Uniden DTL-8R-1 User manual

UserOperation Specification
CordlessPhone forPBX
DTZ-8R-1
Ver0.02
APRVDCHECKED(E) CHECKED(S) CHECKED(M) ISSUED
Copyright 2014 Uniden.All rightsreserved.

1
TableofContents
1. Overview____________________________________________________ 5
1.1 Introduction___________________________________________________5
1.2 Digital interface mode___________________________________________5
2. Features____________________________________________________ 6
2.1 Handset_______________________________________________________8
2.2 BaseStation ___________________________________________________9
2.3 Chargeunit___________________________________________________ 10
2.4 Key&SW ____________________________________________________ 11
2.4.1 Handset_____________________________________________________11
2.4.2 Base________________________________________________________11
2.4.3 Charger______________________________________________________11
2.5 ToneTypeand Volume_________________________________________ 12
2.5.1 Frequencydefinition___________________________________________12
2.5.2 Handset tonetypes ____________________________________________12
2.5.3 Handset volume_______________________________________________13
2.5.4 Ringcadence_________________________________________________14
2.5.5 BaseStationtone_____________________________________________15
2.5.6 Charger______________________________________________________15
2.6 Display ______________________________________________________ 16
2.6.1 Handset LCD display__________________________________________16
2.6.1.1 Message fromPBX Expansion board________________________________ 17
2.6.2 Handset LCD Icons____________________________________________18
2.6.3 Handset LED _________________________________________________19
2.6.4 BaseLED____________________________________________________21
2.6.5 Charger LED_________________________________________________21
3. Operation & Setup___________________________________________22
3.1 Power Up____________________________________________________ 22
3.1.1 Handset_____________________________________________________22
3.1.2 BaseStation__________________________________________________22
3.2 Power Down__________________________________________________ 22
3.2.1 Handset_____________________________________________________22
3.2.2 Base________________________________________________________22
3.3 Communication to the PBX______________________________________ 23
3.3.1 Serialinterface________________________________________________23
3.3.2 Local operation_______________________________________________23
3.3.3 PBX commandfromtheBaseStationtoPBX Expansionboard_______24
3.3.4 PBX commandfromPBX Expansionboardto theBaseStation _______25
3.4 NECPBXoperation____________________________________________ 26
3.4.1 Changewiredphoneandcordlessphone(DTL-8R-1Handset) ________26
3.4.2 Makingcalltoother Expansion__________________________________26
3.4.3 Receiving aCallfromother Expansion____________________________29

2
3.4.4 Makingcalltooutsideline______________________________________30
3.4.5 Receiving aCallfromoutsideline(DependonPBXline)_____________31
3.4.6 FinishTalkMode______________________________________________32
3.4.7 Training mode(entry)__________________________________________33
3.4.8 Training mode(Next(Softkey1)key:select item)___________________33
3.4.9 Training mode(Func(Softkey2) key: changeeachitem setting)_______33
3.4.10 Training mode(0key: nofunction)_______________________________33
3.4.11 Training mode(Exit(softkey4) key:exitfromtheTrainingmode)_____34
3.5 REDIAL (Option)_______________________________________________ 34
3.6 Channelchange_______________________________________________ 35
3.7 Auto Stand-by_________________________________________________ 35
3.8 PBXNoService _______________________________________________ 35
3.9 OutOfRange_________________________________________________ 36
3.10 LowBattery_________________________________________________ 37
3.10.1 Batterystatus________________________________________________37
3.11 Mute _______________________________________________________ 37
3.12 HandsFree_________________________________________________ 37
3.13 Headset____________________________________________________ 37
3.14 Volume setting______________________________________________ 38
3.15 Ring VolumeSetting _________________________________________ 39
3.15.1 Ringer volumeselection________________________________________39
3.16 Menu setting mode___________________________________________ 40
3.16.1 Menu Top____________________________________________________40
3.16.2 Contacts(List)________________________________________________41
3.16.3 Contacts(showonebyone)_____________________________________41
3.16.4 Contacts(DeleteContact) _______________________________________42
3.16.5 Contacts(Edit/Add)____________________________________________42
3.16.6 Settings(List)_________________________________________________44
3.16.7 Settings(MenuTimeout) ________________________________________44
3.16.8 Settings(Brightness)___________________________________________44
3.16.9 Settings(Power Save)__________________________________________45
3.16.10 Settings(AudioEqualizer)_____________________________________45
3.16.11 Settings(KeyLock)__________________________________________46
3.16.12 Sounds(List)________________________________________________46
3.16.13 Sounds(RingTones)_________________________________________47
3.16.14 Sounds(Vibrate)_____________________________________________47
3.16.15 Sounds(Out Of RangeAlert)___________________________________48
3.16.16 Sounds(KeyTone)___________________________________________48
3.16.17 Language__________________________________________________49
3.16.18 AdministratorSetting(List)___________________________________49
3.16.19 AdministratorSetting(Registration)____________________________50
3.16.20 AdministratorSetting(De-Registration)_________________________51
3.16.21 AdministratorSetting(ChangePINcode)________________________52
3.16.22 AdministratorSetting(SiteSurvey)_____________________________53
3.16.23 AdministratorSetting(SiteSurvey:SyncDisplaymode)____________54
3.16.24 FunctionKeyLabel__________________________________________54

3
3.16.25 FunctionKeyLabel(NameEdit) ________________________________55
3.16.26 FunctionKeyLabel(DeleteLabel)______________________________55
3.17 KeyLock___________________________________________________ 56
3.18 Virtual Function Key__________________________________________ 56
3.19 BaseKeyOption (Option) T.B.D ________________________________ 56
3.20 SpeedDialSettings(Option) T.B.D _____________________________ 57
4. Appendix__________________________________________________58
4.1 DataTable____________________________________________________ 58
4.1.1 FactorySetting_______________________________________________58
4.1.2 Timings______________________________________________________58

4
Revision History
Ver
IssueDate
Originator Description
0.01 April 30,
2014 Shitara 1
st
Edition forNEC.This documentisreferred
EXP10000 operation specification Rev.1.1.
0.02 June 06,
2014 Shitara <Change Key assignment>
menu àmenu/mute
mute àspeaker
speaker àend
<Add> Basekey option,Speed Dial option

5
1.Overview
1.1Introduction
DTL-8R-1is the cordless phone thatisadapted fordigitalPBX(PrivateBranchExchange).It
isusuallyused in theofficeenvironment.When thisphoneisconnected tothe digital PBX, it
must haveadigital PBX Expansion boardinside theBaseStation.
PBX
Expansion
Board
Private
Branch
Exchange
(PBX)
WiredPhone
Base Handset
<Notes>
1)Handsetand wired phonecannotbe used atthe sametime.
2)Somedigital PBX Expansion boardsrequirethe wired phone tomakeacall.
3)Handsetand BaseStationmusthaveoriginal IDthatis written oneachunitatfactory.
1.2Digital interface mode
Whendigital PBX Expansion boardisattachedtothe BaseStation,DTL-8R-1works as
digitalmode.Eachdigital PBX maker will provide thedigital PBX Expansion board.
Inthismode,the Handsetwill transmit key press information,whichwillbe senttoPBX by
the BaseStationviaserial interface.
TheBaseStationreceivesPBX command from the digital PBXExpansionboardsuchas
LEDstate,LCD message,Ringerstate,andTalkpathcondition and transmitthemtothe
Handset.

6
2.Features
DTZ-8R-1
General
Frequency
1.9G(1920 -1930MHz)
AudioProcess
Digital(ADPCM)
Transmission TDMA/TDD
NumberofChannels
5
IDNo.
About130Kcombinationsormore
WiFiFriendly Yes
NumberofRFSlot 12(6)
HandsetExpandability
No/Yes(Option)
Compatibilityw/othermodels No
MultiBase No
MultiRepeater
Yes, up to6
Conference
atsameexpansion number No/Yes(Option)
HS-HSIntercom/RoomMonitor
atsameexpansion number
No
HS-HSTransferCall
atsameextension number
No
Direct Link(WalkieTalkie)
No
TalkTime
16hours
StandbyTime 7days
RemoteBase&SeparateCharger Yes
Wall Mountable
RoHS
Yes
AnalogMode No
(Wewill developnewanaloginterfaceboardnext stage)
PBX
Interface
AnalogPBXExpansion Board No
Repeater Baseconnection
the Basecanhandle2repeaterswitheach2simultaniouscalls.
Handsetconnection Eachrepeatercanhandle2simultanious calls.
DaisyChain
3
Base Page No
BaseSwitch Yes(Left, Right)
LED 3
PowerLED
BaseLeftLED
BaseRight LED
Feature

7
DTL-8R-1
Handset Key
29
ProgrammableKey(API)
12
LCD Display 2 x24
(10&16digit mode adjustable)
StandbyDisplay Depend on InterfaceBoard.
Thereareno Displaytimeoutand LED timeout on the Handset
Line StatusDisplay
No
DisplayLanguage
OnlyEnglish
Icon TalkIcon
BatteryStatusIcon (3level)
Ringer Off Icon
Message Icon
HandsFreeIcon
MuteIcon
LCD BackLightLED
Yes(White)
KeyBackLightLED
Yes(Orange)
NewMessage LED
No
LED
Function keyLED×8(Red)
HandsFree
Yes
PowerOff Key
No
KeypadLock
No
Phonebook
No
One TouchDial Yes, up to4(option)
(Number24digits/No Name)
Redial Yes(DependonI/FBoard)
(Localmode,32digits)
F8keyisredialifInterfaceboarddoes nothave thisfunction.
CID
No
BellinAutoTalk(charge off)
Yes(AlwaysOn)
AnyKeyAnswer
Yes((AlwaysOn,Dial0-9,*, #)
Ear VolumeControl 6 steps (default:4)
hearing aidcompatible
Handsfree VolumeControl
6steps (default:4)
HeadsetVolumeControl
6steps (default:4)
Ringer Volume High/Low/Off(Vibrate)(default:High)
changed inStandby&Bell Mode
Ringer Tone 6Kinds(default:Tone A)
Tone A,Tone B,Tone C,ToneD, Tone E,Tone F
Vibrating Ringer
Yes
OutofRangeDetection
Yes
OutofRangeAlarmTone Yes(On/Off)
(default:On)
Mute
Yes
AutoStandby(ChargeOn)
Yes
ChannelChange
Auto
Ringer Mute Yes
changed inStandby&Bell Mode
OnHookMenu Change RingerType
EndofRange Alarm
Register(Option)
Deregister(Option)
BaseRegistration PIN(Option)
One Touch DialSettings(Option)
Exit
Off HookMenu
-
HeadsetJack
Yes
Feature

8
Display Elements
<Notes>
1)Thisimagediffers from the actualdesign.
2.1Handset

9
2.2BaseStation

10
2.3Charge unit

11
2.4Key&SW
2.4.1Handset
talk key
speaker key
menu/mute key
end key
up key
down key
right key
left key
select key(center ofnavigationkeys)
dial (09、Ú、#)key
Softkey (14)key
<Notes>
1)Ifredial option isenable, Softkey4 keyis usedfor redial keyin Talkstate.
2)Ifbasekeyoption enable, Softkey1 keyisused for Base Left key inFunction key
state.
3)Ifbasekeyoption enable, Softkey2 keyisused for Base Right key inFunction key
state
2.4.2Base
Left key
Right key
2.4.3Charger
Chargerdoesn’t haveany key.

12
2.5Tone Type and Volume
2.5.1Frequencydefinition
A
3142Hz
G
2000Hz
M
1046Hz
S
494Hz
B
2637Hz
H
1900Hz
N
1000Hz
T
490Hz
C
2400Hz
I
1800Hz
O
831Hz U
480Hz
D
2346Hz
J
1600Hz
P
800Hz V
430Hz
E
2200Hz
K
1566Hz
Q
700Hz W
400Hz
F
2095Hz
L
1100Hz
R
500Hz
2.5.2Handsettonetypes
<Notes>
1)Bell ToneA-F depends onring cadencefromPBXExpansion board.
Bell Tone A K D RepeatedInfinitely
48ms 48ms
Bell Tone B O M RepeatedInfinitely
24ms 24ms 24ms
Bell Tone C F B A RepeatedInfinitely
48ms 48ms 48ms
Bell Tone D N J G RepeatedInfinitely
36ms 36ms 36ms
Bell Tone E Q J P RepeatedInfinitely
54ms 54ms 54ms
Bell Tone F L J RepeatedInfinitely
36ms 36ms
Key Touch Tone G
50ms
BeepTone S
150ms
RangeAlarmTone N N N
50ms 50ms 50ms 50ms 50ms
LowBattery AlertTone N
100ms
Error Tone R T U V W
50ms 50ms 50ms 50ms 50ms
ConfirmationTone I H G E C
50ms 50ms 50ms 50ms 50ms

13
2.5.3Handsetvolume
Volumesforeachtone areshownbelow.
Tone Type Level Comment
Key TouchTone LOW -
ErrorTone
HIGH
-
Confirmation Tone
HIGH
-
Battery
LowAlert Tone
LOW
Used towarning forbatterylow
RangeAlarm Tone
LOW
Used towarning foroutofRFlinkrange
Beep Tone LOW The PBX Expansion boardrequiresthis tone
Bell ToneA-F HIGH/MID/LOW/OFF
Itdependson RingerVolumeSetting.

14
2.5.4Ringcadence
Whenthe PBX Expansion boardsend ring statecommand totheBaseStation,itwillbe
transmitted tothe Handsetandthe Handset generates bell tone according tothe cadence,
whichisgiven byPBXExpansion board.
Cadence1
2sec
4sec
off
on
Cadence2
1sec
1sec
off
on 1sec
3sec
Cadence3
400ms
off
on 800ms
4sec200ms
400ms
200ms
Cadence4
1sec
2sec
off
on 2sec
4sec
Cadence5
200ms
100ms
off
on 600ms
4sec
200ms
100ms
<Notes>
1)Whenringer volumeisOff(Vibrate),Handsetvibratesaccording tothistiming（1.5s
on/1s off）in all the cadences.

15
2.5.5Base Stationtone
TheBaseStationdoesn’thaveanytone features
2.5.6Charger
Thecharger doesn’thaveanytone features

16
2.6Display
2.6.1HandsetLCD display
240 x320 QVGA LCD
Charactercodeset:ISO/IEC 8859-1(Latin-1)

17
2.6.1.1Messagefrom PBX Expansionboard
Whenthe Handsetreceives messagefromPBX Expansionboard.Message is shown
accordingtothe followings.
1.LCD isselectable24x2line(48digits), 16x2line(32digits) or10x2line(20digits),whichis,
determinedwhen IDiswritten atfactory.
2.Message shall beshownwithwordwrapping (48digits,32digits or 20digits).
3.IfHandsetcan notshow wordwrapping digits ononepage becauseofwordwrapping,
then message shall be divided into2pages
4.Ifmessage is shown on2pages, eachpage shall beautomaticallyswap 2.5seconds
periodically.
e.g.Show “a=Smith,j,20592 toFritzgerrald300 f”
2.5seconds
Message shall be erased when:
1.Newmessage isarrived
2.The user pressesvalidkey
3.PBXExpansionboardsendClearLCD command.
<Notes>
1)LCD is notimeout toclearthedisplay.Itisdependon the PBXExpansion board.

18
2.6.2HandsetLCD Icons
Talk icon
lHandsetTalk mode
lOther situation off
Battery Status Icon
lBatteryLevel
(full)(Level2)(Level1)(Low)(Warning)
lCharge On
<Notes>
1)Whenyou getonthe chargerwithbattery full, battery status icon shows battery full.
Antenna Level Icon
lAntennaLevel
Level 0123456
Ringer muteicon
lRingermuteison
lRingermuteisoffoff
Message icon
lMessage exists
lMessage doesn’texistoff
HandsFreeIcon
lHands Free Talk
lEarSpeakerTalkoff
MuteIcon
lMuteOn
lMuteOffoff
VibrateIcon
lVibrateOn
lVibrateOff off

19
2.6.3HandsetLED
1.Charge LED
ON:OnCradle (charging)
OFF: OffCradle (notcharging)
2.Virtual FunctionLEDs
All Function LEDsarecontrolled byPBXaccordingtothePBXcommand the BaseStation
willset eachLEDtoone ofcadencesbellow.
OFF
Alwaysoff
ON
Alwayson
Blinking 1
500ms
500ms Repeated Infinitely
off
on
Blinking 2
50ms
50ms Repeated Infinitely
off
on
Blinking 3
50ms
Repeated Infinitely
off
on
50ms 500ms
Blinking 4
350ms
50ms Repeated Infinitely
off
on
<Notes>
1)All Function LEDswill be turned off ifthe HandsetKeepsStandby modeanddoesn’t
receivePBX commandfor about5minutes.