U-Line H-2171 User manual

PAGE 1 OF 2 0714 IH-2171
MODULAR
WORKSTATIONS
π1-800-295-5510
uline.com
H-2171, H-2172
H-2173, H-2174
H-2298, H-2299
1. Place bench top on a smooth, non-marring surface
with top side facing down.
2. Partially insert eight #14 x ¾" hex head slotted
wood screws into predrilled holes in top, leaving
approximately 1⁄8" between top and screw heads.
Use holes located 61⁄2" from the front and back
edges and 131⁄2" apart. (See Figure 1)
3. Remove top two drawers or open cabinet doors.
4. Place cabinets squarely 30" apart for 60" tops, or 42"
apart for 72" tops.
5. Set top assembly on cabinets, placing bolt heads in
keyhole slots, and then slide forward. (See Figure 2)
6. Position top so that ends of top are flush with cabinet
sides and tighten all screws.
7. Replace drawers or close cabinet doors.
Figure 1
WOOD OR LAMINATE TOP ASSEMBLY
HARDWARE
Figure 2
#14 x 3⁄4" Wood Screws x8 ¼" - 20 x 5⁄8" Bolts x16

PAGE 2 OF 2 0714 IH-2171
STEEL TOP ASSEMBLY
1. Place bench top on a smooth, non-marring surface
with top side facing down.
2. Four channels are supplied with top. Loosely attach
two channels to ends of top with four ¼" - 20 x
5⁄8" bolts, leaving approximately 1⁄8" between bolt
heads and channel. Channels should rest between
flange and top. (See Figure 3)
NOTE: four weld nuts are provided in each
channel.
3. Bolt two additional channels to holes approximately
141⁄4" from either end of top using ¼" - 20 x 5⁄8"
bolts as above. (See Figure 3)
4. Insert two ¼"- 20 x 5⁄8" bolts into weld nuts in each
channel leaving about 5⁄8" between channel and
bolt head. (See Figure 4)
5. Remove top two drawers or open cabinet doors.
6. Place cabinets squarely 30" apart for 60" tops, or 42"
apart for 72" tops.
7. Set top assembly on cabinets, placing bolt heads in
key hole slots, then slide forward. (See Figure 5)
8. Position top so that ends of top are flush with side of
cabinets and tighten all screws.
9. Replace drawers or close cabinet doors.
Figure 3
Figure 4
Figure 5
π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com