OPERATING INSTRUCTIONS
Normal display shows inside and outside temp in 1/10
degree.
1. One point temp control
D +LJK7HPS$OHUW´Źµ
— Slide switch to temp “Alert” posi-
tion, press “Alert Select” to select
+LJK7HPS$OHUW³Ÿ´PRGH
— Press “Hi Set” to set desired High TempAlert.
— Press “Alert On/Off” to turn on the High TempAlert.
³$OHUW´ÀDJDSSHDUVRQGLVSOD\
² $ODUPVDQG/&'ÀDVKHVVHFHYHU\RQHPLQZKHQ
the sensed temp is higher than the set temp.
E /RZ7HPS$OHUW´Żµ
— Slide switch to temp “Alert” position, press “Alert
6HOHFW´WRVHOHFW/RZ7HPS$OHUW³ź´PRGH
— Press “Lo set” to set desired Low
TempAlert.
— Press “Alert On/Off” to turn on the
/RZ7HPS$OHUW$OHUWÀDJDSSHDUV
RQGLVSOD\
²$ODUPVDQG/&'ÀDVKHVVHF
HYHU\RQHPPZKHQWKHVHQVHG
temp is lower than the set temp.
FITTING THE OUTSIDE SENSOR: LOCATE OUTSIDE
SENSOR AWAY FROM DIRECT SUNLIGHT AND
HEAVY SATURATION.
2. Two point temp control
a. Inside Temp Alert “ µ
— Slide switch to temp “Alert” posi-
tion, press “Alert Select” to select
Inside Temp Alert “ ” mode.
— Press “Hi set” to set the desired upper temp alert
YDOXH
— Press “Lo set” to set the desired lower temp alert
YDOXH
— Press “Alert on/off” to turn, on the Inside TempAlert.
³$OHUW´ÀDJDSSHDUVRQGLVSOD\
²$ODUPVDQG/('ÀDVKHVVHFHYHU\RQHPPZKHQ
the sensed temp is within the set temp.
b. Outside Temp Alert “ µ
— Slide switch to temp “Alert” posi-
tion, press “Alert select” to select
Outside Temp Alert “ ” mode.
— Press “Hi set” to set the desired
XSSHUWHPSDOHUWYDOXH
— Press “Lo set” to set the desired lower temp alert
YDOXH
— Press “Alert on/oft” to turn on the Outside TempAlert.
³$OHUW´ÀDJDSSHDUVRQGLVSOD\
² $ODUPVDQG/('ÀDVKHVVHFHYHU\RQHPPZKHQ
the sensed temp is outside the set temp.
6OLGHVZLWFKWR´7HPSµSRVLWLRQDIWHUVHWWLQJ
temp alert.
$OHUWRII
Press “Alert on/off” in temp “Alert” position, “Alert”
ÀDJGLVDSSHDUVRQGLVSOD\
BATTERY REPLACEMENT:
• 1 Pc “AAA” or “UM4” battery
• Insert the battery as direction indicated.
8VH¿QJHUQDLOWROLIWXSEDWWHU\FRYHUDQGLQVHUWEDWWHU\DV
to indicated direction.
EASY MOUNTING OF BRACKET ON WALL BY:
— Double-sided tape or
— Screws
www. .com information@itm.com1.800.561.8187
