UNITED OFFICE ULG 350 B1 Product information sheet

IAN 366662_2101
PLASTIFIEUSE
Mode d’emploi et consignes de sécurité
LAMINIERGERÄT
Bedienungsanleitung und Sicherheitshinweise
LAMINEERAPPARAAT
Gebruiksaanwijzing en veiligheidsvoorschriften
LAMINOVAČKA
Návod k obsluze a bezpečnostní pokyny
LAMINERINGSMASKINE
Betjeningsvejledning og sikkerhedsanvisninger
LAMINOVAČKA
Návod na obsluhu a bezpečnostné pokyny
LAMINATOR
Operating instructions and safety instructions
URZĄDZENIE DO LAMINOWANIA
Instrukcja obsługi i wskazówki bezpieczeństwa
PLASTIFICADORA
Instrucciones de uso e indicaciones de seguridad
LAMINATOR / LAMINIERGERÄT / PLASTIFIEUSE
ULG 350 B1

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
GB/ IE Operating instructions and safety instructions Page 1
DE/AT/CH Bedienungsanleitung und Sicherheitshinweise Seite 15
FR/BE Mode d‘emploi et consignes de sécurité Page 29
NL/BE Gebruiksaanwijzing en veiligheidsvoorschriften Pagina 47
CZ Návod k obsluze a bezpečnostní pokyny Strana 61
PL Instrukcja obsługi i wskazówki bezpieczeństwa Strona 75
SK Návod na obsluhu a bezpečnostné pokyny Strana 89
ES Instrucciones de uso e indicaciones de seguridad Página 103
DK Betjeningsvejledning og sikkerhedsanvisninger Side 117

1 2 3
56
74

GB│IE │ 1 ■
ULG 350 B1
Index
Introduction...................................................2
Information for these operating instructions..................................... 2
Copyright............................................................... 2
Limited liability ........................................................... 2
Intended use ............................................................ 2
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up and connecting to the power supply .....................4
Items supplied and transport inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Requirements on the installation site .......................................... 5
Electrical connection ...................................................... 5
Appliance description...........................................6
Handling and operation.........................................6
Suitable laminating pouches ................................................ 6
Switching levels .......................................................... 6
Preparing for hot lamination ................................................ 7
Preparing for cold lamination ............................................... 8
Lamination process ....................................................... 9
Anti-blocking function...................................................... 9
Cleaning.....................................................10
Storage .....................................................10
Disposal .....................................................11
Disposal of the appliance ................................................. 11
Disposal of the packaging.................................................11
Appendix....................................................12
Technical data ..........................................................12
Notes on the EU Declaration of Conformity ................................... 12
Kompernass Handels GmbH warranty .......................................13
Service................................................................ 14
Importer ............................................................... 14

■ 2 │ GB│IE ULG 350 B1
Introduction
Information for these operating instructions
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a component of the Laminator ULG 350 B1 (henceforth designated as the
appliance) and they supply you with important information on the intended use,
safety, installation and connection as well as operation of the appliance.
These operating instructions must be constantly kept available close to the appli-
ance. They are to be read and applied by everyone occupied with operating the
appliance and eliminating any malfunctions it may have.
Retain these operating instructions and pass them on, with the appliance, to any
future owners.
Copyright
This documentation is copyright protected.
All reproductions or duplications, also as extracts, as well as representations
of the illustrations, even in an altered state, are only permitted with the written
approval of the manufacturer.
Limited liability
All technical information, data and instructions for installation, connection and
operation contained in this operating manual correspond to the latest available
at the time of printing and, to the best of our knowledge, take into account our
previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to observe
these instructions, improper use, incompetent repairs, making unauthorised modi-
fications or for using unapproved replacement parts.
Intended use
This laminator is intended exclusively for use in domestic households, for the hot
and cold lamination of documents made from paper or cardboard. This appliance
is not intended for commercial or industrial use.
This appliance is not intended for any other use or for uses beyond those men-
tioned. Claims of any kind for damage resulting from unintended use will not
be accepted. The user alone bears liability.

GB│IE │ 3 ■
ULG 350 B1
Safety
In this chapter you receive important safety information regarding the handling
of the appliance. This appliance complies with the statutory safety regulations.
Incorrect usage can lead to personal injury and property damage.
Basic Safety Instructions
For safe handling of the appliance observe the following
safety information:
■ Before use check the appliance for visible external damage.
Do not put into operation an appliance that is damaged.
There will be a risk of a fatal electrical shock.
■ Repairs should only be carried out by authorised specialist
companies or by the Customer Services department. Incorrect
repairs can result in significant risks for the user. In addition,
warranty claims become void.
■ To avoid risks, arrange for a defective power cable to be re-
placed by qualified technicians or by our Customer Service
Department.
■ NEVER use the appliance with a defective power cable.
There will be a risk of a fatal electrical shock.
■ Do not use extension cables or power socket strips that do
not meet the required safety standards.
■ The mains power socket must be easily accessible, so that
the power cable can be easily and quickly disconnected in
the event of an emergency.
■ Do not use an external timing switch or a separate remote
control system to operate the appliance.
■ This appliance may be used by children aged 8 over and by
persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, provided that they are under
supervision or have been told how to use of the appliance safely
and are aware of the potential risks. Children must not play
with the appliance. Cleaning and user maintenance tasks must
not be carried out by children unless they are supervised.

■ 4 │ GB│IE ULG 350 B1
■ Never perform hot lamination on flammable, heat-sensitive
and/or meltable materials and do not laminate drawings on
temperature-sensitive paper or material that will undergo
changes in colour or quality when subjected to heat.
■ Never laminate valuable or unique documents. Although the
appliance complies with all current safety norms/standards,
malfunctions can never be completely ruled out. Malfunctions
with the laminator can result in damage to the document
being laminated.
■ The device is suitable for indoor use only.
WARNING – RISK OF INJURY!
Moving parts
Keep body parts away from moving parts.
There is risk of crushing injuries!
Setting up and connecting to the power supply
Items supplied and transport inspection
The appliance is delivered with the following components as standard:
▯ Laminator ULG 350 B1
▯ 10 x Laminating pouches DIN A4 for hot laminating (80 micron)
▯ 10 x Laminating pouches DIN A5 for hot laminating (80 micron)
▯ 10 x Laminating pouches for hot lamination of business cards (80 micron)
▯ This operating manual
NOTICE
► Check the contents to make sure everything is present and for signs of visible
damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see chapter Service).

GB│IE │ 5 ■
ULG 350 B1
♦ Remove the appliance, the laminating pouches and the operating instructions
from the box.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing by children. There is
a risk of suffocation!
Requirements on the installation site
For safe and flawless operation of the appliance, the installation site must comply
with the following requirements:
■ When setting it up, place the appliance on a firm, flat and horizontal surface.
■ Set up the appliance so that there is at least 30 cm of free space in front of
the laminator. Otherwise, the pouch will not be ejected completely from the
laminator after lamination.
■ Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
IMPORTANT
► Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
This data must match in order to avoid any damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire effect).
♦ Insert the plug into a mains power socket.

■ 6 │ GB│IE ULG 350 B1
Appliance description
1Pouch slot for manual pouch insertion
2Power indicator light (appliance switched on)
3Ready indicator light (ready for use)
4Anti-blocking switch and pouch thickness switch
5On/Off switch (ON/OFF)
6Selector switch for hot and cold lamination (HOT/COLD)
7Pouch ejector slot
Handling and operation
In this chapter you will receive important information about the handling and
operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch 6
position
Pouch thickness
switch 4position
Laminating pouch
thickness
Hot 80 > 60 - 80
Hot 125 85 - 125
Cold 125 to 200
NOTICE
► For high-gloss photos, you should select the switch position “125” as well
as the appropriate pouch thickness.

GB│IE │ 7 ■
ULG 350 B1
Preparing for hot lamination
♦ Insert the plug of the laminator into a mains power socket.
♦ Switch the appliance on by pushing the On/Off switch 5to the “ON” posi-
tion. The red Power indicator light 2lights up.
♦ Set the selector switch for hot and cold lamination 6to “HOT”.
♦ Place the pouch thickness switch 4at the corresponding pouch thickness
(see also chapter Switching levels).
NOTICE
► The attainment of the operating temperature is indicated by the glowing
of the green indicator light Ready 3. For a more uniform laminating result
we recommend, especially for thinner foils (below 125 Micron), and after
adjustment to a different foil thickness, to first wait an additional 2-3 minutes
before beginning with lamination.
♦ Place the document to be laminated into a laminating pouch of the
appropriate size.
NOTICE
► Ensure that all edges of the document have at least two millimetres of
space to the edges of the laminating pouch, as shown in Fig. 1.
► Make certain that you use only one pouch for laminating. First flip it up, as
shown in Fig. 2.
► For further information about the lamination process, please read the
section Lamination process.
Fig. 1
Fig. 2