U-Line H-3630 User manual

PAGE 1 OF 2 0113 IH-3630
H-3630, H-3631
H-3632, H-3633
STEEL ASSEMBLY TABLE
1-800-295-5510
uline.com
π
HARDWARE INCLUDED
• (4) 3/8" x 3" Bolts
• (4) 3/8"Flange nuts
STARTER TABLE
NOTE: Install all bolts and nuts prior to tightening.
1. Unfold leg assemblies. (See Figure 1)
2. Unfold flat braces and line up with holes in leg
assemblies. Install to leg using 3/8" x 3" bolts and
nuts. (See Figure 2)
ADJUSTING TABLE HEIGHT
1. Remove pre-installed leg bolt and adjust leg to
desired table height. Reinstall leg bolt and nut.
(See Figure 3)
NOTE: When adjusting to the lowest height
setting, the flat brace bolts must be removed
from the leg assemblies. Reinstall flat brace
bolts after leg bolts are inserted.
2. With the aid of a helper, turn table upright.
(See Figure 4)
3. If the table is a stand alone table, all nuts can be
tightened to 40-50 foot pounds.
NOTE: Do not tighten if add-on tables
will be attached.
For assembly of add-on tables, see page 2.
TOOLS NEEDED
9/16" Wrench (2)
ASSEMBLY INSTRUCTIONS
Figure 1
3/8 x 3" Bolts
and Nuts
Flat Brace
Figure 2
Leg bolt
Desired
Table
Height
Leg bolt
Figure 3
Figure 4

PAGE 2 OF 2 0113 IH-3630
HARDWARE INCLUDED
• (2) 3/8" x 3/4" Bolts
• (2) 3/8" x 3" Bolts
• (4) 3/8" Flange nuts
ASSEMBLY OF ADD-ON TABLES
1. Repeat steps on page 1 for leg assembly.
2. With the aid of a helper, align add-on table to
starter table. The holes on the underside of both
table tops should line up. Install (2) 3/8" x ¾" bolts
and nuts through holes provided. (See Figure 5)
NOTE: To create a flat working surface
between tables, you may need to lift
the corners of add-on table when nuts
are tightened.
3. Unfold remaining flat braces on add-on table
and line up with leg assembly on starter table.
Remove starter leg brace bolt. Install braces
from both tables to leg assembly using the
same starter leg brace bolt. (See Figure 6)
4. After all starter and add-on tables have been
assembled, all nuts can be tightened to 40-50
foot pounds.
(2) 3/8 x 3/4" Bolts
and Nuts
Starter Leg
Brace Bolt
Starter
Table
Add-On
Table
Flat Brace
ADD-ON TABLE INSTRUCTIONS
Figure 5
Figure 6
πCHICAGO•ATLANTA•DALLAS•LOSANGELES•MINNEAPOLIS•NYC/PHILA•SEATTLE•MEXICO•CANADA
1-800-295-5510
uline.com