TouchTunes Ovation User manual

ii
Safety information
CAUTION: The lightning flash with arrowhead symbol within an equilateral
triangle signifies the presence of uninsulated dangerous voltage within the
system enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock.
CAUTION: The exclamation point within an equilateral triangle signifies the
presence of important operating and maintenance instructions in this guide.
CAUTION: Ovation components are heavy and represent a serious safety hazard
if their mounting system should fail. Therefore, installation should only be
performed by an experienced installer or licensed contractor that is familiar with
standard rigging, mounting, and hanging practices, as recognized by a licensed
engineer or governmental agency in your area.
CAUTION: Ovation mounting components are UL listed and CSA approved only
when used as specified in this guide. Any other use or modification of the
mounting components is expressly prohibited, as this may present an
unacceptable risk of structural failure.
CAUTION: To reduce the risk of fire or electrical shock, do not expose the system
to rain or moisture.
CAUTION: See product enclosure for safety related markings.

Important safety instructions
iii
Important safety instructions
• Read the instructions for all components before using this product.
• Keep these instructions for future reference.
• Heed all warnings on the product and in the this guide.
• Follow all instructions.
• Do not use this apparatus near water or moisture
• Clean only with a dry cloth and as directed
• Do not block any ventilation openings and install in accordance the instructions in this guide.
To ensure reliable operation of the product and to protect it from overheating, put the product
in a position and location that will not interfere with its proper ventilation
• Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
• Do not defeat the safety purposes of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wider blade or the third grounding prong are provided for your
safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of
the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the TouchTunes.
• Unplug this apparatus during lightning storms or when unused for long periods of time. To
prevent damage to this product during a lightning storm, or if the product will not be used for
an extended period of time, unplug its power cord from the wall outlet and disconnect the
antenna or cable system.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way: such as power-supply cord or plug is damaged; liquid has been
spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped - Do not attempt to service this
product yourself. Opening or removing covers may expose you to dangerous voltages or other
hazards
• To prevent risk of fire or electrical shock, avoid overloading wall outlets, extension cords, or
integral convenience receptacles.
• Do not let objects or liquid enter the product as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
• See product enclosure for safety related markings.

iv
FCC Notice
This equipment has been tested and found to comply with limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Note: Unauthorized modification of the receiver or radio remote control could void the user's
authority to operate this equipment.
This product complies with the Canadian ICES-003 Class A specification.

Table of Contents
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
1 Introduction 1
About this guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Writing Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contacting Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Preparing for Jukebox Installation 3
Unpacking and Checking Jukebox Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up a Broadband or Dial-up Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing Tools for Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Installing the Ovation Jukebox 7
Installing the Ovation Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Attach and level the wall bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hang the Ovation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Open the Ovation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Replacing the Lock for the Ovation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power off the Ovation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Install the hard drive in the MJS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting the Ovation to the Telephone or Broadband Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Accessing the cable channel for the Ovation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect the Ovation to the broadband network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connect the Ovation to the telephone network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting Audio Speakers and Sources to the Ovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connect external speakers to the Ovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting Power to the Ovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connect the power cord to the Ovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Tighten the wire strength-relief bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Turn on power to the MJS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Close the Ovation case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Activate the Ovation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

toc
4ActivatingtheJukebox 23
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Activation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Error Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5Disclaimer 37

1
Introduction
Welcome to the Quick Start Guide for the TouchTunes Ovation jukebox! This
chapter provides you with information about audience pre-requisites, related
documentation, and how to get customer support.
About this guide
Congratulations on choosing a TouchTunes Ovation jukebox! This guide explains how to
prepare for, install and activate your new TouchTunes jukebox. TouchTunes highly recommends
reading this guide to familiarize yourself with the installation procedure before installing your
Ovation.
Related Documentation
This guide is designed to get you started quickly with installing and activating a jukebox in a
location. For more detailed documentation, refer to the following documents:
• The TouchTunes Jukebox Software 3.0 Installation Guide
• The TouchTunes Gen 3 Hardware Operators Manual
• The TouchTunes Gen 3 Software Operators Manual
• The TouchTunes Dashboard User Guide.
You can access any of these documents by doing the following:
• If you do not have access to the TouchTunes Dashboard, request a copy from TouchTunes
Technical Support. See “Contacting Technical Support” on page 2.
• If you have access to the TouchTunes Dashboard, log on to the Dashboard and open the
Documentation page. See the TouchTunes Dashboard User Guide.

2
Introduction
Writing Conventions
This guide uses the following documentation conventions.
Contacting Technical Support
You can contact the TouchTunes Technical Support department for assistance using either of the
following methods:
• Call the Technical Support department toll-free at 1-888-711-5853. Before calling, write down
the jukebox ID number underneath the front of the Ovation case or beside the inside fan.
TouchTunes requires this ID number to provide you with the proper assistance.
Note: If you are outside of the toll-free area, you can still contact the TouchTunes Technical
Support department by dialling 1-847-419-3300 and pressing 1 when prompted. Long-distance
telephone charges may apply if you are calling from outside of the toll-free area.
• Email the Technical Support department from the Contacts page on the TouchTunes
Dashboard; see the TouchTunes Dashboard User Guide. You can also use this page to contact
other departments at TouchTunes, such as the Music, Sales and Finance departments.
What are the writing conventions used in this guide?
Notation: Usage: Example:
Right-click Click with the rightmost
mouse button.
Right-click the image and choose Save Picture As.
Italic A folder or file path. Open C:\My Documents and Settings\My Music.
Bold Menu or button
commands, as well as
labelled areas on the UI.
Choose My Jukeboxes from the Navigation menu.
Click OK when prompted to continue.
Navigate to the Broadband Settings area.
Vertical bar Separates menu
commands.
Choose TouchTunes | Contacts from the Navigation
menu.
Bold with a
colon
Description of what a UI
element in a screenshot
does.
Jukebox Location: Lists jukeboxes by their current
location.
Exclamation
point within
a triangle
Identifies operating and
maintenance information
to know before use.
Caution: Power off the unit before continuing.

3
Preparing for Jukebox Installation
This chapter explains how to prepare to install a TouchTunes jukebox for a
location, including setting up communications connections and unpacking
the jukebox.
Unpacking and Checking Jukebox Components
A TouchTunes jukebox is delivered in several boxes, including boxes for the jukebox hardware
components and a parts kit. The following table shows the dimensions and weight of the
Ovation jukebox:
Before you install the jukebox, you must ensure that you have received all jukebox hardware
components and that both hardware components and the items in parts kit are in good
condition.
To check that you have all jukebox components:
1. Verify that you have received the following hardware components for the Ovation jukebox:
Height Width Depth Weight
Crated 41” 32” 18” 142 lbs.
Uncrated 37 1/4” 27 1/4” 11 1/4” 125 lbs.
Component
Quantity
Component
Description
1 Ovation Digital Jukebox
1 Ovation wall bracket
1Powercord
1Partskit

4
Preparing for Jukebox Installation
2. Open the Parts kit and then verify that it contains all of the following components:
3. Check the condition of all hardware components and parts kit items to ensure they are in
good condition.
Setting Up a Broadband or Dial-up Connection
Every night, a TouchTunes jukebox contacts the main TouchTunes server over the Internet to do
the following tasks:
• Download any new songs chosen by location owner or operator through the TouchTunes
Dashboard, as well as those chosen by the users using the Vote for Download feature.
• Download any new updates to the jukebox system software.
• Report the number of plays per song for music royalty calculations.
• Report daily income for the jukebox.
The connection to the Internet is provided through an Internet Service Provider (ISP). ISPs
normally offer two different types of Internet connections: dial-up and broadband. A jukebox
can use either of these to contact and communicate with the TouchTunes server. However, the
connection type you chose has an impact on the infrastructure needed for the jukebox as well
as the speed of jukebox communications, which are summarized below:
• Dial-up Connection: A jukebox using a dial-up connection uses the normal telephone network
to connect to the Internet and to the TouchTunes server. Dial-up connections do not require any
special hardware beyond a standard RJ-11 telephone jack and cable but communications
speeds are slower than broadband connections.
• Broadband Connection: A jukebox using a broadband connection uses a special, high-speed
network to connect to the Internet and to the TouchTunes server. Broadband connections allow
much faster communications speeds than dial-up connections, but require a broadband
modem and/or router (computer networking device) to connect the jukebox to the high-speed
network.
Component
Quantity
Component
Description
TouchTunes
Part Number
1 Remote control 700031-001
1 Remote control mounting bracket 400188-001
2AAAbatteries
2 Keys (Ilco #549) 400157-001
1 Female RCA to DIN adapter 300141-012
1 Male RCA to DIN adapter 300143-012
3 Eurostyle terminal connector (4-position) 100000-001
1 USB Modem (Optional) 300223-001
1 USB Modem cable with USB A-type an d B-type
connectors (Optional)
300223-001
Caution: Do not attempt to installation if any jukebox hardware component or item in
the parts kit is damaged. Contact your distributor or TouchTunes to report the damage
immediately and request replacement parts.

Preparing Tools for Installation
5
Use the following guidelines to help you choose and set up the Internet connection type for the
jukebox:
• TouchTunes recommends using broadband Internet connections for jukeboxes whenever
possible. The broadband connection permits the jukebox to download new songs much more
quickly than over a dial-up connection. This connection also allows you to change jukebox
settings via the TouchTunes Dashboard and apply them immediately to the jukebox.
• For all connections, ensure you use high-quality cable and make the cable run as short as
possible to minimize potential problems due to line noise and interference.
• For broadband connections, note that the broadband modem and router may be included in a
single device, depending on the equipment used by the ISP and the networking setup for the
location. Both the broadband modem and the router must be installed and configured
properly for Internet access before you can set up a broadband connection for the jukebox.
• To ensure reliability for the broadband connection, TouchTunes recommends establishing a
wired connection between the jukebox and the router. Connecting the jukebox and router
wirelessly may be possible, but this type of connection is not recommended or supported.
• For dial-up connections, TouchTunes recommends running a new telephone cable from the
demarcation point (the point where the telephone line enters the building) for the location to
the jukebox. (The demarcation point may also be called the telephone network interface or
service entry point.) By running new cable from this point to the jukebox, you can avoid
potential problems caused by the existing wiring infrastructure.
• Ensure you have a USB modem before setting up the dial-up connection for a jukebox. Previous
versions of the jukebox provided an on-board modem for setting up a dial-up connection.
However, current TouchTunes jukeboxes require a USB modem for this connection. The USB
modem is an optional jukebox component and must be requested from TouchTunes.
• The telephone line used for a dial-up Internet connection can be shared with other devices,
such as an ATM or alarm system. However, you must co-ordinate call and answer times with any
other equipment that shares the same phone line to prevent scheduling conflicts between the
jukebox and another piece of equipment.
• Ensure sure you connect the jukebox to the analog line in front of the digital phone system for
dial-up connections. A jukebox cannot be connected directly to a digital phone system.
• Ensure that the telephone cable for a dial-up connection does not run close to any florescent
or neon lights as these can cause unwanted interference.
Preparing Tools for Installation
The following list shows tools that you may require to install the Ovation jukebox. Ensure that
you have all tools before beginning installation.
• Spirit level to ensure wall bracket and/or jukebox is level.
• Drill and appropriate drill bits for mounting wall bracket to wood or concrete.
• Phillips screwdriver.
• Flat-head screwdriver.

6
Preparing for Jukebox Installation
• Anti-static wrist strap (sometimes called a conducting wrist strap).
• Adjustable wrench for tightening bolts or nuts.
• Additional flat telephone cable to reconnect the wired remote.
If you are setting up a broadband connection for the Ovation, you may also require the following
tools:
• A laptop computer with a network card and a Web browser, such as Microsoft Internet Explorer
to test Internet connectivity.
• Pre-wired Cat5 network cable (or cable, crimp tool and RJ-45 connectors) to connect the laptop
and/or jukebox to the router.
If you are setting up a dial-up connection for the Ovation, you may also require the following
tools:
• USB modem
• Phone line polarity tester.
• Extra telephone cable with RJ-11 connectors.
• Four-conductor telephone modular wall jack.
• Four-conductor round telephone cable to connect the phone line from the demarcation point
to the modular wall jack.
• A Butt-In test set or analog phone without filters to listen to the newly installed phone line.
Note: The USB modem is an optional jukebox component. If a USB modem was not included
with the jukebox, you must request it from your distributor or TouchTunes.

7
Installing the Ovation Jukebox
This chapter explains how to install the Ovation jukebox, including setting up
its hardware, connecting it to a telephone line or broadband network as well
as attaching the power supply to the jukebox.
Installing the Ovation Jukebox
In this section, you install the Ovation wall bracket and jukebox, level it so it is stable and then
open its case.
Attach and level the wall bracket
Attach and level the wall bracket for the Ovation before hanging the unit.
To attach the wall bracket for the jukebox:
1. On the wall where the Ovation is to be installed, measure 65 inches (5’ 5”) from the floor and
mark this measurement.
This measurement identifies where the top of the bracket will be located on the wall.
2. Using the included template, mark the position for the wall bracket on the wall where you
intend to install the Ovation.
Caution: The Ovation jukebox is heavy and represents a serious safety hazard if its
mounting system should fail. Installation of the mounting system should only be
performed by an experienced installer or licensed contractor who is familiar with standard
rigging, mounting and hanging practices as recognized by a licensed engineer or
government agency in your area.

8
Installing the Ovation Jukebox
This measurement shows how far the bracket will extend along the wall. The wall bracket for
an Ovation jukebox is 25.1 inches wide, as measured from the line below the top flanges.
3. Align the wall bracket with the measurements you made in steps 2 and 3.
4. Using a level, ensure the wall bracket is level both horizontally and vertically.
5. Attach the bracket to the wall using at least four (4) lag bolts and washers.
The wall bracket is attached. Continue to the next procedure to hang the Ovation console on
the bracket and attach it to the wall.
Hang the Ovation
Once the wall bracket is securely attached, hang the Ovation on the wall.
To hang the Ovation on its wall bracket:
1. Move the Ovation so it is close to the wall bracket.
2. Identify the flange hooks for the jukebox on the rear of the Ovation.
These flange hooks fit into receptacles on the wall bracket, securing the Ovation to the wall.
3. Using at least two people, lift the Ovation so that the top of the jukebox is slightly higher than
the top of the wall bracket.
Figure 1
Mounting guidelines for
jukebox wall bracket
Caution: The Ovation jukebox is heavy and can cause injury if lifted incorrectly.
TouchTunes recommends at least two people perform the following procedure.
Top of
Bracket
65 inches from floor
25.1 inches across

Installing the Ovation Jukebox
9
4. Align the flange hooks on the jukebox with the receptacles on the wall bracket.
5. Hang the Ovation on the wall bracket allowing the weight of the jukebox to set it into
position.
Once you are sure the Ovation is stable, you can open up its case.
Open the Ovation
Once the Ovation is installed, open the jukebox to access its internal components. Secure the
Ovation to the wall bracket using internal screws.
To open the jukebox:
1. Locate the key for the jukebox.
New jukeboxes are always shipped with two keys. Because the locks on all TouchTunes
jukeboxes are keyed the same, you can also use a key from any other jukebox to open the new
jukebox.
Figure 2
Mounting jukebox on the
wall bracket

10
Installing the Ovation Jukebox
2. Unlock the Ovation from the lock on the right side of the jukebox and then slowly swing open
the Ovation case.
3. Using the diagram below, identify the location of the holes for the wall bracket screws used
to secure the jukebox to the wall bracket.
Figure 3
Opening the jukebox
Figure 4
Location for wall bracket
screws
Lock
Holes for wall bracket screws

Replacing the Lock for the Ovation
11
4. Attach the wall bracket screws to completely secure the Ovation to the wall bracket.
Replacing the Lock for the Ovation
By default, locks for all TouchTunes Ovation jukeboxes are keyed exactly alike. You can replace
the pre-installed tubular cam lock in any TouchTunes jukebox with another lock that is keyed
differently. Replacing the lock in each jukebox improves onsite security and significantly reduces
the chance of someone breaking in to the Ovation.
The locks shipped with TouchTunes jukeboxes are tubular cam locks with dimensions shown in
the following diagram. Ensure any replacement locks have the same dimensions before
performing the following procedure.
Installing the Hard Drive
Before installing the hard drive, you should familiarize yourself with layout of the central
computer in your Ovation jukebox, called the Modular Jukebox System (or MJS). The MJS is a
specially designed computer mounted inside the Ovation that runs the jukebox. Like a regular
laptop or desktop computer, the MJS contains a power switch, a hard drive and USB connectors
for attaching peripherals.
Caution: The Ovation jukebox is NOT secure until the wall bracket screws
are installed.
Figure 5
Dimensions of the tubular
cam lock used for all
TouchTunes jukeboxes
5/8"
16 mm
5/8"
16 mm
7/64"
3 mm
7/64"
3 mm
7/8"
22 mm
7/8"
22 mm
1 1/8"
1"
0.120"

12
Installing the Ovation Jukebox
To conserve space, the MJS has connections on both its top and bottom panels. Refer to the
following diagrams to identify all components and connections on the MJS for your jukebox.
Power off the Ovation
1. If necessary, ground yourself by touching an exposed piece of metal in the jukebox case.
2. Turn the MJS system power switch to OFF.
Install the hard drive in the MJS
Install the hard drive for the Ovation in its MJS.
1. Locate the hard drive for the jukebox.
The hard drive for a TouchTunes jukebox is contained in an enclosure.
Figure 6
Layout of MJS
a) Microphone connector b) Phone line connector c) Reset button d) Auxiliary audio input connector
e) Audio Out ports f) Manager button
g) USB ports h) Network/Broadband port i) MJS System power switch j) Hard drive
k) MJS power receptacle
VIDEOKBDTELCO
AUDIO OUT
13
LINE IN
RST
USBDMX
MNG
COM1
MIC
12
P
W
R
D
I
A
G
HD
TO CTL
P/N: 300114-
2
SW
(-) (+)
Top Panel
a b c
def
NETWORK
2
USB
13
ON OFF
Serial No.
ACT
LNK
100 - 120VAC
50/60Hz 2.0A MAX.
NO USER-SERVICEABL E PARTS INSIDE
Bottom Panel
g h i
j k

Installing the Hard Drive
13
The hard drive (and its enclosure) are shipped separately from the main jukebox hardware. If
the hard drive has not yet arrived at the location, contact the vendor or distributor.
2. Align the hard drive enclosure with the slot labelled REMOVEABLE HARD DISK on the
bottom panel of the MJS.
The hard drive enclosure cannot be inserted in its slot until it is properly aligned.
3. Insert the hard drive enclosure in the slot and then gently push the enclosure in until it is
completely seated.
Figure 7
Aligning the hard drive with
its slot in the MJS
Figure 8
Inserting the hard drive to
the MJS

14
Installing the Ovation Jukebox
4. Using your fingers, push in and then tighten the thumb screw on the hard drive enclosure
until the thumb screw is securely tightened.
Connecting the Ovation to the Telephone or Broadband Network
In this section, connect the Ovation to the telephone or broadband infrastructure in the location
so the jukebox can communicate with the TouchTunes server.
Accessing the cable channel for the Ovation
The Ovation is designed with a cable channel that allows you to route outside cables (such as for
telecommunications) to internal jukebox components. A wire-strain relief bracket provides slack
for cables inside the jukebox and also covers the opening to the cable channel to keep dust out.
In the following procedure, adjust this bracket to access the opening to the cable channel.
Note: Only route cables in to and out of the jukebox through the provided cable channel
opening. Do not route cables through any other openings in the jukebox, such as air vents.
Otherwise, the jukebox may overheat and shut itself down.
To prepare for cable routing in the jukebox:
1. Identify the following components for the Ovation:
• The cable channel along the back of the jukebox.
Figure 9
Tightening the thumb
screw on the hard drive
enclosure