True TSID-72-3-L User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TSID-72-3-L
TSID-72-3-L
Model Doors
Capacity
(Cu. Ft.)
(liters) Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†HHP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TSID-72-3-L 3 25
708
172
1/2
1842
321/8
816
42
1067
1/3115/60/1 8.3 5-15P 9
2.74
515
234
†Depth does not include 5/8
" (16 mm) for door handles.
3/07
R
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
and lower utility costs in an attractive
display case that brilliantly displays
deli meats and cheeses.
Cabinet is NSF-7 certified to hold
open food product.
Oversized, factory balanced,
refrigeration system holds 38°F to
40°F (3.3°C to 4.4°C). Gravity coil
refrigeration system provides high
humidity environment for exceptional
preservation of meats and deli
products.
“Low-E”, double pane thermal glass
front display and self-closing rear
doors provide maximum insulation
value for greater efficiency and energy
savings.
Exterior - non-peel or chip white
laminated vinyl; durable and
permanent.
Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless steel floor with coved corners.
Entire cabinet structure is foamed-
in-place using high density, CFC free,
polyurethane insulation.
Case is equipped with front and rear
light sources for brilliant product
display. Fluorescent lamps are low
UV emitting to enhance product
appearance and increase shelf life.
Automatic defrost system; time-
initiated, time-terminated.
Display Case:
Low Height Single Duty Deli Case

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
321/16"
(815 mm)
257/8"
(658 mm)
231/2"
(597 mm)
TSID-72-3-L TFQZ52E TFQZ50S TFQZ52P TFQZ523
TSID-72-3-L
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, and
lower utility costs in an attractive display
case that brilliantly displays deli meats
and cheeses.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Gravity coil refrigeration system
provides high humidity environment for
exceptional preservation of meats and
deli products.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 38°F to 40°F (3.3°C to
4.4°C).
• Automatic defrost system; time-initiated,
time-terminated.
• Condensing unit located behind grill in
back of unit. Entire system slides out for
easy cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip laminated
vinyl; white sides with black front and
back grills.
• “Low-E”, double pane thermal front
viewing glass provides maximum
insulation value for greater efficiency
and energy savings.
• Front viewing glass slanted 12° to
minimize reflection from overhead
lighting enhancing your cold product
presentations.
• Stainless steel counter top provides
surface for equipment such as registers
and point-of-purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel
floor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint
for corrosion protection.
• Frame rail fitted with leg levelers.
DOORS
• Rear door assemblies feature “Low-E”,
double pane thermal glass. The latest in
energy efficient technology.
• Each glass door is fitted with a 12"
(305 mm) long handle.
• Self-closing doors. Sliding doors ride on
stainless steel V-Channel with stainless
steel bearings for smooth, even positive
closure. Doors fit within plastic channel
frame.
SHELVING
• One (1) adjustable, heavy duty PVC
coated wire shelf 673/4"L x 22"D (1721
mm x
559 mm). Four (4) chrome plated shelf
clips included per shelf.
• Aluminum shelf support pilasters.
Shelves adjustable on 1/2" (13 mm)
increments.
LIGHTING
• Case is equipped with front and rear
light sources for maximum product
display. Fluorescent lamps are low UV
emitting to enhance product appearance
and increase shelf life.
• Cabinet lighting utilizes electronic ballast
and T-8 bulbs for maximum illumination,
longer bulb life and increased energy
efficiency. Lamps are safety shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒21/2" (64 mm) diameter castors.
❒4" (102 mm) diameter castors.
❒Ratchet locks (requires 2)
❒Additional non-lighted shelves (lighted
shelf available as replacement only).
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant), consult
factory technical service department for
BTU information.
115/60/1
NEMA-5-15R
4115/16"
(1066 mm)
ELEVATION RIGHT VIEW
Display Case:
Low Height Single Duty Deli Case
721/2"
(1842 mm)
251/8"
(639 mm)
91/32"
(230 mm)
11/16"
(18 mm)
325/8"
(829 mm)
13/16"
(21 mm)
9/16"
(15 mm)
3/16"
(5 mm)
12°
22"
(559 mm)