TP-Link TM-IP5600 User manual

4 5
3) Plug the internal modem, fasten the modem after confirming you
have plugged well. Put back the case.
4) Plug one end of the phone line into LINE port on the modem.
If you want to use a telephone on the same line, use the RJ11
cable attached to connect the telephone to the PHONE port
of the Modem.
4. Software Installation
Assuming your system is windows 2000, other windows system is
similar.
1) When power on your computer, Windows 2000 will detect a new
hardware, PCI Device, click Next.
2) Device Driver Wizard window will appear. Choose the default
option Search for the best driver for your device
(Recommended) and click the Next button.
3) Choose Specify a location, Click Next.
4) Input the directory of the driver or click Browse o the driver
directory of your CD driver. (The details please refer to the
directory label on the CD bag.)
5) Click Next, Windows will prompt the digital-signature has not
been found, Click Yes.
6) Click Finish.
In Win98, the driver installation is similar to the above; you may
choose the default option to finish the installation. After the
installation, if there is a prompt to install “WAVE DEVICE FOR
VOICE MODEM” just cancel it.
5. Dial for connection to Internet
1) In Win98, please confirm that you have installed the “Dial
network”in the Windows components “Communication”.
2) In Win98, please confirm that you have installed TCP/IP protocol.
3) To establish Dial-connection (e.g. Win2k).
Go into Control Panel\Network and Dial-up Connections,
double-click New connection, click Next.
Choose Dial to specified Network, click Next.
Input the telephone number dialed, click Next.
You may allow all users in Win2k or only you to use the
connection. Click Next.
Input the name of the Dial Connection.
Finish.
The basic configurations have been finished. You can dial to connect
to the Internet. You can also click the Property in the Connection
dialog box to set other configurations.
Appendix: Contact Information
TP-LINK TECHNOLOGIES CO., LTD.
For help with the installation or operation of the TP-LINK TM-IP5600/
TM-IA5629V Modem, please contact us.
Add:
E-mail: [email protected]
Website: http://www.tp-link.com
3/F., Building R1-B, Hi-tech Industrial Park, Shennan Rd.,
Shenzhen, P.R.China
User's Guide
56K Internal PCI Fax Modem
TM-IP5600/TM-IA5629V
Made in China
7106503628
REV:1.0.4

1 2 3
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a
registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other
brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specifications may be reproduced in any form or by
any means or used to make any derivative such as translation,
transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright ©2011 TP-LINK
TECHNOLOGIES CO., LTD. All rights reserved.
Package Contents
The following contents should be found in your box:
One Internal Modem
One User's Guide
One RJ11 Cable
One Driver CD
Note: If any of the above contents is damaged or missing, please
contact the retailer from whom you purchased the TM-IP5600/TM-
IA5629V Modem for assistance.
1. Introduction
Thank you for choosing the TP-LINK internal Modem for your
personal computer. Now you can experience the high quality of
communication products for your computer application.
This manual provides the operating instruction for user installation
procedures. If you encounter any problem during the installation or
using your modem that cannot be solved with the help of this
manual, please do not hesitate to contact your dealer for technical
support.
2. Feature
Data Modem Communication Protocol:
ITU-T V.92/V.90, 56Kbps
ITU-T V.34, 33600 to 2400 bit/s
ITU-T V.32bis, V.32
ITU-T V.22bis,V.22
ITU-T V.23, V.21
Bell 212A,103
Fax Protocol:
ITU-T V.17, V.29, V.27ter, and V.21 Channel 2
TIA/EIA 578 class 1 FAX, Fax Speed High to 14400bps
Voice (only for TM-IA5629V):
Voice/Audio Mode
Speaker/MIC jack
Data Correct: V.42 LAPM and MNP2-4
Data Compression: V.44/V.42 bis and MNP5
Command System: EIA/TIA 578 Class 1 Concurrently Hays AT
Command
Operating System Support: Windows 98, Windows ME,
Windows2000, Windows XP, and Windows 7
Flow Control: XON/XOFF or RTS/CTS
Protect Circuit: Internal arrester circuit
V.92 and V.44 New Features:
Modem On Hold
Quick Connect
PCM UP Stream
V.44 Data Compression
Note: V.92 and V.44 function need network support.
3. Hardware Installation
The basic steps for hardware installation is as follows:
1) Turn off your computer. Then open the case of your Computer.
2) Put off the metal cover on the PCI bus slot whic h you would like to
install the modem.