TP-Link Archer VR500v Operator's manual

Kogan Internet Modem
QUICK INSTALLATION QUIDE

What’s in the box?
KOGAN INTERNET MODEM WARRANTY CARD
GREY
TELEPHONE CABLE
BLUE
ETHERNET CABLE
YELLOW
ETHERNET CABLE
POWER
ADAPTOR
QUICK START GUIDE
Getting to know
your Modem
Please take the time to check what’s in
your Kogan Internet Modem box as well
as the various lights, buttons and ports
on your device.
Kogan Internet Modem
QUICK START QUIDE

The LED lights on your Kogan Internet Moden will indicate
the status of your service.
Your Modem LED Indicators
LED Status Indication
Power is on.
Power is off.
DSL synchronization is complete.
DSL synchronization is in progress.
DSL synchronization failed.
Internet connection is available.
No internet connection.
The 2.4GHz wireless radio band is enabled.
The router is transmitting or receiving data via 2.4GHz band.
The 2.4GHz wireless radio band is disabled.
The 5GHz wireless radio band is enabled.
The router is transmitting or receiving data via 5GHz band.
The 5GHz wireless radio band is disabled.
Turns on when a WPS synchronization is established and
automatically turns off about five minutes later.
A wireless device is trying to connect to the network via WPS.
This process may take up to 2 minutes.
A device is connected to the WAN port.
The WAN port is sending or receiving data.
No device is connected to the WAN port.
A device is connected to the LAN port.
The LAN port is sending or receiving data.
No device is connected to the LAN port.
The USB device is ready to use.
USB device is being identified, or data is being transferred.
No USB device is plugged into the USB port.
On
Off
On
Flashing
Off
On
Off
On
Flashing
Off
On
Flashing
Off
On/Off
Flashing
On
Flashing
Off
On
Flashing
Off
On
Flashing
Off
Power
DSL
Internet
Wireless
2.4GHz
Wireless
5GHz
LAN
USB
WPS
WAN
1 2 3 4 5 6 7 8 9
1
2
3
4
5
6
7
8
9
Getting to know
your Modem
Front Panel
Back Panel
On/O
Reset
Phone Gigabit
LAN Ports
Gigabit
WAN Port
Power WLAN/WPS
DSL
USB Port

For FTTP (Fibre to thepremises) and HFC connections:
You'll need to connect your Kogan Internet Modem to the NTD
(nbn™ connection box) in your home.
For HFC connections:
Connect the Ethernet cable (the one with the blue ends) and
plug one end into the blue WAN port of your Kogan Internet
Modem and the other end into the UNI-D Port on your NTD
which nbn™ have supplied, this port can be found on the
back of the NTD. Make sure that the NTD is plugged into the
wall power plug and turned on.
For FTTP connections:
Connect the Ethernet cable (the one with the blue ends) and plug
one end into the blue WAN port of your Kogan Internet Modem
and the other end into the first UNI-D Port on your NTDwhich
nbn™ have installed, this port can be found on the bottom of
the NTD.
For FTTN connections:
Connect one end of the grey telephone cable directly into
your telephone wall socket, and the other end into the
grey DSL port on the Kogan Intenet Modem.
Connect one end of the power adaptor to your
WAN PORT DSL PORT
Kogan Internet Modem and the other end into a
power point and switch this on.
Connecting to nbn once
your service is ready
When you receive an email from us that your
nbn™ service has been successfully
activated it’s time to complete the setup of
your Kogan Internet modem.
Connecting your power supply
Set up your nbnTM Broadband
connection

Network Name – the names of the Wi-Fi hotspots broadcast by your Kogan Internet Modem.
Wireless Key – the password to be used to login to the Wi-Fi hotspots.
Dashboard Login – once connected to your Kogan Internet Modem this is the URL and login details to use to
access the dashboard.
Connect your compatible Wi-Fi devices to the Wi-Fi Network Name (‘the SSID’)
using the Wireless Key (‘the Wi-Fi password) from the label underneath your
Kogan Internet Modem.
You may also choose to change the default Wi-Fi Network Name and Wireless
Key to make them easier to remember. You can do this through the Kogan Internet
Modem dashboard. Refer to the following page of this guide for information on how
to access the dashboard.
SAMPLE LABEL ONLY
Setting up your Wi-Fi
A
B

If you are experiencing diculties connecting via Wi-Fi or
when using an Ethernet cable, please try the following:
Power the device o
Check that the cables have been plugged in correctly
Aer 2 minutes, power on the device again
Wait for the internet light to turn solid green
If you are still experiencing diculties connecting, you can access more
information in the help section at koganinternet.com.au/support
Your Kogan Internet Modem comes with
a dashboard which allows you to:
• Change your Wi-Fi Network Name and Wireless Key details
• Manage advanced internet and Wi-Fi settings
Once connected to your Kogan Internet Modem via Wi-Fi or
an Ethernet cable you can access the dashboard by typing
http://tplinkmodem.net into your browser and using the login
details from the label underneath your Kogan Internet Modem.
Advanced Settings
Troubleshooting Tips