True VC900 User manual

OWNER’S
MANUAL
VC900
PALISADE CLIMBER
MODEL VC900
(MAN-VC900 REV00)

3
IMPORTANT!
All products shown are prototype. Actual product delivered may vary.
Product specifications, features, and software are subject to change without notice.
For the current owner’s manual and documents in additional languages please visit
https://truefitness.com/support/user-manuals/
IMPORTANTE!
Todos los productos mostrados son prototipos. La realidad el producto suministrado puede diferir. Especificaciones de
productos, características y software están sujetas a cambios sin previo aviso.
Para la más actualizada de este manual del propietario y para los documentos en otros idiomas, por favor visite
https://truefitness.com/support/user-manuals/
IMPORTANT! Tous les produits présentés sont prototype. Le produit réel livré peut varier. Spécifications du produit,
caractéristiques et logiciels sont sujettes à modification sans préavis. Pour la plus à jour le manuel du propriétaire et pour
documents dans des langues supplémentaires, veuillez https://truefitness.com/support/user-manuals/ de visite
ꄆ金䬠炐
侁炐䢦僗◲⿁氳⸊㑔ն㲓ꡮ◬♀氳◲⿁⺎耇僗䢦┘⺱◲⿁鈺劲Ⱶ耇⽰鯻♭㞝僗催䷊䔮┘⺁车鵠湳鲃☫╙塛㵒◇㛻㛢丘氳✳
榫陱伺░⽰㵒◇⪭☽陪銨氳乄勮陴阼ꠋhttps://truefitness.com/support/user-manuals/
ھام!
جمیع المنتجات المعروضة ھي النموذج. قد تختلف المنتج الفعلي تسلیمھا.
مواصفات المنتج، والمیزات والبرامج قابلة للتغییر دون إشعار.
لمعظم ما یصل حتى الآن دلیل المالك یرجى زیارة www.truefitness.com /support/user-manuals/
للمستندات في لغات إضافیة، یرجى زیارة https://truefitness.com/support/user-manuals/
WICHTIG!
Alle hier gezeigten Produkte sind Prototypen. Das tatsächliche Produkt ausgeliefert wird, kann variieren. Produkt-
Spezifikationen, Funktionen und Software können sich ohne vorherige Ankündigung ändern. In den meisten Fällen bis zu
Bedienungsanleitung Bisher besuchen und für Dokumente in weiteren Sprachen finden Sie unter https://truefitness.com/
support/user-manuals/
BELANGRIJK!
Alle getoonde producten zijn prototype. Daadwerkelijke product geleverd kan verschillen. Product specificaties,
eigenschappen & software zijn onderhevig aan verandering zonder kennisgeving. Voor de meest actuele handleiding van
de eigenaar & voor documenten in andere talen kunt u terecht op https://truefitness.com/support/user-manuals/
ВАЖНО!
Все товары указаны прототипа. Фактический продукт, поставляемый могут отличаться. Технические
характеристики, особенности ипрограммного обеспечения могут быть изменены без предварительного
уведомления. Для получения самой последней на сегодняшний день руководство по эксплуатации и
Для документов на другие языки, пожалуйста, посетите https://truefitness.com/support/user-manuals/

4
Thank You for Choosing TRUE!
Since its founding in 1981, TRUE Fitness has been built on two core guiding principles: Build the highest quality
products and support them with superior service. Today, TRUE is the global leader in premium fitness equipment for the
commercial and residential markets.
Over the years, the fitness industry has changed, new markets have sprung up, and the needs of our customers have
evolved, but those principles remain constant, and we remain ever-vigilant in working to achieve them.
In keeping with our values, TRUE has always striven to equip our machines with the latest technology and safety features
since the beginning, giving our customers the very best exercise experience possible while providing peace of mind.
As your dedicated partner, we will do whatever it takes to keep your facility going strong. Our experienced team provides
end-to-end service, from facility planning and maintenance to providing your machines with the newest technologies. You
can count on TRUE Fitness for the best service in the industry, provided by a team focused on optimizing the life of your
equipment.
Contacting Our Support Team
Before you contact TRUE, we recommend gathering the serial number, model number, and a brief description of the
reason for your request. After you have all the pertinent information, we suggest you contact your selling dealer or local
service company to set up an appointment. If you are not familiar with who is in your area, you can visit
https://shop.truefitness.com/store-locator/ and use our store locator to obtain the contact information for the closest dealer.
If you still need help, please contact our product support team.
Address TRUE Fitness
Attn: Product Support
865 HoffRoad
St. Louis, MO 63366
Phone [phone]
Email service@truefitness.com
Hours of Operation Monday - Thursday 8:30am - 6:00pm (CST)
Friday 8:30am - 5:00pm (CST)
Contacting Our Sales Team
Interested in owning more TRUE products? Please contact us with any product inquires so that we may direct you to the
appropriate sales representative to help answer your questions.
Address TRUE Fitness
Attn: Sales Department
865 HoffRoad
St. Louis, MO 63366
Phone [phone]
Email sales@truefitness.com
Hours of Operation Monday - Friday 8:30am - 5:00pm (CST)

5
Reporting Freight Claims or Parts Damage
Unfortunately, sometimes materials can be damaged during shipment. If materials are damaged during shipment, please
follow the guidelines below to determine the appropriate process for you to follow.
Severe Damage—Obvious damage to external packaging and internal product.
Please refuse the shipment and it will be returned to TRUE by the carrier. Contact TRUE product support by calling
800.883.8783 or sales support by calling 800.426.6570 Monday-Friday during normal business hours to notify us that the
shipment has been refused. Once we have received the damaged shipment, a replacement shipment will be sent to you.
If the shipment comes in multiple boxes, only refuse boxes with damage.
Slight Damage—Minimal damage to external packaging with unknown internal damage to product.
If the shipment has minimal damages and you are not sure if the actual product is damaged, you must sign the bill of
lading as damaged when accepting the shipment. Once you have opened the box and you have determined something
is indeed damaged, please gather the serial number, model number, description of damage, and photos of damage.
Please make sure the photos include the damaged product as well as the damaged box the product arrived in. Contact
TRUE product support (service@truefitness.com // 800.883.8783) or TRUE sales support (sales@truefitness.com //
800.426.6570) Monday-Friday during normal business hours.
Concealed Damage—No damage to external packaging but internal damage to product.
You may receive a shipment that looks intact and discover once the box has been opened that there are hidden damages.
Please notify the carrier immediately. TRUE will not be able to file a claim if the carrier is not notified in a timely manner.
Once you have called the carrier you will need to gather the serial number, model number, description of damage, and
photos of damage. Contact TRUE product support (service@truefitness.com // 800.883.8783) or TRUE sales support
(sales@truefitness.com // 800.426.6570) Monday-Friday during normal business hours.

6
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS...........................................................................7
POWER REQUIREMENTS....................................................................................................................................................9
SPACE REQUIREMENTS....................................................................................................................................................10
SPECIFICATIONS..................................................................................................................................................................11
PALISADE CLIMBER ENTRY AND EXIT SAFETY ..............................................................................................................11
WARNING DECALS.............................................................................................................................................................11
COMPLIANCES....................................................................................................................................................................11
ASSEMBLY INSTRUCTIONS
PREASSEMBLY CHECKLIST...............................................................................................................................................12
ASSEMBLY STEPS..............................................................................................................................................................14
PRODUCT OVERVIEW
PRODUCT FEATURES........................................................................................................................................................26
CARE AND MAINTENANCE
INSPECTION........................................................................................................................................................................27
CLEANING THE EQUIPMENT.............................................................................................................................................27
LEVELING THE MACHINE................................................................................................................................................27
PREVENTATIVE MAINTENANCE........................................................................................................................................28
LONG TERM STORAGE......................................................................................................................................................28
ADDITIONAL INFORMATION
TROUBLESHOOTING..........................................................................................................................................................29
WIRING DIAGRAM...............................................................................................................................................................33
WARRANTY INFORMATION
COMMERCIALLIMITED WARRANTY...................................................................................................................................34
RESIDENTIAL COMMERCIAL LIMITED WARRANTY..........................................................................................................35
TABLE OF CONTENTS

7
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS
This equipment is intended for a commercial or institutional setting. This owner’s manual should be accessible to all
personal trainers, faculty, and members.
• Read and understand all instructions and warnings prior to use.
• Obtain a medical exam before beginning any exercise program. If at any time during exercise you feel faint, dizzy, or
experience pain, stop and consult your physician.
• Obtain proper instruction prior to use.
• This unit is intended for commercial use only.
• Inspect the unit for incorrect, worn, or loose components and do not use until corrected, replaced, or tightened prior to
use.
• Do not wear loose or dangling clothing while using the unit.
• Care should be used when mounting or dismounting the unit.
• Read, understand, and test the emergency stop procedures before use.
• Disconnect all power before servicing the unit.
• Do not exceed maximum user weight of 400 lbs (181 kg).
• Keep the top side of the moving surface clean and dry.
• Keep children and animals away.
• Use caution when moving and assembling unit.
• All exercise equipment is potentially hazardous. If attention is not paid to the conditions of equipment usage, death, or
serious injury could occur.
!WARNING: To reduce the risk of burns, fire,
and electric shock or injury to persons, follow these
instructions:
• Heart rate monitoring systems may be inaccurate.
Over-exercising may result in serious injury or death.
If you feel faint, dizzy, or experience pain, stop
exercising immediately.
• Health related injuries may result from incorrect or
excessive use of exercise equipment.
• TRUE STRONGLY recommends seeing a physician
for a complete medical exam before undertaking an
exercise program, particularly if the user has a family
history of high blood pressure or heart disease, is
over the age of 45, smokes, has high cholesterol,
is obese or has not exercised regularly in the past
year. Additionally, TRUE recommends consulting
a fitness professional on the correct use of this
product.
• Equipment should be immediately taken out of
use if it fails to work properly or when a warning is
presented electronically.
• When using this exercise machine, basic
precautions should always be followed.
• Use this equipment only for its intended use as
described in this manual.
• Do not move the equipment by lifting the console.
Do not use the console as a handlebar during a
workout.
• This product can expose you to chemicals including
Toluene and Acrylamide which are known to the
State of California to cause Cancer and birth defects
or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
• Keep equipment stable on flat ground.
• Risk of personal injury-crushing hazard when
equipment is in operation. Keep feet, hands, and
fingers away from moving parts.
• Replace warning labels that may be worn, damaged,
or missing.
• Replace any non-working or damaged components,
remove the unit from service until repair is
performed.
• Do not operate the equipment while being covered
with a blanket, pillow, plastic, or anything that
insulates or stops airflow. Keep air openings free of
lint, hair or any obstructing material.
• Any changes or modifications to this equipment
could void the product warranty.
• Do not use this product in areas where aerosol spray
products are being used or where oxygen is being
administered. Such substances create the danger of
combustion and explosion.
• Do not use this product outdoors, near water, while
wet, or in areas of high humidity including extreme
temperature changes.
• Close supervision is necessary when used near
children under the age of 15, or disabled persons.

8
• Wear shoes with rubber or high traction soles. Do
not use shoes with heels, leather soles, cleats or
spikes. Make sure no stones are embedded in the
soles. Do not use this product in bare feet. Keep
all loose clothing, shoelaces and towels away from
moving parts.
• Avoid the possibility of bystanders being struck or
caught between moving parts by making sure that
they are out of reach of the equipment while it is in
motion.
• Do not use typing or web surfing features at
excessive speeds. Always stabilize yourself when
using typing or web surfing features. (Varies by
console option.)
• Never place liquids of any type directly on the
unit except in the accessory tray or bottle holders.
Containers with lids are recommended.
• Always follow the console instructions for proper
operation.
• Allow only one person at a time on the equipment
while it’s operating.
• Use the side handrails whenever additional stability
is required. In case of emergency, such as tripping,
the side handrails should be grabbed, and the user
should place his/her feet on the side platforms.
The front handlebars should be used to grasp the
heart rate sensors or to rest the hand on while
operating the activity zone keys, but not for stability,
emergency, or continuous use.
• To avoid injury, stand on the side steps before
starting the equipment.
• Avoid exiting the equipment while the steps are in
motion.
• Never walk backwards on the equipment.
• When mounting the equipment, ensure the steps
are not in motion and then proceed with one step
at a time to maintain balance using the handrails as
needed.
• While the equipment is in use, proceed at a speed
that the user can safely maintain with the ability
to immediately engage the safety key to stop the
machine if necessary.
• Do not allow animals on or near the equipment while
in operation.
• Do not reach into or underneath the unit, or tip it on
its side during operation.
• To avoid serious injury, never touch the steps while
the machine is in use.
• Do not use if you have a cold or fever.
• This equipment is not intended for use by
persons with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge,
unless they are supervised or have been given
instruction concerning use of the equipment by a
person responsible for their safety.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made
by children without supervision.
• Do not use attachments not recommended by the
manufacturer.
• Allow only trained personnel to service this
equipment.
• It is the sole responsibility of the owner/operator
to ensure regular and scheduled maintenance is
performed.
!DANGER:
• To reduce the risk of electric shock, always unplug
this product when not in use, before cleaning, or
attempting any maintenance activity. Do not handle
the plug with wet hands.
• Use a TRUE AC power cord only.
• Position this product so the power cord plug is
accessible to the user.
• Keep the power cord away from heated surfaces. Do
not pull the equipment by the power cord or use the
cord as a handle. Do not run the power cord along
the side or under the equipment.
• If the electrical supply cord is damaged it must be
replaced by the manufacturer, an authorized service
agent, or a similarly qualified person to avoid a
hazard.
• This product must be connected to a properly
grounded electrical outlet.
• Never insert objects into any openings in this
product. If an object should drop inside, turn offthe
power, unplug the power cord from the outlet and
carefully retrieve it. If the item cannot be reached,
contact TRUE product support.
• To avoid serious injury, remove and store the power
cord when the machine is not in use.
• This appliance should never be left unattended when
plugged in.
• Do not use any type of extension cord with this
product.
• Never operate a TRUE product if it has a damaged
power cord or electrical plug, or if it has been
dropped, damaged, or even partially immersed in
water.

9
POWER REQUIREMENTS
Read and understand all instructions before plugging any TRUE power cord into an electrical outlet.
DEDICATED LINE
This product does not require a dedicated line.
GROUNDING INSTRUCTIONS
This product must be grounded. If the product malfunctions or breakdowns, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
grounding pin
grounded
outlet grounded outlet
FIGURE A
grounding pin
FIGURE B
!DANGER:
• Improper connection of the equipment grounding
conductor can result in risk of electrical shock.
• Check with a qualified electrician or service provider
if you are in doubt as to whether the equipment is
properly grounded or installed on a dedicated line.
• Seek a qualified electrician to perform any
modifications to the cord or plug. TRUE is not
responsible for injuries or damages as a result of
cord or plug modification.
• To reduce the risk of burns, fire, electric shock, or
injury, it is imperative to connect each product to a
properly grounded 110V or 220V electrical outlet.
The voltage required for your unit is located on the
serial number decal (usually on the front of the unit).
Depending on where you live voltage requirements
differ.
• Some TRUE products require a circuit rated 110V,
60 Hz, and 20 amps. In the United States, most
residential homes have circuits rated 110V, 60 Hz,
and 15 amps. If your unit requires a 20 amp outlet,
contact an electrician to install a dedicated 20 amp
circuit prior to use.
• 110 Volt—This model is for use on a nominal
110V circuit and has a grounding plug that looks
like the plug illustrated in figure A. Make sure the
product is connected to an outlet having the same
configuration as the plug. No adapter should be
used with this product.
• 220 Volt—This model is for use on a circuit having
a nominal rating no less than 208V and more than
240V and is factory equipped with a specific electric
cord and has a grounding plug that looks like the
plug illustrated in figure B. Make sure that the
product is connected to an outlet having the same
configuration as the plug in figure B. No adapter
should be used with this product. If the product must
be reconnected for use on a different type of electric
circuit, the reconnection should be made by qualified
service personnel.
Power Information
Model Line Voltage
(V)
Frequency
(Hz)
Rated
Current
(Amps)
Number of
Units per
Circuit
Plug/Outlet* Max Power Dissipation
(Watt)
VC900
110 50/60Hz 20
Up to 3
machines per
circuit—DO NOT
exceed
NEMA 5-20
550 watts per machine
220 50/60Hz 15
Up to 3
machines per
circuit—DO NOT
exceed
NEMA 6-15*
550 watts per machine
*The plug configuration for the power adapter may vary by country.

10
SPACE REQUIREMENTS
TRUE recommends a minimum of:
• 12” (30.5cm) on each side and the front of the equipment
• 36” (91.4cm) safety zone at the rear of the equipment
• 10 feet (3.1 meters) for a ceiling height
36”
(91.4 cm)
12”
(30.5 cm)
12”
(30.5 cm)
12”
(30.5 cm)
SPECIFICATIONS
• DIMENSIONS (L X W X H)
60.4” x 31.5” x 87.5” / 153.4 cm x 80 cm x 222.3 cm
• STEP DIMENSIONS (L X W X H)
8” x 11.2” x 20” / 20.3 cm x 28.4 cm x 50.8 cm
10 feet
(3.1 meters)
side side
front
rear
ceiling
• STEP-UP HEIGHT
13.3” / 33.7 cm
• MAXIMUM USER WEIGHT
400 lbs / 181.4 kg

11
PALISADE CLIMBER ENTRY AND EXIT SAFETY
WARNING DECALS
!WARNING: Replace warning labels that may be worn, damaged, or missing.
To replace any worn or missing decals contact TRUE product support (service@truefitness.com // 800.883.8783).
COMPLIANCES
This equipment complies with all applicable codes and regulations. For a complete list of compliances, please visit
www.truefitness.com.
base serial
number location
console serial
number location
To Enter:
• Step up onto the lower, rear steps one at a time
while gripping both handrails for support.
• Step up onto the upper, rear steps one at a time
while gripping both handrails for support.
• Position both feet on the lowest step closest to the
upper, rear steps while gripping the contact heart
rate handlebars.
To Exit:
• At the conclusion of the workout after the steps
have ceased all movement, position both feet on the
upper, rear steps one at a time while gripping the
handrails.
• Step down onto the lower, rear steps one at a time
while maintaining a grip with both hands on the
handrails.
• Step down onto the floor one foot at a time while
maintaining a grip with both hands on the handrails.
Rating: 100-240 V, 50/60 Hz, 25 W
20-VC900XXXXA
VC900-20
3110024
Intertek Testing Services Taiwan Ltd.
Model No.
Serial No./Date Code
CONFORMS TO ANSI/UL
STD.1647
CERTIFIED TO CAN/CSA
STD. C22.2 NO.68
SAMPLE
MAXIMUM USER WEIGHT: 181 kg [400 LBS]
PRODUCT: Palisade Climber
TYPE: VC900
CLASS: SB
STANDARD: EN ISO 20957-1, EN ISO 20957-8
TOWARD
STAIRS
Install with cable tie on
user left side.
Route cable through cable
tie.
upper frame weldment decals

12
ASSEMBLY INSTRUCTIONS
PREASSEMBLY CHECKLIST
BASIC GUIDELINES FOR SETTING UP THE
EQUIPMENT
After removing the equipment from the packaging, place
the equipment on a clean, level surface. Make sure the
electrical cord easily reaches a grounded three-pronged
outlet.
!DANGER: Do not use an extension cord or
ungrounded outlet. The ground helps prevent electrical
damage to your equipment and enhances your safety
by helping to prevent shock. Check with a qualified
electrician or serviceman if you are in doubt as to
whether the equipment is properly grounded. Do not
modify the plug provided with the unit if it will not fit
the outlet. Have a proper outlet installed by a qualified
electrician.
Use caution when assembling this product.
Unpacking and assembling of this product is
a two person task.
VERIFY BOX CONTENTS
IMPORTANT! Please verify box contents. If you
have questions, or if there are any missing parts,
contact product support (service@truefitness.com //
800.883.8783).
!CAUTION:
TOOLS NEEDED FOR ASSEMBLY
6mm Allen Wrench
17mm Wrench and 17mm Socket Wrench
#2 Phillips Screwdriver
Wire Cutters
Level
(recommended)
Lifting Straps
(recommended)
NOTE: Supplemental video available on vimeo.com:
https://vimeo.com/octanefitness/truefitness-palisade-assembly
TO UNBOX THE MACHINE
1. After opening the product box, remove all smaller
parts, boxes, and plastic wrapping.
2. On each side of the machine, remove the protective
wood from the top of the base and from each
handrail.
3. From each side of the machine, remove the three zip
ties securing the product to the shipping palette.
4. Carefully tilt the product base upward to position the
lifting straps underneath. Using two people, carefully
lift the product offthe shipping palette and place on
the ground.
5. If the product is near its final resting position,
carefully tilt the product on each side and adjust the
leveling feet until the product base is parallel with
the ground. DO NOT tilt the product base too far on
either side to avoid damaging the plastics.
6. If the product is far from its final resting position, use
the moving wheels to move the product into place
and then adjust the four leveling feet to verify the
machine is level with the ground.
on each side,
snip zip ties
on each side, and for
each handrail, remove
protective wood
lifting straps
leveling foot moving wheel

13
18 27
24
9
9
5
2
15
15
5
5
53
20
20
20
20
20
20
7
8
1
23
25
26
4
11
4
12
6
17
17
10
16
16
28
13
21
22
21
15
13
13
14
19
19
14
22
ITEM PART DESCRIPTION QTY
1 VC90003 WELDMENT, UPPER FRAME 1
2
VC90009 WELDMENT, CUP HOLDER RING, LH 1
3
VC90010 WELDMENT, CUP HOLDER RING, RH 1
4
VC90019 BRACKET, HAND RAIL CLAMP 2
5
VC90030 INSERT, CUP HOLDER PAD 8
6
VC90080 CABLE, VC900 POWER 1
7
VC90090 SHROUD, TOP, WITH DECAL 1
8
VC90103 SHROUD, INNER GUARD 1
9
VC90111 PLASTIC, CUP HOLDER 2
10
VC90112 COVER, MAST BASE 1
11
VC90117 COVER, HANDRAIL BASE, LH 1
12
VC90118 COVER, HANDRAIL BASE, RH 1
13
VC90148 PHMS, M5-0.8 X 12MM, ZP 7
14
VC90151 WASHER, FLAT, M8 X 18 OD X 1.5, BLK, ZP 4
15
VC90167 BHCS, M8-1.25 X 12MM, SS 4
16
VC90168 HHS, M10-1.50 X 50MM, NYLOC, BLK ZP 4
17
VC90169 HEX NUT M10 X 1.5 X 8 BZ 4
18
VC90175 PHMS, M5-0.8 X 6MM, ZP 1
19
VC90176 SHCS, M8-1.25 X 20MM, BLK ZP 4
20
VC90179 PHMS, M5-0.8 X 12MM, BLK SS 7
21
VC90205 SHCS, M8-1.25 X 20MM, SS 4
22
VC90206 WASHER, FLAT, M8 X 18 OD X 1.5, SS 4
23
VC90250 VC900 BASE ASSEMBLY 1
24
VC90251-20 SUBASSEMBLY, CONSOLE MAST, 30MM E-STOP 1
25
VC90254-01 ASSEMBLY, LEFT HANDRAIL & HR GRIP, FULL DIPPED 1
26
VC90255-01 ASSEMBLY, RIGHT HANDRAIL & HR GRIP, FULL DIPPED 1
27
VC90258 SUBASSEMBLY, CONSOLE REAR COVER W/ SALUTRON 1
28
VC900-TRAY COVER, SWEAT TRAY (OPTIONAL KIT) 1
BOX CONTENTS

14
ASSEMBLY STEPS
STEP 1—ATTACH THE UPPER FRAME TO THE BASE
Parts Used in this Step
PART DESCRIPTION QTY
VC90003 WELDMENT, UPPER FRAME 1
VC90250 VC900 BASE ASSEMBLY 1
VC90176 SHCS, M8-1.25 X 20MM, BLK ZP 4
VC90151 WASHER, FLAT, M8 X 18 OD X 1.5, BLK, ZP 4
Tools Used in this Step
6mm Allen Wrench
T
OWARD
S
TAIRS
Insta
llwithcabletie on
Routecablethroughcable
userleftside.
tie.
VC90176
VC90003
VC90151
VC90250
TOWARD
STAIRS
Install with cable tie on
user left side.
Route cable through cable
tie.

15
T
O
W
ARD
S
T
A
I
R
S
Insta
l
l
wi
t
hcabl
e
t
i
e on
userleft si
d
e.
tie.
Rout
e
cab
le
th
r
o
ug
hc
a
b
l
e
STEP 2—ATTACH THE INNER GUARD SHROUD TO THE FRAME
Parts Used in this Step
PART DESCRIPTION QTY
VC90003 WELDMENT, UPPER FRAME 1
VC90250 VC900 BASE ASSEMBLY 1
VC90103 SHROUD, INNER GUARD 1
VC90148 PHMS, M5-0.8 X 12MM, ZP 4
Tools Used in this Step
#2 Phillips Screwdriver
VC90103
VC90003
VC90148
VC90250

16
STEP 3—ROUTE CABLES FROM BASE UP CONSOLE MAST AND ATTACH MAST TO FRAME
Parts Used in this Step
PART DESCRIPTION QTY
VC90003 WELDMENT, UPPER FRAME 1
VC90090 SHROUD, TOP, WITH DECAL 1
VC90112 COVER, MAST BASE 1
VC90251-20 SUBASSEMBLY, CONSOLE MAST, 30MM E-STOP 1
VC90205 SHCS, M8-1.25 X 20MM, SS 4
VC90206 WASHER, FLAT, M8 X 18 OD X 1.5, SS 4
Tools Used in this Step
6mm Allen Wrench
!CAUTION: Avoid
damage to the cables.
NEVER route cables near
the steps or by any moving
part of the machine.
NOTE: You will be securing
the cables to the frame with
zip ties and then fastening
the top shroud in step 9.
1. Slide the mast cover and top shroud onto the console mast.
2. Route the base cables around the inner guard shroud, up through the hole of the upper frame, and through the
console mast. To pull the cables through the console mast, use the provided pull string to attach the base cables to
the inside of the console mast, and then pull the string/base cables up through the console mast.
3. Attach the console mast to the upper frame. Use a 6mm allen wrench to fasten securely.
VC90003
VC90205
VC90206
VC90251-20
base
cables
inner
guard
shroud
mast cover
console mast
top shroud
VC90090
VC90112

17
VC90117
VC90118
handrail mount bracket
VC90254-01
VC90255-01
STEP 4—CONNECT HANDRAIL AND CONSOLE MAST CABLES
1. Slide the handrail covers onto the handrails.
2. Connect the contact heart rate and thumb switch cables between the handrails and console mast and then slide the
handrails onto the console mast.
3. Position the bottom of the handrails by the handrail mount brackets.
VC90251-20
Parts Used in this Step
PART DESCRIPTION QTY
VC90251-20 SUBASSEMBLY, CONSOLE MAST, 30MM E-STOP 1
VC90254-01 ASSEMBLY, LEFT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90255-01 ASSEMBLY, RIGHT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90117 COVER, HANDRAIL BASE, LH 1
VC90118 COVER, HANDRAIL BASE, RH 1

18
STEP 5—ATTACH CUP HOLDER RINGS
Parts Used in this Step
PART DESCRIPTION QTY
VC90251-20 SUBASSEMBLY, CONSOLE MAST, 30MM E-STOP 1
VC90254-01 ASSEMBLY, LEFT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90255-01 ASSEMBLY, RIGHT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90009 WELDMENT, CUP HOLDER RING, LH 1
VC90010 WELDMENT, CUP HOLDER RING, RH 1
VC90030 INSERT, CUP HOLDER PAD 8
VC90167 BHCS, M8-1.25 X 12MM, SS 4
Tools Used in this Step
6mm Allen Wrench
VC90167
VC90251-20
VC90255-01
VC90254-01
VC90010
VC90030
VC90009
1. Loosely fasten the cup holder rings to the console mast and handrails. DO NOT fully tighten the hardware until step 7.
2. Attach the cup holder pads onto the inner side cup holder rings (4 pads per ring).

19
VC90168
VC90019
VC90169
Loosely attach the handrails and brackets to the base frame. DO NOT fully tighten hardware until step 7.
Parts Used in this Step
PART DESCRIPTION QTY
VC90250 VC900 BASE FRAME 1
VC90254-01 ASSEMBLY, LEFT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90255-01 ASSEMBLY, RIGHT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90019 BRACKET, HAND RAIL CLAMP 2
VC90168 HHS, M10-1.50 X 50MM, NYLOC, BLK ZP 4
VC90169 HEX NUT M10 X 1.5 X 8 BZ 4
Tools Used in this Step
17mm Wrench and 17mm
Socket Wrench
STEP 6—ATTACH HANDRAILS TO BASE FRAME
VC90255-01
VC90254-01
VC90250

20
Parts Used in this Step
PART DESCRIPTION QTY
VC90250 VC900 BASE FRAME 1
VC90254-01 ASSEMBLY, LEFT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90255-01 ASSEMBLY, RIGHT HANDRAIL & HR GRIP, FULL DIPPED 1
VC90117 COVER, HANDRAIL BASE, LH 1
VC90118 COVER, HANDRAIL BASE, RH 1
VC90111 PLASTIC, CUP HOLDER 2
Tools Used in this Step
17mm Wrench and 17mm
Socket Wrench
6mm Allen Wrench
STEP 7—TIGHTEN HARDWARE AND PLACE CUP HOLDERS AND COVERS IN PLACE
VC90111
1. Using a 6mm allen wrench, securely fasten the cup holder rings, and then insert the cup holders into place.
2. Using a 17mm wrench and socket wrench, securely fasten the handrails, and then slide the handrail covers down and
tuck into the base.