TP-Link HS100 User manual

OR
Enjoy
Quick
Setup
OR
1 Download TP-LINK Kasa app
HS100 / HS110*
*Smart Plug with Energy Monitoring.
SMART PLUG
2 Connect mobile device to your Wi-Fi network
3 Launch Kasa and follow the app instructions
Button
Press and hold until the Wi-Fi LED
blinks amber and green alternately (about 5
seconds) to initiate the App-Cong
process.
Press and hold until the Wi-Fi LED
blinks amber quickly (about 10 seconds) to
reset the Smart Plug to factory defaults.
| Quick Start Guide
Note: The Smart
Plug can only
connect to 2.4GHz
network.

7106505696 REV 1.0.1 © 2015 TP-LINK. All rights reserved.
Frequently Asked Questions (FAQs)
LEDs
1. What devices can I control with the Smart Plug?
You can control lights, fans, humidiers, portable heaters,
and any small appliances in accordance with the Smart
Plug’s specications.
2. What should I do when I can’t turn devices on or off?
Make sure that the devices connected to the Smart Plug are
turned on, and that the Smart Plug is connected to the
network.
3. What should I do when the Wi-Fi LED is lit solid red?
A solid red indicates no network connection, or that the
App-Cong process has failed. You can:
•Check for interference or relocate the Smart Plug to
another location within the signal range.
• Make sure that you connect the Smart Plug to the 2.4GHz
network.
• Repeat the App-Cong process.
• Factory reset the Smart Plug and try to add it again.
Wi-Fi
Blinking Amber and Green: App-Cong mode
initiated.
Quick Blinking Green: Connecting to the network.
Solid Green: Connected to the network.
Quick Blinking Amber: Factory reset.
Solid Amber: Rebooting.
Solid Red: No network connection.
Power
Solid Green: The Smart Plug is switched on.
Off: The Smart Plug is switched off.
Technical Support
For technical support, advanced features, and usage tips
for the Smart Plug, visit
www.tp-link.com .
?