Torque X-LAB-SPIDER 2 User manual

X-LAB-SPIDER 2
Assembly Guide
PART #: 5519101-A VERSION: XLS2-X1

XLAB-BOOT
XLAB-301
STEP 1
PAGE 2
NOTE: Repeat this step for remaining XLAB 301 uprights.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
HSA-101
XLAB-301
BT-103
XLAB-301
XLAB-101
NOTE:
Assemble to first
and third holes.
NOTE:
Assemble to second
and fourth holes.
1/2 X 3-3/4" BOLT (2)
1/2" FLAT WASHER (4)
1/2" LOCK
NUT (2)
1/2 X 5-3/4" BOLT (2)
1/2" FLAT WASHER (4)
1/2" LOCK
NUT (2)
PAGE 3
STEP 2
NOTE: For ease of assembly, assemble this step on the floor.
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-401
XLAB-101
1/2 X 3-3/4"
BOLT (2)
1/2" FLAT WASHER (4)
1/2" LOCK NUT (2)
PAGE 4
STEP 3
NOTE: CAREFULLY turn machine right side up before proceeding
with this step.
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
BT-103
HBA-101
XLAB-101
XLAB-301
XLAB-301
1/2 X 5-3/4" BOLT (2)
1/2" FLAT WASHER (4)
1/2" LOCK
NUT (2)
1/2" LOCK
NUT (2)
1/2" FLAT WASHER (4)
1/2 X 3-3/4" BOLT (2)
NOTE:
Assemble to first
and third holes.
NOTE:
Assemble to second
and fourth holes.
PAGE 5
STEP 4
NOTE: For ease of assembly, assemble this step on the floor.
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
1/2 X 3-3/4" BOLT (2)
1/2" FLAT WASHER (4)
1/2" LOCK NUT (2)
XLAB-101
XLAB-401
XLAB-301
PAGE 6
STEP 5
NOTE: CAREFULLY turn machine right side up before proceeding
with this step.
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
AT-101 (3)
1/2 X 3-3/4" BOLT (6)
1/2" FLAT
WASHER (12)
1/2" LOCK
NUT (6)
1/2" LOCK
NUT (6)
1/2" FLAT
WASHER (12)
1/2 X 3-3/4" BOLT (6)
STEP 6
PAGE 7
ATTENTION:
After this step has been assembled, SECURELY tighten
all bolt connections from this step and previous steps.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
GRT-101
1/2 X 3-3/4"
BOLT (2)
1/2" FLAT
WASHER (4)
1/2" LOCK
NUT (2)
PAGE 8
SECURELY assemble all bolt connections in this step.
STEP 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
GRT-101
1/2 X 3-3/4"
BOLT (2)
1/2" FLAT
WASHER (4)
1/2" LOCK
NUT (2)
STEP 8
SECURELY assemble all bolt connections in this step.
PAGE 9

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-AA-101
SU-101
1/2 X 3-1/2" BOLT
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4"
BOLT
1/2" FLAT WASHER (4)
1/2"LOCK NUT (2)
1/2" FLAT
WASHER (2)
1/2" LOCK NUT
STEP 9
SECURELY assemble all bolt connections in this step.
PAGE 10

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-AA-101
SU-101
1/2" FLAT WASHER (4)
1/2 X 3-1/2" BOLT
1/2" LOCK NUT (2)
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4"
BOLT
1/2" FLAT
WASHER (2)
1/2" LOCK NUT
STEP 10
PAGE 11
SECURELY assemble all bolt connections in this step.

XLAB-DA-101
XLAB-AA-101
HOOKS
PEGS
ASSEMBLED VIEW
PAGE 12
STEP 11
WARNING!
MAKE SURE THAT BOTH HOOKS OF DIP ATTACHMENT ARE
SEATED SECURELY IN GROOVES OF PEGS ON ATTACHMENT
ANCHOR BEFORE PERFORMING ANY EXERCISES.

XLAB-AA-101
XLAB-PS-101
HOOKS
PEGS
ASSEMBLED VIEW
STEP 12
PAGE 13
WARNING!
MAKE SURE THAT BOTH HOOKS OF PLYO STEP ARE SEATED
SECURELY IN GROOVES OF PEGS ON ATTACHMENT ANCHOR
BEFORE PERFORMING ANY EXERCISES.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
1/2 X 3-1/4"
BOLT W/NP
1/2 X 3-1/4"
BOLT (2)
1/2" FLAT
WASHER (5)
1/2" LOCK
NUT (2)
SU-101
XLAB-301
BR-101
1/2" LOCK
NUT (2)
1/2" FLAT WASHER (5)
1/2 X 3-1/4" BOLT (2)
1/2 X 3-1/4" BOLT W/NP
PAGE 14
STEP 13
ATTENTION:
COMPLETELY ASSEMBLE BR-101 BEFORE ASSEMBLING IT TO
THE XLAB .
SECURELY assemble all bolt connections in this step.

BRACKET COVER (6)
XLAB-101
XLAB-101
NOTE:
MAKE SURE TABS OF BRACKET COVERS ARE
INSERTED INTO GROOVES OF BRACKET ON
XLAB-101 (6 PLACES)
TABS
GROOVES
BRACKET COVER
STEP 14
PAGE 15

BASE
PLATE
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
PAGE 16
ANCHOR STEPS:
1) Position machine in desired location.
2) Trace around the four base plates and
the four holes in each base plate.
3) Move machine.
4) Drill anchor holes. Follow instructions
on anchor bolt packaging.
5) Vacuum dust out of each anchor hole.
6) Move machine back over anchor holes.
7) Anchor machine. Follow instructions on
anchor bolt packaging.
WARNING!
ALL X-LABS ARE REQUIRED TO BE ANCHORED TO THE
FLOOR TO PREVENT ROCKING OR TIPPING DURING USE.