UNITED OFFICE ULG 350 B1 User manual

IAN 277383
LAMINATOR ULG 350 B1
LAMINATOR
Operating instructions
LAMINIERGERÄT
Bedienungsanleitung

GB/IE/NI Operating instructions Page 1
DE/AT / CH Bedienungsanleitung Seite 15
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

 



ULG 350 B1 GB│IE│NI │ 1 ■
Index
Introduction...................................................2
Information for these operating instructions..................................... 2
Copyright............................................................... 2
Limited liability ........................................................... 2
Intended use ............................................................ 2
Warning symbols used .................................................... 3
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Basic Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up and connecting to the power supply .....................5
Items supplied and transport inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking .............................................................. 5
Disposal of the packaging.................................................. 6
Requirements on the installation site .......................................... 6
Electrical connection ...................................................... 6
Appliance description...........................................7
Handling and operation.........................................7
Suitable laminating pouches ................................................ 7
Switching levels .......................................................... 7
Preparing for hot lamination ................................................ 8
Preparing for cold lamination ............................................... 9
Lamination process ....................................................... 9
Anti-blocking function..................................................... 10
Cleaning.....................................................10
Storage .....................................................11
Disposal .....................................................11
Appendix....................................................12
Technical data .......................................................... 12
Notes on the Declaration of Conformity ......................................12
Kompernass Handels GmbH warranty............................13
Service................................................................14
Importer ...............................................................14

ULG 350 B1
■ 2 │ GB│IE│NI
Introduction
Information for these operating instructions
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a component of the Laminator ULG 350 B1 (henceforth designated as the
appliance) and they supply you with important information on the intended use,
safety, installation and connection as well as operation of the appliance.
These operating instructions must be constantly kept available close to the appli-
ance. They are to be read and applied by everyone occupied with operating the
appliance and eliminating any malfunctions it may have.
Retain these operating instructions and pass them on, with the appliance, to any
future owners.
Copyright
This documentation is copyright protected.
All reproductions or duplications, also as extracts, as well as representations
of the illustrations, even in an altered state, are only permitted with the written
approval of the manufacturer.
Limited liability
All technical information, data and instructions for installation, connection and
operation contained in this operating manual correspond to the latest available
at the time of printing and, to the best of our knowledge, take into account our
previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to observe
these instructions, improper use, incompetent repairs, making unauthorised modi-
fications or for using unapproved replacement parts.
Intended use
This laminator is intended exclusively for use in domestic households, for the hot
and cold lamination of documents made from paper or cardboard. This appliance
is not intended for commercial or industrial use.
This appliance is not intended for any other use or for uses beyond those men-
tioned. Claims of any kind for damage resulting from unintended use will not
be accepted. The user alone bears liability.

ULG 350 B1 GB│IE│NI │ 3 ■
Warning symbols used
In these operating instructions the following warnings are used:
DANGER
A warning at this risk level indicates a threateningly dangerous
situation.
If the dangerous situation is not avoided, it could result in death or serious injury.
► Follow the instructions given in this warning to avoid the risk of death or
severe personal injury.
WARNING
A warning at this risk level indicates a possible dangerous
situation.
If the dangerous situation is not avoided it could lead to injuries.
► Follow the instructions given in this warning to avoid the risk of personal
injuries.
IMPORTANT
A warning at this risk level indicates possible property damage.
If the situation is not avoided it could lead to property damage.
► Follow the instructions in this warning to avoid property damage.
NOTICE
► A notice indicates additional information that may assist you in the handling
of the appliance.

ULG 350 B1
■ 4 │ GB│IE│NI
Safety
In this chapter you receive important safety information regarding the handling
of the appliance. This appliance complies with the statutory safety regulations.
Incorrect usage can lead to personal injury and property damage.
Basic Safety Instructions
For safe handling of the appliance observe the following
safety information:
■ Before use check the appliance for visible external damage.
Do not put into operation an appliance that is damaged.
There will be a risk of a fatal electrical shock.
■ Repairs should only be carried out by authorised specialist
companies or by the Customer Services department. Incorrect
repairs can result in significant risks for the user. In addition,
warranty claims become void.
■ To avoid risks, arrange for a defective power cable to be re-
placed by qualified technicians or by our Customer Service
Department.
■ NEVER use the appliance with a defective power cable.
There will be a risk of a fatal electrical shock.
■ Do not use extension cables or power socket strips that do
not meet the required safety standards.
■ The mains power socket must be easily accessible, so that
the power cable can be easily and quickly disconnected in
the event of an emergency.
■ Do not use an external timing switch or a separate remote
control system to operate the appliance.
■ This appliance may be used by children aged 8 over and by
persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, provided that they are under
supervision or have been told how to use of the appliance safely
and are aware of the potential risks. Children must not play
with the appliance. Cleaning and user maintenance tasks must
not be carried out by children unless they are supervised.

ULG 350 B1 GB│IE│NI │ 5 ■
■ Never perform hot lamination on flammable, heat-sensitive
and/or meltable materials and do not laminate drawings on
temperature-sensitive paper or material that will undergo
changes in colour or quality when subjected to heat.
■ Never laminate valuable or unique documents. Although the
appliance complies with all current safety norms/standards,
malfunctions can never be completely ruled out. Malfunctions
with the laminator can result in damage to the document
being laminated.
Setting up and connecting to the power supply
Items supplied and transport inspection
The appliance is delivered with the following components as standard:
▯ Laminator ULG 350 B1
▯ 10 x Laminating pouches DIN A4 for hot laminating (80 micron)
▯ 10 x Laminating pouches DIN A5 for hot laminating (80 micron)
▯ 10 x Laminating pouches for hot lamination of business cards (80 micron)
▯ This operating manual
NOTICE
► Check the contents to make sure everything is present and for signs of visible
damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see chapter Service).
Unpacking
♦ Extract the appliance, the laminating pouches and the operating instructions
from the carton.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing by children. There is
a risk of suffocation!

ULG 350 B1
■ 6 │ GB│IE│NI
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the appli-
ance ideally for its return.
Requirements on the installation site
For safe and flawless operation of the appliance, the installation site must comply
with the following requirements:
■ When setting it up, place the appliance on a firm, flat and horizontal surface.
■ Set up the appliance so that there is at least 30 cm of free space in front of
the laminator. Otherwise, the pouch will not be ejected completely from the
laminator after lamination.
■ Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
IMPORTANT
► Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
This data must match in order to avoid any damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire effect).
♦ Insert the plug into a mains power socket.

ULG 350 B1 GB│IE│NI │ 7 ■
Appliance description
Pouch slot for manual pouch insertion
2Power indicator light (appliance switched on)
3Ready indicator light (ready for use)
4Anti-blocking switch and pouch thickness switch
5On/Off switch (ON/OFF)
6Selector switch for hot and cold lamination (HOT/COLD)
Pouch ejector slot
Handling and operation
In this chapter you will receive important information about the handling and
operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch
position 6
Pouch thickness
switch position 4
Laminating pouch
thickness
Hot 80 > 60 - 80
Hot 125 85 - 125
Cold 125 to 200
NOTICE
► For high-gloss photos, you should select the switch position “125” as well
as the appropriate pouch thickness.

ULG 350 B1
■ 8 │ GB│IE│NI
Preparing for hot lamination
♦ Insert the plug of the laminator into a mains power socket.
♦ Switch the appliance on by pushing the On/Off switch 5to the “ON” posi-
tion. The red Power indicator light 2lights up.
♦ Set the selector switch for hot and cold lamination 6to “HOT”.
♦ Place the pouch thickness switch 4at the corresponding pouch thickness
(see also chapter Switching levels).
NOTICE
► The attainment of the operating temperature is indicated by the glowing
of the green indicator light Ready 3. For a more uniform laminating result
we recommend, especially for thinner foils (below 125 Micron), and after
adjustment to a different foil thickness, to first wait an additional 2-3 minutes
before beginning with lamination.
♦ Place the document to be laminated into a laminating pouch of the
appropriate size.
NOTICE
► Ensure that all edges of the document have at least two millimetres of
space to the edges of the laminating pouch, as shown in Fig. 1.
► Make certain that you use only one pouch for laminating. First flip it up, as
shown in Fig. 2.
► For further information about the lamination process, please read the
section Lamination process.
Fig. 1
Fig. 2

ULG 350 B1 GB│IE│NI │ 9 ■
Preparing for cold lamination
IMPORTANT
► After hot laminating, allow the laminator to cool down completely before
beginning with cold lamination. Bear in mind, the rollers inside the laminator
will still be hot. This could damage the laminating pouch and the document
to be laminated!
♦ Insert the plug of the laminator into a mains power socket.
♦Switch the appliance on by pushing the On/Off switch 5to the “ON” position.
The red Power indicator light 2lights up.
♦ Set the selector switch for hot and cold lamination 6to “COLD”. The green
Ready indicator light 3lights up.
♦ Place the pouch thickness switch 4at the corresponding pouch thickness
(see also chapter Switching levels).
♦ Place the document to be laminated into a laminating pouch of the appropriate
size.
NOTICE
► Ensure that all edges of the document have at least two millimetres of space
to the edges of the laminating pouch, as shown in Fig. 1.
► Make certain that you use only one pouch for laminating. First flip it up, as
shown in Fig. 2.
► For further information about the lamination process, please read the section
Lamination process.
Lamination process
♦ Place the pouch centrally on the small supporting surface at the pouch slot .
If the size permits, the pouch should be placed with the closed side towards
the pouch slot .
♦ Slide the pouch slowly and straightly into the pouch slot .
♦ When you have slid the pouch several centimetres into the slot it will then
be pulled in automatically. Release the laminating pouch as soon as you
notice it being pulled in automatically.
IMPORTANT
► Ensure there is at least 30 cm of open space in front of the laminator. Oth-
erwise, the pouch will not be ejected completely from the laminator after
lamination. This could damage the pouch.
♦ The finished and laminated pouch is ejected from the pouch ejector slot
of the laminator.

ULG 350 B1
■ 10 │ GB│IE│NI
NOTICE
►Only after hot lamination: When the finished laminated pouch is
ejected from the pouch ejector slot of the laminator, it is hot and can
easily change its shape. For this reason, let the laminated pouch cool for
one minute before touching it.
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object. This will
give it a smooth and flawless surface.
♦ If you do not wish to start another laminating procedure, move the On/Off
switch 5to “OFF“ and rotate the pouch thickness switch 4to the ABS
position.
♦ Disconnect the plug from the mains power socket.
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦ Turn the anti-blocking switch 4to the position ABS. The pouch will no longer
be drawn in.
♦ Remove the pouch and turn the anti-blocking switch 4back to the desired
pouch thickness.
♦ Re-start the lamination process.
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing.
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent.

ULG 350 B1 GB│IE│NI │ 11 ■
Cleaning the inside of the appliance:
With every lamination, contaminants are deposited on the rollers inside the
laminator. Over time, this reduces the performance of the laminator.
You should therefore clean the rollers inside the laminator after use.
♦ Prepare the appliance for use, as described in the chapter Preparing for
hot lamination, until the green indicator light Ready 3glows.
♦ Then guide a sheet of folded in the middle A4 paper (maximum thickness
1.0 mm), without a pouch and with the fold forward, slowly into the manual
pouch insertion slot .
♦ Release the sheet as soon as you notice that it is being pulled in automatically.
The contaminants on the rollers inside the laminator now firmly attach themselves
to the sheet of paper. The paper will be ejected from the pouch ejector slot
of the laminator.
♦ Repeat this cleaning process several times. Use a fresh clean sheet of paper
each time.
When you no longer see any contaminants on the paper, the rollers inside the
laminator are clean.
Storage
♦ Store the appliance in a clean, dry place away from direct sunlight.
Disposal
Do not dispose of the appliance into the normal household waste.
This product is subject to the provisions of the European Directive
2012/19/EU WEEE (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Pay heed to the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.

ULG 350 B1
■ 12 │ GB│IE│NI
Appendix
Technical data
Operational voltage 220-240 V ∼, 50 Hz
Current consumption 1.6 A
Power consumption 350 W
Protection class II /
Pouch width max. 230 mm
Pouch thickness for hot lamination max. 125 Micron
Pouch thickness for cold lamination max. 200 Micron
Lamination times
Sheet size Pouch thickness switch
position: 80 Micron
Pouch thickness switch
position: 125 Micron
DIN A4 approx. 40 s approx. 51 s
DIN A5 approx. 29 s approx. 36 s
Overheating protection
This appliance is fitted with an overheating protector. If the motor overheats
due to overloading, the appliance switches itself off automatically. In this case,
disconnect the power cable and wait until the appliance has cooled down to
room temperature. You can then reconnect the power cable with a mains power
socket and take the appliance back into operation. We recommend that you let
the appliance cool down for about 30 minutes after 2 hours of operation.
Notes on the Declaration of Conformity
This appliance complies, in regards to conformance with
the basic requirements and other relevent regulations, with
the EMC Directive 2014/30/EU, as well as the Directive
for Low Voltage Devices 2014/35/EU.
The complete original Declaration of Conformity can be
obtained from the importer.

ULG 350 B1 GB│IE│NI │ 13 ■
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights are
not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your
original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase
of the product, we will either repair or replace the product for you at our discretion.
This warranty service is dependent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written description of the fault and its time
of occurrence.
If the defect is covered by the warranty, your product will either be repaired or replaced
by us. The repair or replacement of a product does not signify the beginning of a
new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also
applies to replaced and repaired components. Any damage and defects present at
the time of purchase must be reported immediately after unpacking. Repairs carried out
after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines
and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend
to product parts subject to normal wear and tear or fragile parts such as switches,
batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or
improperly maintained. The directions in the operating instructions for the product
regarding proper use of the product are to be strictly followed. Uses and actions that
are discouraged in the operating instructions or which are warned against must be
avoided.
This product is intended solely for private use and not for commercial purposes. The
warranty shall be deemed void in cases of misuse or improper handling, use of force
and modifications/repairs which have not been carried out by one of our authorised
Service centres.

ULG 350 B1
■ 14 │ GB│IE│NI
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
▯ Please have the till receipt and the item number (e.g. IAN 12345) available as
proof of purchase.
▯ You will find the item number on the type plate, an engraving on the front page of
the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
▯ If functional or other defects occur, please contact the service department listed
either by telephone or by e-mail.
▯ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase (till
receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product
videos and software on www.lidl-service.com.
Service
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: k[email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: k[email protected]
IAN 277383
Importer
Please note that the following address is not the service address. Please use the
service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

ULG 350 B1 DE│AT│CH │ 15 ■
Inhaltsverzeichnis
Einführung ...................................................16
Informationen zu dieser Bedienungsanleitung..................................16
Urheberrecht ...........................................................16
Haftungsbeschränkung ...................................................16
Bestimmungsgemäße Verwendung ..........................................16
Verwendete Warnhinweise ................................................17
Sicherheit....................................................18
Grundlegende Sicherheitshinweise ..........................................18
Aufstellen und Anschließen .....................................19
Lieferumfang und Transportinspektion ........................................19
Auspacken.............................................................19
Entsorgung der Verpackung ............................................... 20
Anforderungen an den Aufstellort ...........................................20
Elektrischer Anschluss .................................................... 20
Gerätebeschreibung...........................................21
Bedienung und Betrieb.........................................21
Geeignete Folientaschen ..................................................21
Schaltstufen ............................................................21
Heißlaminieren vorbereiten ................................................22
Kaltlaminieren vorbereiten .................................................23
Laminiervorgang ........................................................23
Anti-Blockier-Funktion .....................................................24
Reinigung....................................................24
Aufbewahrung ...............................................25
Entsorgung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Anhang .....................................................26
Technische Daten........................................................26
Hinweise zur Konformitätserklärung ......................................... 26
Garantie der Kompernaß Handels GmbH .........................27
Service................................................................ 28
Importeur ..............................................................28

ULG 350 B1
■ 16 │ DE│AT│CH
Einführung
Informationen zu dieser Bedienungsanleitung
Herzlichen Glückwunsch zum Kauf Ihres neuen Gerätes.
Sie haben sich damit für ein hochwertiges Produkt entschieden. Diese Bedie-
nungsanleitung ist Bestandteil des Laminiergerätes ULG 350 B1 (nachfolgend
als Gerät bezeichnet) und gibt Ihnen wichtige Hinweise für den bestimmungs-
gemäßen Gebrauch, die Sicherheit, den Anschluss sowie die Bedienung des
Gerätes.
Die Bedienungsanleitung muss ständig in der Nähe des Gerätes verfügbar sein.
Sie ist von jeder Person zu lesen und anzuwenden, die mit der Bedienung und
Störungsbehebung des Gerätes beschäftigt ist.
Bewahren Sie diese Bedienungsanleitung auf und geben Sie diese mit dem
Gerät an Nachbesitzer weiter.
Urheberrecht
Diese Dokumentation ist urheberrechtlich geschützt.
Jede Vervielfältigung, bzw. jeder Nachdruck, auch auszugsweise, sowie die
Wiedergabe der Abbildungen, auch im veränderten Zustand ist nur mit schriftlicher
Zustimmung des Herstellers gestattet.
Haftungsbeschränkung
Alle in dieser Bedienungsanleitung enthaltenen technischen Informationen, Daten
und Hinweise für den Anschluss und die Bedienung entsprechen dem letzten
Stand bei Drucklegung und erfolgen unter Berücksichtigung unserer bisherigen
Erfahrungen und Erkenntnisse nach bestem Wissen.
Aus den Angaben, Abbildungen und Beschreibungen in dieser Bedienungsanlei-
tung können keine Ansprüche hergeleitet werden.
Der Hersteller übernimmt keine Haftung für Schäden aufgrund von Nichtbe-
achtung der Bedienungsanleitung, nicht bestimmungsgemäßer Verwendung,
unsachgemäßen Reparaturen, unerlaubt vorgenommenen Veränderungen oder
Verwendung nicht zugelassener Ersatzteile.
Bestimmungsgemäße Verwendung
Dieses Gerät ist ausschließlich zum Heiß- und Kaltlaminieren von Dokumenten
aus Papier oder Pappe in privaten Haushalten bestimmt. Dieses Gerät ist nicht für
den gewerblichen oder industriellen Einsatz bestimmt.
Eine andere oder darüber hinausgehende Benutzung gilt als nicht bestimmungs-
gemäß. Ansprüche jeglicher Art wegen Schäden aus nicht bestimmungsgemäßer
Verwendung sind ausgeschlossen. Das Risiko trägt allein der Benutzer.

ULG 350 B1 DE│AT│CH │ 17 ■
Verwendete Warnhinweise
In der vorliegenden Bedienungsanleitung werden folgende Warnhinweise
verwendet:
GEFAHR
Ein Warnhinweis dieser Gefahrenstufe kennzeichnet eine
drohende gefährliche Situation.
Falls die gefährliche Situation nicht vermieden wird, kann dies zum Tod oder zu
schweren Verletzungen führen.
► Die Anweisungen in diesem Warnhinweis befolgen, um die Gefahr des
Todes oder schwerer Verletzungen von Personen zu vermeiden.
WARNUNG
Ein Warnhinweis dieser Gefahrenstufe kennzeichnet eine
mögliche gefährliche Situation.
Falls die gefährliche Situation nicht vermieden wird, kann dies zu Verletzungen
führen.
► Die Anweisungen in diesem Warnhinweis befolgen, um Verletzungen von
Personen zu vermeiden.
ACHTUNG
Ein Warnhinweis dieser Gefahrenstufe kennzeichnet einen
möglichen Sachschaden.
Falls die Situation nicht vermieden wird, kann dies zu Sachschäden führen.
► Die Anweisungen in diesem Warnhinweis befolgen, um Sachschäden zu
vermeiden.
HINWEIS
► Ein Hinweis kennzeichnet zusätzliche Informationen, die den Umgang mit
dem Gerät erleichtern.