERSION: XLE-X2

XLAB-501
XLAB-501
XLAB BOOT
XLAB BOOT
STEP 1
PAGE 2

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
XLAB-501
GRT-101
XLAB-501
GRT-101
BATTLE ROPE
CONNECTOR
PAGE 3
STEP 2
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-501
XLAB-501
XLAB-401
XLAB-401
1/2 X 3-1/2" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
TOP CONNECTOR
PAGE 4
LOOSELY assemble bolt connections in this step.
STEP 3

XLAB-BOOT
XLAB-301
XLAB-301
XLAB-BOOT
PAGE 5
STEP 4

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
XLAB-401
XLAB-401
SUSPENSION
CROSS
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 5-3/4" BOLT (2)
BT-103
PAGE 6
STEP 5
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
XLAB-501 XLAB-501
AT-101 AT-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
STEP 6
LOOSELY assemble bolt connections in this step.
PAGE 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
MID
CONNECTOR
BATTLE ROPE
HANGER
BATTLE ROPE
HANGER
AT-101
AT-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (12)
1/2" LOCK NUT (6)
XLAB-501 XLAB-501
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4" BOLT
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4" BOLT
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (12)
1/2" LOCK NUT (6)
PAGE 8
LOOSELY assemble bolt connections in this step.
STEP 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-501
AT-101
XLAB-AA-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 3-1/2" BOLT
1/2" FLAT WASHER (2)
1/2" LOCK NUT
STEP 8
LOOSELY assemble bolt connections in this step.
PAGE 9

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-501
AT-101
XLAB-301
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
STEP 9
PAGE 10
ATTENTION:
AFTER THIS STEP HAS BEEN COMPLETED, SECURELY TIGHTEN ALL
BOLT CONNECTIONS IN THIS STEP AND FROM THE PREVIOUS STEPS.

XCC-101
ATTENTION:
ASSEMBLE THE XCC-101 TO THE XLAB EDGE USING
THE INSTRUCTIONS INCLUDED WITH THAT PRODUCT.
STEP 10: XCC-101 ASSEMBLY
PAGE 11

XLAB-AA-101
XLAB-PLYO STEP
PEGS
HOOKS
ASSEMBLED VIEW
PAGE 12
STEP 11
WARNING!
MAKE SURE THAT BOTH HOOKS OF PLYO STEP ARE SEATED
SECURELY IN GROOVES OF PEGS ON ATTACHMENT ANCHOR
BEFORE PERFORMING ANY EXERCISES.

ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
BASE
PLATE
WARNING!
ALL XLABS ARE REQUIRED TO BE ANCHORED TO THE
FLOOR TO PREVENT ROCKING OR TIPPING DURING USE.
PAGE 13
ANCHOR STEPS:
1) Position machine in desired location.
2) Trace around the four base plates and the
four holes in each base plate.
3) Move machine.
4) Drill anchor holes. Follow instructions on
anchor bolt packaging.
5) Vacuum dust out of each anchor hole.
5) Move machine back over anchor holes.
6) Anchor machine. Follow instruction on
anchor bolt packaging.