How do I use the Power Bank to charge other
portable devices?
Connect your device(s) via the charging cable to the
Power Bank.
User Guide 1
5V/1A
5V/2A
Note:
The 5V/2A USB port can automatically adjust its current to charge your
5V/1A devices.
10400mAh Power Bank
Model No. TL-PB10400
Power Button
Output1: 5V/2A
Flashlight
Output2: 5V/1A
4 LED Lights
Input: 5V/2A
1 LED blinking
1 LED on
Off
LED Display Battery Level
75%~100%
50%~75%
25%~50%
10%~25%
0%~10%
0
Press the power
button to check the
current battery level,
the LEDs will turn off
automatically after 5
seconds.
2Flashlight
Attention
7106505967 REV2.0.1 ©2015 TP-LINK
Connect the Power Bank via a power adapter to an
electrical power outlet.
Note:
1. The Power Bank is compatible with 5V DC adapters. For more efficiency,
we suggest using a 5V/2A power adapter to charge the Power Bank.
2. You can also charge the Power Bank via a computer's USB port, but it will
take longer to charge.
3. The Power Bank cannot charge other devices while it is charging.
Keep this device away from water, fire, humidity or hot
environments.
Do not heavily drop or impact this device.
Do not attempt to extrude or pierce this device, which
may cause it to short-circuit.
Do not attempt to disassemble, modify or repair this
device by yourself.
Do not use a damaged power adapter or USB cable to
charge this device.
If the product appears to be bulging or shows other
undesirable phenomena, stop using the product
immediately and contact us or your dealer.
Please recycle this device at an appointed disposal
location.
This product is not suitable for those lacking relevant
knowledge and experience, please use under the
supervision and guidance of professionals.
Please charge this device once every three months to
avoid shortening its battery life.
Please use the recommended power adapter to charge
this device. Power adapter is not provided by TP-LINK.
1 LED blinking
1 LED on
Off
LED Display Battery Level
0%~25%
25%~50%
50%~75%
75%~100%
100%
2A: 7h
1A: 10h
