Transition Networks SISTM1040-262D-LRT User manual

16 10/100TX + 2 10/100/1000T/
Mini-GBIC Combo
Managed Industrial Switch
User Manual
SISTM1040-262D
V1.00
Jul 2009

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Content
Chapter 1 Overview ................................................. 1
1.1 Introduction .................................................... 1
The MINI-GBIC Advantage ............................................ 1
High-Speed Transmissions............................................ 1
Dual Power Input ........................................................... 2
Flexible Mounting........................................................... 2
Advanced Protection...................................................... 2
Easy Troubleshooting .................................................... 2
1.2 Features ......................................................... 3
1.3 Technical Specification .................................. 5
1.4 Package Contents.......................................... 8
1.5 Safety Precaution........................................... 8
Chapter 2 Hardware Description ............................ 9
2.1 Physical Dimension........................................ 9
2.2 Front Panel..................................................... 9
2.3 Bottom View ................................................. 10
2.4 LED Indicators.............................................. 11
Chapter 3 Hardware Installation........................... 13
3.1 Installation Steps.......................................... 13
3.2 DIN-Rail Mounting........................................ 14
3.3 Wall Mount Plate Mounting .......................... 16
3.4 Wiring the Power Inputs............................... 17
3.5 Wiring the Fault Alarm Contact .................... 18
3.6 Cabling ......................................................... 19

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Chapter 4 Network Application ............................ 24
4.1 X-Ring Application........................................ 25
4.2 Coupling Ring Application............................ 26
4.3 Dual Homing Application.............................. 27
4.4 Central Ring Application............................... 28
Chapter 5 Console Management .......................... 29
5.1 Connecting to the Console Port ................... 29
5.2 Pin Assignment ............................................ 29
5.3 Login in the Console Interface ..................... 30
5.4 CLI Management.......................................... 32
5.5 Commands Level ......................................... 32
Chapter 6 Web-Based Management..................... 34
6.1 About Web-based Management .................. 34
6.2 Preparing for Web Management.................. 34
6.3 System Login ............................................... 35
6.4 System Information ...................................... 36
6.5 IP Configuration ........................................... 37
6.6 DHCP Server ............................................... 39
6.6.1 System configuration ..................................... 40
6.6.2 Client Entries ................................................. 42
6.6.3 Port and IP Bindings ...................................... 43
6.7 TFTP ............................................................ 44
6.7.1 Update Firmware ........................................... 44
6.7.2 Restore Configuration .................................... 45
6.7.3 Backup Configuration..................................... 46

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.8 System Event Log ........................................ 47
6.8.1 Syslog Configuration...................................... 47
6.8.2 System Event Log—SMTP Configuration ...... 49
6.8.3 System Event Log—Event Configuration ....... 51
6.9 Fault Relay Alarm......................................... 53
6.10 SNTP Configuration ..................................... 54
6.11 IP Security.................................................... 58
6.12 User Authentication...................................... 60
6.13 Port Statistics ............................................... 61
6.14 Port Control.................................................. 63
6.15 Port Trunk .................................................... 65
6.15.1 Aggregator setting........................................ 65
6.15.2 Aggregator Information ................................ 67
6.15.3 State Activity................................................ 73
6.16 Port Mirroring ............................................... 75
6.17 Rate Limiting ................................................ 77
6.18 VLAN configuration ...................................... 79
6.18.1 Port-based VLAN......................................... 80
6.18.2 802.1Q VLAN............................................... 83
6.19 Rapid Spanning Tree ................................... 89
6.19.1 RSTP System Configuration ........................ 89
6.19.2 Port Configuration........................................ 91
6.20 SNMP Configuration .................................... 93
6.20.1 System Configuration................................... 93
6.20.2 Trap Configuration ....................................... 95
6.20.3 SNMPV3 Configuration................................ 96

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.21 QoS Configuration........................................ 99
6.21.1 QoS Policy and Priority Type ....................... 99
6.21.2 Port-based Priority ..................................... 101
6.21.3 COS Configuration..................................... 101
6.21.4 TOS Configuration ..................................... 101
6.22 IGMP Configuration.................................... 103
6.23 X-Ring ........................................................ 105
6.24 Security—802.1X/Radius Configuration .... 108
6.25.1 System Configuration................................. 108
6.25.2 Port Configuration...................................... 110
6.25.3 Misc Configuration ..................................... 112
6.25 MAC Address Table................................... 113
6.26.1 Static MAC Address................................... 113
6.26.2 MAC Filtering ............................................. 115
6.26.3 All MAC Addresses.................................... 116
6.26.4 MAC Address Table—Multicast Filtering.Error!
Bookmark not defined.
6.26 Factory Default........................................... 117
6.27 Save Configuration..................................... 118
6.28 System Reboot........................................... 119
Troubles shooting ................................................. 120
Appendix A—RJ-45 Pin Assignment ................... 121
RJ-45 Pin Assignments........................................ 121
Appendix B—Command Sets............................... 125
System Commands Set ............................................. 125
Port Commands Set................................................... 128

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Trunk Commands Set................................................ 130
VLAN Commands Set................................................ 132
Spanning Tree Commands Set.................................. 134
QOS Commands Set ................................................. 136
IGMP Commands Set................................................ 137
Mac / Filter Table Commands Set.............................. 138
SNMP Commands Set............................................... 139
Port Mirroring Commands Set.................................... 141
802.1x Commands Set .............................................. 142
TFTP Commands Set ................................................ 144
SystemLog, SMTP and Event Commands Set........... 145
SNTP Commands Set................................................ 147
X-ring Commands Set................................................ 148

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
1
Chapter 1 Overview
1.1 Introduction
The 16 10/100TX + 2 10/100/1000T/ 100/1000 Mini-GBIC Combo Managed Switch is a
cost-effective solution and meets the high reliability requirements demanded by
industrial applications. The 16 10/100TX + 2 10/100/1000T/ 100/1000 Mini-GBIC Combo
Managed Switch can be easily managed through the Web GUI. Using fiber port can
extend the connection distance that increases the network elasticity and performance. It
also provides the X-Ring function that can prevent the network connection failure.
The MINI-GBIC Advantage
The MINI-GBIC fiber slots provide a lot of flexibility when planning and implementing a
network. The slot can accept any SFP-type fiber module and these modules are
designed for transmitting over distances of either 550m (multi-mode), 10km, 30km, 50km,
70km or 110km (single-mode)—and the slot supports SFP modules for WDM single-fiber
transmissions. This means that you can easily change the transmission mode and
distance of the switch by simply pulling out the SFP module and plugging in a different
module. The SFP modules are hot-swappable and plug-and-play.
High-Speed Transmissions
The 16 10/100TX + 2 10/100/1000T 100/1000 Mini-GBIC Combo Managed Industrial
Switch includes a switch controller that can automatically sense transmission speeds
(10/100/1000 Mbps). The RJ-45 interface can also be auto-detected, so MDI or MDI-X is
automatically selected and a crossover cable is not required. All Ethernet ports have
memory buffers that support the store-and-forward mechanism. This assures that data is
properly transmitted.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
2
Dual Power Input
The redundant power input design of 16 10/100TX + 2 10/100/1000T 100/1000 Mini-
GBIC Combo Managed Industrial Switch is with power reserve protection to prevent the
switch device broken by wrong power wiring. When one of power input is fail, P-Fail LED
will turn on and send an alarm through a relay output for notifying user.
Flexible Mounting
16 10/100TX + 2 10/100/1000T 100/1000 Mini-GBIC Combo Managed Industrial Switch
is compact and can be mounted on a DIN-rail or panel, so it is suitable for any space-
constrained environment.
Advanced Protection
The power line of 16 10/100TX + 2 10/100/1000T 100/1000 Mini-GBIC Combo Managed
Industrial Switch supports up to 3,000 V
DC
EFT protection, which secure equipment
against unregulated voltage and make systems safer and more reliable. Meanwhile,
6,000 V
DC
ESD protections for Ethernet ports make 16 10/100TX + 2 10/100/1000T
100/1000 Mini-GBIC Combo Managed Industrial Switch more suitable for harsh
environments.
Easy Troubleshooting
LED indicators make troubleshooting quick and easy. Each RJ-45 port has 2 LEDs that
display the link status, transmission speed and collision status. Also the three power
indicators PWR1, PWR2 and P-Fail help you diagnose immediately.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
3
1.2 Features
System Interface/Performance
RJ-45 ports support auto MDI/MDI-X function
SFP (Mini-GBIC) supports 100/1000 Dual Mode
Store-and-Forward switching architecture
Back-plane (Switching Fabric): 7.2Gbps
1Mbits Packet Buffer
8K MAC Address Table
Power Supply
Wide-range Redundant Power Design
Power Polarity Reverse Protect
Overload Current Protection
VLAN
Port Based VLAN
Supports 802.1Q Tag VLAN
GVRP
Port Trunk with LACP
QoS (Quality of Service)
Supports IEEE 802.1p Class of Service
Per port provides 4 priority queues
Port Base, Tag Base and Type of Service Priority
Port Mirror: Monitor traffic in switched networks
TX Packet only
RX Packet only
Both of TX and RX Packet
Security
Port Security: MAC address entries/filter
IP Security: IP address security management to prevent unauthorized intruder
Login Security: IEEE 802.1X/RADIUS