True TSID-96-3 User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TSID-96-3
TSID-96-3
Model Doors
Capacity
(Cu. Ft.)
(liters) Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†HHP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TSID-96-3 3 32
907
496
1/2
2452
291/4
743
501/4
1277
1/2115/60/1 9.8 5-15P 9
2.74
775
352
3/07
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
and lower utility costs in an attractive
display case that brilliantly displays deli
meats and cheese.
Cabinet is NSF-7 certified to hold open
food product.
Oversized, factory balanced,
refrigeration system holds 38°F to
40°F (3.3°C to 4.4°C). Gravity coil
refrigeration system provides high
humidity environment for exceptional
preservation of meats and deli
products.
“Low-E”, double pane thermal glass
front display and self-closing rear
doors provide maximum insulation
value for greater efficiency and energy
savings.
Exterior - non-peel or chip white
laminated vinyl; durable and
permanent.
Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless steel floor with coved corners.
Entire cabinet structure is foamed-
in-place using high density, CFC free,
polyurethane insulation.
Case is equipped with front and rear
light sources for maximum product
display. Fluorescent lamps are low
UV emitting to enhance product
appearance and increase shelf life.
Automatic defrost system; time-
initiated, time-terminated.
Display Case:
Single Duty Deli Case
†Depth does not include 5/8" (16 mm) for door handles.
R
®

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TSID-96-3 TFQY22E TFQY45S TFQY22P TFQY223
TSID-96-3
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, and lower utility costs in an
attractive display case that brilliantly displays
deli meats and cheeses.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Gravity coil refrigeration system provides
high humidty environment for exceptional
preservation of meats and deli products.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures of
38°F to 40°F (3.3°C to 4.4°C).
• Automatic defrost system; time-initiated, time-
terminated.
• Condensing unit located behind grill in back
of unit. Entire system slides out for easy
cleaning and maintanance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip laminated vinyl;
white sides with black front and back grills.
• “Low-E”, double pane thermal front viewing
glass provides maximum insulation value for
greater efficiency and energy savings.
• Front viewing glass slanted 12.52° to minimize
reflection from overhead lighting enhancing
your cold product presentations.
• Stainless steel counter top provides surface
for equipment such as registers and point-of-
purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel floor
with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with legs levelers.
DOORS
• Rear door assemblies feature “Low-E”, double
pane thermal glass. The latest in energy
efficient technology.
• Each door fitted with 12" (305 mm) long
handle.
• Self-closing doors. Sliding doors ride on
stainless steel V-Channel with stainless steel
bearings for smooth, even, positive closure.
Doors fit within plastic channel frame.
SHELVING
• Four (4) adjustable, heavy duty PVC coated
wire shelves. Two (2) top shelves dimensions
are 451/2"L x 171/2" D
(1156 mm x 445 mm). Two (2) bottom shelves
dimensions are 453/4"L x 19"D
(1163 mm x 483 mm). Two (2) chrome plated
shelf clips and one (1) center cantilevered
bracket per shelf.
• Aluminum shelf support and pilasters and
stainless steel shelf support center pilasters.
Shelves are adjustable on 1/2" (13mm)
increments.
LIGHTING
• Case is equipped with front and rear light
sources for maximum product display.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast and
T-8 bulbs for brighter illumination, longer bulb
life and increased energy efficiency. Lamps are
safety shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1 phase
- 15 amp dedicated outlet. Cord and plug set
included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒2
1/2" (64 mm) diameter castors.
❒4" (102 mm) diameter castors.
❒Ratchet locks (requires 2).
❒Additional shelves.
❒Low height models with 413/4" (1061 mm)
work surface height.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
REAR VIEW RIGHT VIEW
Display Case:
Single Duty Deli Case
293/4"
(756 mm)
211/2"
(547 mm)
13/16"
(21 mm)
19/32"
(16 mm)
295/32"
(741 mm)
12.52°
961/2"
(2452 mm)
501/4"
(1277 mm)
121/32"
(306 mm)
13/16"
(21 mm)
301/2"
(775 mm)
311/2"
(801 mm)
3/16"
(5 mm)
171/2"
(445 mm)
19"
(483 mm)