Unitech MT650 User manual

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
MT650 Video TAS Terminal
MT650
Quick Reference Guide
Version 0.1

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Tour of the MT650
The following sections describe the main components and features of the
MT650.
MT650 Proximity + Finger Print Model
Rear

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Setting up the MT650
This section explains how to charge the battery and how to turn on the MT650
for the first time.
Opening the Back-plate
Follow these instructions to open the back-plate for accessing the MT650’s
internal components.
1. Insert the key provided into the
security lock and then turn the key
counterclockwise.
2. Lift the back-plate up to a
45-degree angle (1) and pull the
plate in the direction of the arrow
slightly to free the cover from the
back plate tabs (2).
3. Flip the back plate over to the left.
Connecting Power
Follow these instructions to connect power to the MT650.
1. Plug the 12V DC connector into the terminal block (1)

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
2. Plug the adapter into a power socket (2).
3. Switch on the battery switch to
charge the battery.
Charging the Battery
hours. The battery begins charging as soon as you connect the power cable.
p the system time zone, date and time.
in.
The MT650 welcome screen appears followed by the Windows CE screen.
The MT650 is featured with six functional buttons.
Before using the MT650 for the first time, you need to charge it for about 22
Turning ON the MT650 for the First Time
After you have initially charged your device for about 22 hours, the device is
ready to be used. You can now start up your device where you’ll calibrate the
display, and set u
Powering On
The MT650 automatically starts when the 12V DC power adapter is plugged-
Using the Keypad

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
The following table describes the keys.
Key Main Function
Clock-in
[F1]: Function Key
Break-out
[F2]: Function Key
Break-in
[F3]: Function Key
Clock-out
[F4]: Function Key
[ESC] Performs the same function as tapping the button on
the touch screen.
[ENTER] Enters a carriage return or executes a command.
Using the Finger Print Reader
The MT650 has an optional integrated
Finger Print reader that has a verification of
less than 2 seconds. The Finger Print
Reader comes with 4000 templates.
Testing Finger Print Verification
The MT650 has a built-in BIO ID Manager programs that enable the user to
test finger print verification. To test finger print verification:
For UPEC
1. Double-tap the My Device icon on
the Windows CE desktop.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
2. Double-tap the Flash Storage.
3. Double-tap the “06282010” folder.
4. Double-tap BioIDMgr to open the
program.
5. Tap Open to activate the program.
6. You will see the program running.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
For Suprema
1. Double-tap the My Device icon on
the Windows CE desktop.
2. Double-tap the Windows folder.
3. Double-tap SFM3020_Demo to
open the program.
4. Tap Connect to activate the
program.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
5. You will see the program running.
Using the Mifare Reader (for Suprema)
The MT650 has an optional integrated
Mifare reader that has verification in a few
seconds.
Testing Mifare Card Verification
1. Double-tap the My Device icon on
the Windows CE desktop.
2. Double-tap the Flash Storage.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
3. Double-tap the “PQT” folder.
4. Double-tap the “PDA_1.0” folder.
5. Double-tap PDA_1.0 to open the
program.
6. Input “4” in the column of Com
port and then tap Connect.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
7. For example, tap 14443A.. For example, tap 14443A.
8. Tap Read UID.
9. Tap Auto and bring the Mifare
Card close to the sensor. The
code will be read and displayed on
the following field.

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
10. You will see the program running.
Tap Stop Read to end reading.