Unverferth Killbros 1950 User manual

Grain Carts

Dual-Auger Model 1950

Beginning With Serial Number D43840100

Part No. 25141

GRAIN CARTS — Introduction

Foreword

This symbol identiﬁes important safety messages. When you see it, read the message

that follows and be alert to the possibility of personal injury.

Remember, safety instructions stated in this manual are for your protection. Read them care-

fully and follow them closely when working around or using this machine.

Read and study this manual completely before attempting to operate this implement. Take this

manual to the ﬁeld for handy reference when operating, adjusting, or servicing your machine.

When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined

by standing behind the machine and facing in the direction of travel.

• Theinformation,specifications,andillustrationsinthemanualarebasedoninformationavailable

at the time it was written. Due to continuing improvements in the design and manufacture of

Unverferth products, all specifications and information contained herein are subject to change

without notice.

GRAIN CARTS — Introduction

Product Information

Please ﬁll out and retain this portion for your records. All products manufactured by Unverferth

Mfg. Co., Inc. are warranted to be free from material and workmanship defects for one full year

from time of consumer delivery. Your local dealer will gladly assist you with any warranty questions.

The serial number plate is located as shown below.

Product___________________________________________________________________________________________

Serial Number_____________________________________________________________________________________

Date of Purchase___________________________________________________________________________________

Dealer____________________________________________________________________________________________

City _________________________________________________ State_________________ Zip______________

Please supply this information when you have questions or when ordering repair or replacement

parts. Your dealer needs this information to give you prompt, efﬁcient service.

GRAIN CARTS — Introduction

SECTION I

Safety

General Hazard Information ....................................................................................................... 1-2

Safety Decals ............................................................................................................................. 1-3

Follow Safety Instructions.......................................................................................................... 1-4

Before Servicing......................................................................................................................... 1-5

Before Operating ........................................................................................................................ 1-5

During Operation ........................................................................................................................ 1-6

Before Transporting .................................................................................................................... 1-6

During Transport......................................................................................................................... 1-6

Driveline Safety.......................................................................................................................... 1-7

Pressurized Oil ........................................................................................................................... 1-8

Preparing For Emergencies........................................................................................................ 1-9

Wearing Protective Equipment ................................................................................................... 1-9

Table of Contents

GRAIN CARTS — Introduction

Table of Contents

SECTION II

Set Up

Pre-Delivery Checklist ................................................................................................................ 2-2

General Set Up Information ....................................................................................................... 2-2

Hitch Installation ........................................................................................................................ 2-3

Wheels/Tire Set Up.................................................................................................................... 2-3

Sideboards.................................................................................................................................. 2-4

Transport Lighting and Markings............................................................................................... 2-5

Tank Tie Rods............................................................................................................................ 2-6

Coupling PTO Driveshaft ............................................................................................................ 2-6

Ladder Installation...................................................................................................................... 2-7

Optional Adjustable Canvas Spout Installation........................................................................... 2-8

Optional Directional Downspout #24391 Installation ................................................................. 2-9

Chain Oiler ............................................................................................................................... 2-10

FOR TARP INFORMATION, PLEASE REFER TO YOUR TARP MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

GRAIN CARTS — Introduction

Table of Contents

SECTION III

Operation

Operating Checklist .................................................................................................................... 3-2

Preparing Tractor........................................................................................................................ 3-2

Hitching to Tractor ..................................................................................................................... 3-5

Towing........................................................................................................................................ 3-9

Auger Operation ....................................................................................................................... 3-10

Operating Chain Oiler .............................................................................................................. 3-11

FOR TARP INFORMATION, PLEASE REFER TO YOUR TARP MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

GRAIN CARTS — Introduction

SECTION IV

Maintenance

Lubrication And Maintenance..................................................................................................... 4-2

Seasonal Storage ....................................................................................................................... 4-3

Electrical 7-Way Connector Plug Schematic ............................................................................. 4-4

U-Joints & Gearbox ................................................................................................................... 4-5

Tires/Wheels ............................................................................................................................... 4-5

Drivetrain Inspection .................................................................................................................. 4-6

Drive Sprockets.......................................................................................................................... 4-6

Indicator Arm ............................................................................................................................. 4-7

Flow Control Gates .................................................................................................................... 4-8

Chain Tightener Bracket ............................................................................................................ 4-8

PTO Shear-Bolt ......................................................................................................................... 4-8

PTO Shaft And Clutch................................................................................................................ 4-9

Lubrication ........................................................................................................................... 4-9

Coupling The PTO Driveshaft ............................................................................................ 4-10

Length Adjustment............................................................................................................. 4-10

Chains................................................................................................................................ 4-11

Shear Bolt And Friction Clutches...................................................................................... 4-11

To Dismantle Guard........................................................................................................... 4-12

To Assemble Guard ........................................................................................................... 4-12

To Assemble Cone............................................................................................................. 4-13

PTO Quick Disconnect ............................................................................................................. 4-13

Quick Disconnect Pin ........................................................................................................ 4-13

Quick Disconnect Disassembly.......................................................................................... 4-14

Quick Disconnect Assembly............................................................................................... 4-14

Clutch Disassembly............................................................................................................ 4-15

Clutch Assembly ................................................................................................................ 4-15

Auger Maintenance .................................................................................................................. 4-16

Horizontal Auger ................................................................................................................ 4-16

Vertical Auger .................................................................................................................... 4-16

Auger Chain Drive............................................................................................................. 4-16

Wheel, Hub and Spindle Disassembly and Assembly ............................................................. 4-17

Wheels & Tires ........................................................................................................................ 4-19

Complete Torque Chart ............................................................................................................ 4-22

Hydraulic Fittings ..................................................................................................................... 4-23

Electrical Diagrams .................................................................................................................. 4-24

FOR TARP INFORMATION, PLEASE REFER TO YOUR TARP MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

Table of Contents

GRAIN CARTS — Introduction

SECTION V

Parts

Vertical Upper Auger & Folding Components ............................................................................ 5-2

Vertical Lower Auger Components............................................................................................. 5-4

Vertical Auger Hydraulics, Chute & Door Components ............................................................. 5-6

Indicator Components................................................................................................................. 5-8

Cart Frame Components ........................................................................................................ 5-10

Touch-Up Paint......................................................................................................................... 5-13

Cleanout Door Components ..................................................................................................... 5-14

Hub Components...................................................................................................................... 5-15

Wheels & Tires ........................................................................................................................ 5-16

Track Axle Components ........................................................................................................... 5-17

Driveline Components............................................................................................................... 5-18

Optional PTO Assembly With Friction Clutch........................................................................... 5-20

Gearbox .................................................................................................................................... 5-22

Sideboards................................................................................................................................ 5-24

Lights ....................................................................................................................................... 5-26

Decals ...................................................................................................................................... 5-28

Chain Oiler ............................................................................................................................... 5-30

Optional Hydraulic Adjustable Spout........................................................................................ 5-32

FOR TARP INFORMATION, PLEASE REFER TO YOUR TARP MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

Table of Contents

GRAIN CARTS — Safety

1-1