Uplift Desk Dillo ACC101 User manual

Dillo Connecting Brackets
ACC101
©2022 UPLIFT Desk®. All Rights Reserved
For assembly assistance,
visit upliftdesk.com/contact,
or call 800-349-3839,
or email [email protected]

2
CAUTION: Read all instructions before assembly.
CAUTION: Only assemble the units per these instructions, ensuring all Dillo Connecting Bracket screws are
tightened and connection points are secure. Failure to assemble or secure parts properly may result in instability
and personal injury.
WARNING: Do not stand or jump on the Dillo pieces.
WARNING: To avoid the danger of suffocation, keep the plastic bag that the Dillo Lounge Seating pieces are packed
in away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
Safety and Warnings
Getting Started with the Dillo Lounge Collection
Under no circumstances does the manufacturer accept warranty or liability claims for damages caused from
improper use of this Dillo Lounge Collection. Please provide these instructions to any new user or owner of the
Dillo Lounge Collection.
With six seating and table options as building blocks, arrangements using the Dillo Lounge Collection are
limited only by the imagination. Dillo Connecting Brackets join pieces together for xed congurations. Visit
UPLIFTDesk.com for a variety of conguration ideas. The components of the Dillo Lounge Collection include Dillo
Seats (with back, without back, wedge, and with arms), the Dillo Table, and the Dillo Wedge Table. These will be
referred to as “pieces” throughout the instructions.
Before connecting any pieces, we recommend sorting them by type and planning the arrangement layout. This
will help you visualize where components go and in what order to connect them. For the easiest installation,
connect Dillo pieces working from one end of the arrangement to the other.
The assistance of a second person may be required to connect multiple pieces, depending on the size and
shape of the arrangement.
Examples of Dillo congurations
Dillo Linear Dillo Circle Dillo Curve Dillo Zig-Zag

3
© UPLIFT Desk • 800-349-3839 • [e-mail] • upliftdesk.com
Package Contents
Assembly Instructions
Slotted Dillo Connecting Bracket Tabbed Dillo Connecting Bracket #10 x 70mm Phillips Flat Head Screw
qty 4
Step 1 - Plan the Layout
A. Before connecting pieces together, position them in the planned arrangement, identify the pieces to be connected, and
lay out the Connecting Brackets accordingly.
B. Each Dillo Connecting Bracket set consists of one tabbed and one slotted metal piece, which t together as shown.
Where Connecting Brackets can be used
C. Connecting Brackets should be installed on the straight sides of each base, not the curved front or back because Dillo
pieces can only be joined at the sides. For congurations with 90° turns, brackets are only used on one side of each
corner piece. Connecting pieces together in segments but not connecting all segments in a complete conguration is
typical for this type of arranged seating and works well.
Connecting Brackets disconnected Connecting Brackets connected
Dillo pieces can only be joined at the sides of pieces. Dillo pieces will not connect on the front or back of pieces.
xx

4
When connecting two Seats with Back, two Seats without Back, or two Tables, use the position 1 holes on the base of both
pieces as shown:
Front view Bottom view Detailed view
When connecting a Seat with Back to a Wedge Seat or Table with the small edge to the front, use the position 1 holes on
the Seat with Back base as shown:
Front view Bottom view Detailed view
C. Position a tabbed Dillo Connecting Bracket on one side of
the base as shown and slide the bent tab underneath the
inside edge of the base. There is a slot in the plastic base
where the tab will insert.
D. See below for which set of holes to align for your
conguration. If the wrong holes are used, the front edges
of the pieces will not properly align.
Bent tab
Base slot
Step 2 - Install the Connecting Brackets
A. To avoid any damage to the oor or Dillo pieces, we
recommend assembling on a debris-free carpet or
blanket.
B. Turn the rst piece over so the base and Connecting
Bracket mounting holes are accessible.
Each piece has a pre-installed base with mounting holes
for Connecting Brackets. There are two sets of mounting
holes on each side of rectangular bases and one set of
mounting holes on each side of wedge bases. Connecting Bracket
mounting holes

5
© UPLIFT Desk • 800-349-3839 • [e-mail] • upliftdesk.com
When connecting a Seat with Back to a Wedge Seat or Table with the wide edge to the front, use the position 2 holes on
the Seat with Back base as shown:
Front view Bottom view Detailed view
When connecting a Seat with Back to a Seat without Back or a Table, use the position 2 holes on the Seat with Back base
and the position 1 holes on the Seat without Back base or Table base as shown:
Front view Bottom view Detailed view
When connecting a Seat without Back or a Table to a Wedge Seat or Table, use the position 1 holes on the Seat without
Back or Table base as shown:
Front view Bottom view Detailed view