Toto Keane TB211S Installation instructions

Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con-
tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260
[phone] or [phone] when calling from outside of U.S.A.
Installation and Owner’s Manual
Manual de Instrucciones y del Propietario
Manuel d’Installation et d’Utilisation
4 Hole Deck-Mount Tub Filler Trim with Handshower
Grifo Mezclador de 4 Agujeros para Bañera con Teleducha
Robinet Mélangeur 4 Trous pour Baignoire avec Douchette
Keane™
TB211S

2
ENGLISH
TABLE OF CONTENTS
WARNINGS
THANK YOU FOR CHOOSING TOTO!
CARE & CLEANING
BEFORE INSTALLATION
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
Thank You for Choosing TOTO! ........................................................................ 2
Care And Cleaning .............................................................................................. 2
Warnings............................................................................................................... 2
Before Installation................................................................................................ 2
Included Parts ...................................................................................................... 3
Installation Procedure.......................................................................................3-5
Warranty................................................................................................................ 6
Rough-In Dimensions ....................................................................................... 17
Your new tub filler is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly with
warm water and drying with a clean, soft cloth. Do not use abrasive cleaners,
steel wool or harsh chemicals, as these will dull the finish. Failure to follow
these instructions may void your warranty. If any nozzles become clogged
with mineral build up, rub gently with finger tips to clean.
For safe operation, please observe the following:
Operating Pressure:
Minimum Pressure ……………..20 psi (0.14 MPa), dynamic
Maximum Pressure …………….80 psi (0.55 MPa), static
Do not use the product at an ambient temperature below 32 ºF (0 ºC).
Observe all local plumbing codes.
Make sure the water supply is shut off.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update product design without notice.
Check to make sure you have the parts indicated on the following page.

3
ENGLISH
INCLUDED PARTS
(2X) Adjustable Wrench
Remove plug
Spout Assembly
Set Screw and Hex Key Handshower
Handshower Hose
Elbow
Handle Assembly (2X) Handshower Mount
* Actual product may vary in appearance depending on model.
INSTALLATION PROCEDURE - Spout
COMMON TOOLS NEEDED
1. Confirm that the valves have been
installed properly. See the TBMV2
installation manual for further
information.
2. Remove plug from outlet.

4
ENGLISH
SIDE VIEW
INSTALLATION PROCEDURE - Spout
INSTALLATION PROCEDURE - Handles
1. Orient handle assembly and lower
onto the exposed portion of valve until
engaged. Rotate the base (dome) of the
handle assembly to fasten it to the valve.
Repeat for other handle assembly.
NOTE: If handles do not line up exactly
as desired, remove handle from valve and
reinstall one (1) notch over (on valve).
3. Orient spout assembly as shown
and lower onto exposed portion
of diverter valve.
Push firmly until fully seated. Take
care not to damage the o-rings.
Use hex key to fasten spout to
valve with provided set screw.
Tighten as needed.

5
ENGLISH
INSTALLATION PROCEDURE - Handshower
1. Fasten the handshower mount to
the pre-installed rough collar.
2. Place gasket in elbow nut
and fasten handshower until
completely sealed.
NOTE: Only one (1) gasket per
location shown, do not add if
gasket already present.
3. Retract handshower hose to seat
elbow in the handshower mount.
Gasket/Sieve
Elbow