Unverferth CROSS-FOLD ROLLING HARROW 1245 User manual
Seedbed Tillage
ROLLING HARROW® 1245/1245D
Soil Conditioner
12’ - 37’ Flat/Stack/Vertical-Fold Models
Serial # A64740100 & Higher
Part No. 77734
Pull-Type Rolling Harrow 1245/1245D — Introduction
2
Foreword
This symbol identifies important safety messages. When you see it, read the message
that follows and be alert to the possibility of personal injury.
Remember, safety instructions stated in this manual are for your protection. Read them
carefully and follow them closely when working around or using this machine.
Read and study this manual completely before attempting to operate this implement. Take this
manual to the field for handy reference when operating, adjusting, or servicing your machine.
When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined
by standing behind the machine and facing in the direction of travel.
Pull-Type Rolling Harrow 1245/1245D — Introduction
3
Product Information
The information, specifications, and illustrations in the manual are on the basis of information avail-
able at the time it was written. Due to continuing improvements in the design and manufacture
of Unverferth products, all specifications and information contained herein are subject to change
without notice.
FIG. 1
15’ Base
Serial Number
Location
12’ Base
Serial Number
Location
When ordering parts or when requesting further information or assistance, always give the
following information:
• Machine name
• Serial number
All products manufactured by Unverferth Mfg. Co., Inc. are warranted to be free from
material and workmanship
defects for one full year from time of consumer delivery. Your local
dealer will gladly assist you with any warranty questions.
Please fill out and retain this portion for your records. The serial number plate is located
on the inside of the main frame on the left hand side of the machine (FIG. 1).
Purchase Date __________________ Model _____________Serial No._______________________________
Dealer ______________________________________ City __________________________________________
Dealer Contact ______________________________________ Phone ________________________________
Pull-Type Rolling Harrow 1245/1245D — Introduction
4
Table of Contents
Foreword ........................................................................................................................................2
Product Information........................................................................................................................3
SECTION I
Safety
General Hazard Information ....................................................................................................... 1-2
Safety Decals ............................................................................................................................. 1-3
Following Safety Instructions ..................................................................................................... 1-4
Before Servicing......................................................................................................................... 1-4
Before Operating ........................................................................................................................ 1-5
During Operation........................................................................................................................ 1-5
Before Transporting .................................................................................................................... 1-5
During Transport......................................................................................................................... 1-6
Pressurized Oil ........................................................................................................................... 1-6
Preparing for Emergencies......................................................................................................... 1-7
Wearing Protective Equipment ................................................................................................... 1-7
Pull-Type Rolling Harrow 1245/1245D — Introduction
5
Table of Contents
SECTION II
Set Up
General Set Up Information ....................................................................................................... 2-2
12’ & 15’ Base Shipping Bundles ............................................................................................ 2-3
12’ Base, 3-9’ Wing Shipping Bundles..................................................................................... 2-4
15’ Base, 3-11’ Wing Shipping Bundles................................................................................... 2-6
Optional Shipping Bundles......................................................................................................... 2-8
Accessory Shipping Bundles ...................................................................................................... 2-9
Wings Fold Linkage ................................................................................................................. 2-10
Wings to Base Frame.............................................................................................................. 2-11
Hitch Assembly......................................................................................................................... 2-12
Truss Kit (35’ & 37’ Models).................................................................................................. 2-13
Base Wheel Assembly.............................................................................................................. 2-15
Transport Chain........................................................................................................................ 2-17
Wing Rest Stands .................................................................................................................... 2-18
Wing Fold Cylinders................................................................................................................. 2-20
Main Frame Basket Rocker Arm Assembly - Model 1245D Only.......................................... 2-23
Stack Fold Sequence Valve Assembly ..................................................................................... 2-24
Hydraulic Assembly .................................................................................................................. 2-25
Hydraulic System ..................................................................................................................... 2-32
Drum Scraper Assembly .......................................................................................................... 2-36
Drum/Basket & Frame Assemblies .......................................................................................... 2-37
Basket & Frame Assemblies.................................................................................................... 2-39
Jack Assembly ......................................................................................................................... 2-40
SMV Emblem............................................................................................................................ 2-43
Hose Holder ............................................................................................................................. 2-44
Transport Marking & Light Kit................................................................................................. 2-45
Wing Transport Wheels (Optional)............................................................................................ 2-48
Leveler Bar Assembly (Optional).............................................................................................. 2-51
Diagonal Tooth One-Bar Layouts ............................................................................................. 2-52
Weld-In Reinforcement Disc (Optional) .................................................................................... 2-58
Pilot Check Valve (Optional)..................................................................................................... 2-60
Dual Hydraulic Kits (Optional).................................................................................................. 2-61
Tire Scraper Kit (Optional)....................................................................................................... 2-64
A-Frame Gooseneck Hitch Assembly (Optional)....................................................................... 2-65
Pull-Type Rolling Harrow 1245/1245D — Introduction
6
Table of Contents
SECTION III
Operation
General Operation Information ................................................................................................... 3-2
Preparing Tractor........................................................................................................................ 3-2
Preparing Primary Tillage Tool................................................................................................... 3-3
Preparing Rolling Harrow........................................................................................................... 3-4
Bolts and Nuts .................................................................................................................... 3-4
Pins...................................................................................................................................... 3-4
Leveler Bar Mounting Arms ................................................................................................ 3-4
Hydraulics ............................................................................................................................ 3-4
Lubrication ........................................................................................................................... 3-4
Tire Pressure ....................................................................................................................... 3-4
Attaching Rolling Harrow To Primary Tillage Tool or Tractor.................................................... 3-5
Unfolding The Wings.................................................................................................................. 3-7
Transport Chain.......................................................................................................................... 3-8
Transporting................................................................................................................................ 3-9
Unhitching ................................................................................................................................ 3-11
Field Adjustments..................................................................................................................... 3-12
Rolling Harrow Basket....................................................................................................... 3-12
Basket Running Position.................................................................................................... 3-13
Normal Position........................................................................................................... 3-13
Alternate Position ........................................................................................................ 3-13
Leveler Bar .............................................................................................................................. 3-14
Spring Tension Adjustment ................................................................................................ 3-15
Spike Bar Adjustment........................................................................................................ 3-16
Diagonal Bar Adjustment................................................................................................... 3-16
Coil Tine Adjustment ......................................................................................................... 3-16
Leveler Bar Lock-Up ......................................................................................................... 3-17
Basket Pitch Adjustment (Optional).......................................................................................... 3-18
Pull-Type Rolling Harrow 1245/1245D — Introduction
7
Table of Contents
SECTION IV
Maintenance
Storage....................................................................................................................................... 4-2
Lubrication.................................................................................................................................. 4-3
Replacing Rolling Harrow Basket Bearings ............................................................................... 4-4
Replacing Spring Assemblies ..................................................................................................... 4-5
Hub Assembly ............................................................................................................................ 4-6
Hydraulic System ....................................................................................................................... 4-7
Troubleshooting......................................................................................................................... 4-11
Complete Torque Chart ............................................................................................................ 4-12
Hydraulic Fittings ..................................................................................................................... 4-12
Wheels and Tires..................................................................................................................... 4-13
Wheel Nut Torque.............................................................................................................. 4-13
Tire Pressure ..................................................................................................................... 4-13
Tire Warranty ..................................................................................................................... 4-14
Pull-Type Rolling Harrow 1245/1245D — Introduction
8
Table of Contents
SECTION V
Parts
A-Frame & Hitch Components................................................................................................... 5-2
Main Frame Components........................................................................................................... 5-4
Wing Components ...................................................................................................................... 5-8
Rolling Harrow Basket Components ........................................................................................ 5-12
Rolling Harrow Drum Components .......................................................................................... 5-16
Basket Pin Up & Storage Box Components............................................................................ 5-19
Leveler Bar Components.......................................................................................................... 5-20
Leveler Bar Assemblies............................................................................................................ 5-22
Truss Kit Components.............................................................................................................. 5-24
Hydraulics - 12’ & 15’ Bases - Model 1245 ........................................................................ 5-26
Hydraulics - 12’ Base - Model 1245D................................................................................... 5-28
Hydraulics - 15’ Base - Model 1245D................................................................................... 5-30
Hydraulics - Flat & Vertical Fold Model 1245
12’ Base 3’-6’ Wings & 15’ 3’-7’ Wings............................................................................... 5-32
Hydraulics - Flat & Vertical Fold - 12’ Base 3’-6’ Wings - Model 1245D.......................... 5-34
Hydraulics - Flat & Vertical Fold - 15’ Base 3’-7’ Wings- Model 1245D............................ 5-36
Hydraulics - Stack-Fold - 12’ Base 7’-9’ Wings - Model 1245........................................... 5-38
Hydraulics - Stack-Fold - 15’ Base 8’-11’ Wings - Model 1245 ......................................... 5-40
Hydraulics - Stack-Fold - 12’ Base 7’-9’ Wings - Model 1245D......................................... 5-42
Hydraulics - Stack-Fold - 15’ Base 8’-11’ Wings - Model 1245D....................................... 5-44
Dual Hydraulic Kit (Optional) ................................................................................................... 5-46
Wing Transport Wheel & Hub Components ............................................................................. 5-48
Wing Transport Wheel Hydraulics ............................................................................................ 5-50
Valve / Actuator Assembly....................................................................................................... 5-52
Transport Marking & Light Kit................................................................................................. 5-53
Tire Scraper Kit (Optional)....................................................................................................... 5-54
Dual Split Function Valve Kit #76671B (Optional) .................................................................. 5-55
A-Frame Gooseneck Hitch Assembly w/Decals (Optional)....................................................... 5-56
Pull-Type Rolling Harrow 1245/1245D — Safety
1-1
SECTION I
Safety
General Hazard Information ....................................................................................................... 1-2
Safety Decals ............................................................................................................................. 1-3
Following Safety Instructions ..................................................................................................... 1-4
Before Servicing......................................................................................................................... 1-4
Before Operating ........................................................................................................................ 1-5
During Operation........................................................................................................................ 1-5
Before Transporting .................................................................................................................... 1-5
During Transport......................................................................................................................... 1-6
Pressurized Oil ........................................................................................................................... 1-6
Preparing for Emergencies......................................................................................................... 1-7
Wearing Protective Equipment ................................................................................................... 1-7
Pull-Type Rolling Harrow 1245/1245D — Safety
1-2
No accident-prevention program can be successful without the wholehearted cooperation of
the person who is directly responsible for the operation of the equipment.
A large number of accidents can be prevented only by the operator anticipating the result
before the accident is caused and doing something about it. No power-driven equipment,
whether it be transportation or processing, whether it be on the highway, in the field, or in
the industrial plant, can be safer than the person who is at the controls. If accidents are
to be prevented--and they can be prevented--it will be done by the operators who accept
the full measure of their responsibility.
It is true that the designer, the manufacturer, and the safety engineer can help; and they will
help, but their combined efforts can be wiped out by a single careless act of the operator.
It is said that, “the best kind of a safety device is a careful operator.” We, at Unverferth
Mfg. Co., Inc. ask that you be that kind of operator.
REMEMBER:
THINK SAFETY
A CAREFUL OPERATOR IS THE
BEST INSURANCE AGAINST AN
ACCIDENT!
SIGNAL WORDS
INDICATES AN EXTREMELY HAZARDOUS SITUATION OR ACTION THAT WILL RESULT
IN SERIOUS INJURY OR DEATH.
INDICATES A HAZARDOUS SITUATION OR ACTION THAT COULD RESULT IN SERIOUS
INJURY OR DEATH.
INDICATES AN UNSAFE SITUATION OR ACTION THAT MAY RESULT IN PERSONAL
INJURY.
Is used for instruction on operating, adjusting, or servicing a machine.
General Hazard Information
Pull-Type Rolling Harrow 1245/1245D — Safety
1-3
• REPLACE LOST, DAMAGED, PAINTED, OR UNREADABLE DECALS IMMEDIATELY. IF
PARTS THAT HAVE DECALS ARE REPLACED, ALSO MAKE SURE TO INSTALL NEW
DECALS. THESE DECALS INFORM AND REMIND THE OPERATOR WITH OPERATIONAL
INFORMATION AND SAFETY MESSAGES.
PART NO. 94094
PART NO. 97961
PART NO. 95136
PART NO. 95445
PART NO. 97575
PART NO. 95605
PART NO. 9829
SMV Emblem
PART NO. 901891
Part #9003126
Red Reflector
Part #9003125
Fluorescent Reflector
Part #9003127
Amber Reflector
Safety Decals
Pull-Type Rolling Harrow 1245/1245D — Safety
1-4
• Read and understand this operator’s manual before operating.
• All machinery should be operated only by trained and authorized personnel.
• To prevent machine damage, use only attachments and service parts approved by the
manufacturer.
• Always shut tractor engine off and remove key before servicing.
• Avoid personal attire such as loose tting clothing, shoestrings, drawstrings, pants cuffs,
long hair, etc., that may become entangled in moving parts.
• Do not allow anyone to ride on the implement. Make sure everyone is clear
before operating machine or towing vehicle.
• Never attempt to operate implement unless you are in driver's seat.
• Avoid working under an implement; however, if it becomes absolutely unavoidable,
make sure the implement is safely blocked.
• Ensure that all applicable safety decals are installed and legible.
• When working around the implement, be careful not to be cut by sharp edges.
• Explosive separation of a tire and rim can cause serious injury or death. Only properly
trained personnel should attempt to service a tire and wheel assembly.
Before Servicing
Following Safety Instructions
Pull-Type Rolling Harrow 1245/1245D — Safety
1-5
• Regulate speed to eld conditions. Maintain complete control at all times.
• Never service or lubricate equipment when in operation.
• Keep away from overhead power lines. Electrical shock can cause serious
injury or death.
• Use extreme care when operating close to ditches, fences, or on hillsides.
• Do not leave towing vehicle unattended with engine running.
During Operation
• Secure transport chains to towing vehicle before transporting. DO NOT transport without
chains.
• Install transport locks before transporting.
• Check for proper function of all available transport lights. Make sure that all reectors are
clean and in place on the machine. Make sure the SMV emblem is visible to approaching
traffic.
• This implement may not be equipped with brakes. Ensure that the towing vehicle has
adequate weight and braking capacity to tow this unit.
Before Transporting
• Do not stand between towing vehicle and implement during hitching.
• Always make certain everyone and everything is clear of the machine before beginning
operation.
• Verify that all safety shields are in place and properly secured.
• Ensure that all applicable safety decals are installed and legible.
Before Operating
Pull-Type Rolling Harrow 1245/1245D — Safety
1-6
Pressurized Oil
• Relieve pressure before disconnecting hydraulic lines from tractor, loosening any hydraulic
fittings or servicing hydraulic system. See hydraulic power unit manual for procedure to
relieve pressure.
• High-pressure uids can penetrate the skin and cause serious injury or death.
Use cardboard or wood to detect leaks in the hydraulic system. Seek medical
treatment immediately if injured by high-pressure uids.
• Hydraulic system must be purged of air before operating to prevent serious injury or
death.
• Do not bend or strike high-pressure lines. Do not install bent or damaged tubes or hoses.
• Repair all oil leaks. Leaks can cause res, personal injury, and environmental damage.
• Route hoses and lines carefully to prevent premature failure due to kinking and rubbing
against other parts. Make sure that all clamps, guards and shields are installed correctly.
• Check hydraulic hoses and tubes carefully. Replace components as necessary if any of
the following conditions are found:
- End fittings damaged, displaced, or leaking.
- Outer covering chafed/cut or wire reinforcing exposed.
- Outer covering ballooning locally.
- Evidence of kinking or crushing of the flexible part of a hose.
• Comply with all laws governing highway safety when moving machinery.
• Use transport lights as required by all laws to adequately warn operators of other vehicles.
• Use good judgment when transporting equipment on highways. Regulate speed to road
conditions and maintain complete control.
• Maximum speed of implement should never exceed 20 mph. Do not exceed 10 mph
during off-highway travel.
• Slow down before making sharp turns to avoid tipping. Drive slowly over rough ground
and side slopes.
• It is probable that this implement is taller, wider, and longer than the towing vehicle.
Become aware of and avoid all obstacles and hazards in the travel path of the equipment,
such as power lines, ditches, etc.
During Transport
Pull-Type Rolling Harrow 1245/1245D — Safety
1-7
• Keep a rst aid kit and properly rated re extinguisher nearby.
• Keep emergency numbers for re, rescue, and poison control personnel
near the phone.
• Wear clothing and personal protective equipment appropriate for
the job.
• Wear steel-toed shoes when operating.
• Wear hearing protection when exposed to loud noises.
• Do not wear additional hearing impairing devices such as radio headphones, etc
Preparing for Emergencies
Wearing Protective Equipment
Pull-Type Rolling Harrow 1245/1245D — Safety
1-8
Notes
Pull-Type Rolling Harrow 1245/1245D — Set Up
2-1
SECTION II
Set Up
General Set Up Information ....................................................................................................... 2-2
12’ & 15’ Base Shipping Bundles ............................................................................................ 2-3
12’ Base, 3-9’ Wing Shipping Bundles..................................................................................... 2-4
15’ Base, 3-11’ Wing Shipping Bundles................................................................................... 2-6
Optional Shipping Bundles......................................................................................................... 2-8
Accessory Shipping Bundles ...................................................................................................... 2-9
Wings Fold Linkage ................................................................................................................. 2-10
Wings to Base Frame.............................................................................................................. 2-11
Hitch Assembly......................................................................................................................... 2-12
Truss Kit (35’ & 37’ Models).................................................................................................. 2-13
Base Wheel Assembly.............................................................................................................. 2-15
Transport Chain........................................................................................................................ 2-17
Wing Rest Stands .................................................................................................................... 2-18
Wing Fold Cylinders................................................................................................................. 2-20
Main Frame Basket Rocker Arm Assembly - Model 1245D Only.......................................... 2-23
Stack Fold Sequence Valve Assembly ..................................................................................... 2-24
Hydraulic Assembly .................................................................................................................. 2-25
Hydraulic System ..................................................................................................................... 2-32
Drum Scraper Assembly .......................................................................................................... 2-36
Drum/Basket & Frame Assemblies .......................................................................................... 2-37
Basket & Frame Assemblies.................................................................................................... 2-39
Jack Assembly ......................................................................................................................... 2-40
SMV Emblem............................................................................................................................ 2-43
Hose Holder ............................................................................................................................. 2-44
Transport Marking & Light Kit................................................................................................. 2-45
Wing Transport Wheels (Optional)............................................................................................ 2-48
Leveler Bar Assembly (Optional).............................................................................................. 2-51
Diagonal Tooth One-Bar Layouts ............................................................................................. 2-52
Weld-In Reinforcement Disc (Optional) .................................................................................... 2-58
Pilot Check Valve (Optional)..................................................................................................... 2-60
Dual Hydraulic Kits (Optional).................................................................................................. 2-61
Tire Scraper Kit (Optional)....................................................................................................... 2-64
A-Frame Gooseneck Hitch Assembly (Optional)....................................................................... 2-65
Pull-Type Rolling Harrow 1245/1245D — Set Up
2-2
General Set Up Information
This section contains all of the instructions required for the complete assembly of the entire
Rolling Harrow implement.
For your safety, and the safety of others, use proper tools and equipment and always use
safe working procedures. Refer to these instructions before starting any work on your machine.
• The procedures for assembling this unit were intended for two or more people.
For ease of assembly, install all hardware loosely until assembly is complete and then tighten
according to “Torque Chart” unless otherwise specied.
• READ AND UNDERSTAND SAFETY RULES BEFORE OPERATING OR SERVICING THIS
MACHINE. REVIEW "SAFETY" SECTION IN THIS MANUAL IF NECESSARY.
• TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH.
BE SURE THE MACHINE IS SECURELY BLOCKED.
• MOVING PARTS CAN CRUSH AND CUT. KEEP AWAY FROM MOVING PARTS.
• KEEP HANDS CLEAR OF PINCH POINT AREAS.
• FALLING OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT WORK UNDER
THE MACHINE AT ANY TIME WHILE BEING HOISTED. BE SURE ALL LIFTING DEVICES
AND SUPPORTS ARE RATED FOR THE LOADS BEING HOISTED. THESE ASSEMBLY
INSTRUCTIONS WILL REQUIRE SAFE LIFTING DEVICES UP TO 3,000 LBS. SPECIFIC
LOAD RATINGS FOR INDIVIDUAL LOADS WILL BE GIVEN AT THE APPROPRIATE TIME
IN THE INSTRUCTIONS.
• EYE PROTECTION AND OTHER APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT
MUST BE WORN WHILE SERVICING THE IMPLEMENT.
Depending on the model you ordered, you should have received the following bundles:
Pull-Type Rolling Harrow 1245/1245D — Set Up
2-3
NOTE: Refer to parts section for complete parts breakdown.
ITEM PART NUMBER DESCRIPTION QTY NOTES
12’ BASE 15’ BASE
160911 60911 Mounted Tire & Wheel 9.5-15 4
277694G 77694G Jack Arm Weldment =Green= 1
77694R 77694R Jack Arm Weldment =Red=
377698B 77698B Jack Mount Weldment 1
4A
74847B -Basket & Frame 6’ (Double) Assembly 2
78466CG -HD Basket & Frame 6’ (Double) Assembly-Option
-74828B Basket & Frame 5’ (Double) Assembly 3
-78474CG HD Basket & Frame 5’ (Double) Assembly-Option
4B
76032B -Drum & Frame 6’ (Double) Assembly 2
78777CG -HD Drum & Frame 6’ (Double) Assembly-Option
-76008B Drum & Frame 5’ (Double) Assembly 3
-78776CG HD Drum & Frame 5’ (Double) Assembly-Option
5
77222G -Main Frame 12’ Assembly =Green=
1
77222R Main Frame 12’ Assembly =Red=
-77226G Main Frame 15’ Assembly =Green=
77226R Main Frame 15’ Assembly =Red=
677726B 77726B Hyd. Base Parts Bundle 1
777228G 77228G Hitch Assembly =Green= 1
77228R 77228R Hitch Assembly =Red=
877732B 77732B Lights/Transport Marking Package 1
976543B 76556B Rocker Bundle 1For Model 1245D ONLY
10 76542B -Drum/Basket Scraper Kit 2For Model 1245D ONLY
-76541B Drum/Basket Scraper Kit 3
11A 9501232 9501232 Decal 1245 2
11B 9501822 9501822 Decal 1245D 2
12 77042B 77042B Pin-Up Bushing 4/6 For Model 1245D ONLY
13 77401B 77401B Toolbox / Storage Box 1For Model 1245D ONLY
14 9093 9093 Klik Pin 4/6 For Model 1245D ONLY
15 91523 91523 Clevis Pin 4/6 For Model 1245D ONLY
Parts List
DESCRIPTIONQTYP/N
ITEM
MOUNTED TIRE & WHEEL
1
60911@
1
ARM WELDMENT
1
77694@
2
JACK MOUNT WELDMENT
1
77698@
3
BASKET & FRAME 6 FT
ASSEMBLY
1
74847@
4A
BASKET/DRUM 6 FT
ASSY-AGGRESSIVE-1245
1
76032@
4B
12 FT MAIN FRAME ASM
1
77222@
5
CARDBOARD BOX
1916926
HITCH ASSEMBLY
1
77228@
7
CARDBOARD BOX
1
XBOX-9
8
CARDBOARD BOX
1913249
DRUM SCRAPER KIT - 6' X 12"
DRUM
1
76542@
10
DECAL-1245
1950123211A
DECAL-1245D
1950182211B
BASKET PIN UP BUSHING
WELDT
1
77042@
12
STORAGE BOX / BRACKET
ASSY
1
77401@
13
KLIK PIN 3/16DX1 1/4 MIN
1909314
CLEVIS PIN 5/8 X 4
19152315
12
15
14 13
6
8
4A
4B 5
11A 11B
109
1
3
2
7
Rolling Harrow - 12’ & 15’ Base Shipping Bundles
Pull-Type Rolling Harrow 1245/1245D — Set Up
2-4
NOTE: Refer to parts section for complete parts breakdown.
Rolling Harrow - 12’ Base 3’-9’ Wing Shipping Bundles
Parts List
DESCRIPTIONQTYP/NITEM
3 FT BASKET ASSEMBLY
1
74602@
1A
BASKET & FRAME 3 FT
ASSEMBLY
174845@1A
BASKET/DRUM 3 FT
ASSY-AGGRESSIVE-1245
176030@1B
WING 3 FT LH ASM175762@2
WING 3 FT RH ASM175763@3
WING 7 FT LH ASM175770@4
WING 7 FT RH ASM
1
75771@
5
1OM82673-SHIPPI
NG CRATE ->
74127B/74128B
6
CARDBOARD BOX
191350 -> 74569B7
DRUM SCRAPER KIT - 3' 1245D1
76539@
8
BASKET PIN UP BUSHING
WELDT
177042@9
CLEVIS PIN 5/8 X 4
19152310
KLIK PIN 3/16DX1 1/4 MIN
1909311
1B
7
4
5
3
2
8
1A
9
10
11
6
Other manuals for CROSS-FOLD ROLLING HARROW 1245
2
This manual suits for next models
1
Table of contents
Other Unverferth Farm Equipment manuals
Unverferth
Unverferth BRENT 678 User manual
Unverferth
Unverferth Rolling Harrow II User manual
Unverferth
Unverferth Killbros 1065 User manual
Unverferth
Unverferth PARKER 742 User manual
Unverferth
Unverferth CROSS-FOLD ROLLING HARROW 1245 User manual
Unverferth
Unverferth Killbros 1950 User manual
Unverferth
Unverferth Killbros 1135 User manual
Unverferth
Unverferth EQUALIZER B35190100 User manual
Unverferth
Unverferth PARKER Seed Chariot 2620 User manual
Unverferth
Unverferth Killbros 735 User manual
Unverferth
Unverferth Killbros 200 Series User manual
Unverferth
Unverferth BLU-JET SubTiller II User manual
Unverferth
Unverferth BLU-JET Legacy NH3 User manual
Unverferth
Unverferth Killbros 1035 User manual
Unverferth
Unverferth RIPPER-STRIPPER 332 User manual
Unverferth
Unverferth PARKER 705 User manual
Unverferth
Unverferth PARKER 1042 User manual
Unverferth
Unverferth Killbros 1150 User manual
Unverferth
Unverferth CROSS-FOLD ROLLING HARROW 1645 User manual
Unverferth
Unverferth Perfecta 10 User manual
Popular Farm Equipment manuals by other brands
Tatu Marchesan
Tatu Marchesan COP 15 user guide
Eco Bee Box
Eco Bee Box 26 Frame instruction manual
Grouser Products
Grouser Products Ag Pro 660HD Owner's manual & parts book
Spudnik
Spudnik AIRSEP 992 Operator's manual
BVL
BVL V-MIX DRIVE Maximus Giant 17-2S Cleaning instructions
Kerbl
Kerbl SH30 230 V user guide
HDE
HDE DENTALSCOPE Instructions for use
Wiesenfield
Wiesenfield WIE-PM-1500 user manual
Green Frog Designs
Green Frog Designs Square Foot Garden How to assemble
Agrotechnic
Agrotechnic X.Quattro Superveloce operating manual
Pottinger
Pottinger MERGENTO VT 9220 Original operating instructions
Field Tuff
Field Tuff FTF-21F3PT owner's manual