
STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TCGR-59
TCGR-59
DESIGN
• True’s refrigerated bakery case combines
efficient, high volume merchandising
and exceptional refrigeration with an
elegant curved glass front for sophisticated
presentation of high end desserts and pastries.
• Designed to provide an attractive companion
to our “dry” display case.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser maintains 38°F to 40°F (3.3°C to
4.4°C), ideally suited for bakery products.
• Forced-air refrigeration system; sealed, cast
iron, self-lubricating evaporator fan motor
and larger fan blades give True refrigerated
bakery cases a more efficient low velocity, high
volume airflow design.
• Condensing unit located behind removable
panel in back of unit; slides out for easy
cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - white laminate front and side
panels. Color options available at no charge:
All laminate (and stainless option) ships
separately from unit and is field installed.
Stainless steel top. Black front and rear grills
and trim. Template kit available at no charge
for field customization of laminate.
• Interior - NSF approved white aluminum sides
and top; high impact plastic floor with coved
corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with leg levellers.
CURVED FRONT DISPLAY GLASS
• Insulated, double pane curved glass front and
side panels provide extra large viewing area
to maximize bakery product presentation.
Exterior pane is tempered for safety.
• Front glass tilts forward for easy cleaning.
REAR DOORS
• “Low-E”, double pane thermal glass insert
with mitered plastic channel frame.
• Each door fitted with 12" (305 mm) long
molded plastic handle.
• Self-closing doors, efficient counter balanced
weight system for smooth, even, positive
closure. Sliding doors ride on stainless steel V-
channel with stainless steel bearings. Doors fit
within plastic channel frame.
SHELVING
• Three (3) adjustable, lighted, heavy duty
PVC coated wire shelves 533/8"L x 225/32"D
(1356 mm x 563 mm). Shelving system is
cantilevered and angle can be adjusted to
maximize presentation.
• Each shelf supports a maximum weight of
150 lbs.
PAN CAPACITY
• Cabinet holds twelve (12) 18"L x 26"D
(458 mm x 661 mm) display pans (3 per level).
Pans supplied by others.
LIGHTING
• Cabinet equipped with four (4) light sources
for maximum product display; three (3) shelf
mounted and one (1) cabinet mounted.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Safety shielded lighting tube assure longer,
brighter, shadow-free product illumination.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• 5 amp exterior scale receptacle.
• Recessed exterior light switch and thermostat
control.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1
phase, 20 amp dedicated outlet. Cord and
plug set included.
RECOMMENDED OPERATION CONDITIONS
• TCGR models are designed to operate in an
environment where temperature and humidity
do not exceed 75°F (24°C) and 55% relative
humidity.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒2
1/2" (64 mm) diameter castors.
❒Custom exterior laminates, contact factory for
details. See our website: www.truemfg.com
for the latest color offerings.
❒Mirrored interior ends with laminate exterior.
❒Additional non-lighted shelves.
❒Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical service
department for BTU information.
Display Case:
Curved Glass Refrigerated Bakery Case
Walnut Teak Oak Beige Black White
115/60/1
NEMA-5-20R
351/2
"
(902 mm)
403/16"
(1021 mm)
BACK VIEW RIGHT VIEW
537/32
"
(1352 mm)
1613/32
"
(417 mm)
13.4°
4713/16"
(1215 mm)
277/8"
(709 mm)
597/8"
(1521 mm)
283/8"
(721 mm)
11"
(280 mm)
175/32"
(436 mm)