Traceable 9446075 User manual

SPECIFICATIONS
Display: ½” high 4-Digit LCD
Probe Range: –58.0 to 158.0°F/–50.0 to 70.0°C
Resolution: 0.1°
Accuracy: ±1°C (between –20 to 70°C)
THERMOMETER
To activate the battery, remove the insulating tape from
the battery compartment. The battery is used to supply
power to the unit during low light conditions.
DISPLAYING °F OR °C
Press the °C/°F switch to toggle display temperatures
from Celsius to Fahrenheit
WALL MOUNTING
Convenient magnet on back allows for mounting of unit
on any magnetic surface.
ALL OPERATIONAL DIFFICULTIES
If this thermometer does not function properly for any
reason, please replace the battery with a new high quality
battery (see “Battery Replacement” section). Low battery
power can occasionally cause any number of “apparent”
operational difculties. Replacing the battery with a new
fresh battery will solve most difculties.
BATTERY REPLACEMENT
A faint display, no display, erratic readings, or operational
difculties indicate that the battery should be replaced.
Remove the battery cover, located on the back of the
unit, by pulling with thumb or forenger in direction of
the arrow. Replace the battery with a new 1.5V, G-13
battery. Equivalent battery replacements are: RAYOVAC
RW42, DURACELL D357, and EVEREADY 357. Insert
the battery with the positive side visible. Replace the
battery cover.

©2016 92-4123-40 Rev. 0 083116
TRACEABLE
SOLAR-POWERED
THERMOMETER
INSTRUCTIONS
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com