URBAN OUTFITTERS CASTELLA User manual

CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 6
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
F K R S T U
X 1 1/4” x 2” Bolt 1/4” x 1-1/8” Bolt 1/4 flat washer 1/4 springwasher 3.5 x19mm
8 X 32 X 40 X 40 X 24 X
V W X Y Z1 Z2
5/32” x 3/8” 5/32” x 1/2”
1 X 1 X 1 X 2 X 3x32mm 2X 3x19mm 2X
Phillips screwdriver (not included)
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 6
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
F K R S T U
X 1 1/4” x 2” Bolt 1/4” x 1-1/8” Bolt 1/4 flat washer 1/4 springwasher 3.5 x19mm
8 X 32 X 40 X 40 X 24 X
V W X Y Z1 Z2
5/32” x 3/8” 5/32” x 1/2”
1 X 1 X 1 X 2 X 3x32mm 2X 3x19mm 2X
Phillips screwdriver (not included)
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 6
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
F K R S T U
X 1 1/4” x 2” Bolt 1/4” x 1-1/8” Bolt 1/4 flat washer 1/4 springwasher 3.5 x19mm
8 X 32 X 40 X 40 X 24 X
V W X Y Z1 Z2
5/32” x 3/8” 5/32” x 1/2”
1 X 1 X 1 X 2 X 3x32mm 2X 3x19mm 2X
Phillips screwdriver (not included)

CASTELLA STORAGE UNIT
Assembly Instru
ctions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 2 of 6
CASTELLA STORAGE UNIT
Assembly Instruc
tions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 2 of 6
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 6
STEP 1
With help lay the parts out onto a clean smooth surface such as carpet or cardboard. Align the Center Shelf (H)
with Top Shelf (E) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with suppled Hex
Key (P) by turning clockwise. Do Not Overtighten.
STEP 2
Align Shelf (I) with Shelf (E) and press firmly together. Insert Bolt (R), Spring Washer (S), and Flat Washer (T).
Tighten with suppled Hex Key (P) by turning clockwise. Do not overtighten. Repeat to Shelf (F) as shown
below.

CASTELLA STORAGE UNIT
Assembly Instru
ctions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 3 of 6
STEP 3
Align Shelf (J) with Shelf (F) and press firmly together. Insert Bolt (R), Spring Washer (S), and Flat Washer (T).
Tighten with suppled Hex Key (P) by turning clockwise. Do not overtighten. Repeat to Shelf (G) as shown
below.
STEP 4
Align shelves (B) and (C). Press firmly into place. Insert Bolt (R), Spring Washer (S), and Flat Washer (T).
Tighten with suppled Hex Key (P) by turning clockwise. Do not overtighten.
CASTELLA STORAGE UNIT
Assembly Instruc
tions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 3 of 6
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 6
STEP 3
Align Shelf (J) with Shelf (F) and press firmly together. Insert Bolt (R), Spring Washer (S), and Flat Washer (T).
below.
STEP 4
Align shelves (B) and (C). Press firmly into place. Insert Bolt (R), Spring Washer (S), and Flat Washer (T).

CASTELLA STORAGE UNIT
Assembly Instru
ctions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable co
pyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution
or other infringement will be
prosecuted.
Page 4 of 6
STEP 5
Align Top Shelf (A) and press firmly into place. . Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten
with suppled Hex Key (P) by turning clockwise. Do not overtighten.
STEP 6
With help align the Doors (K) with the door tracks in the bottom of Shelf (G) and the top of the Bottom Panel (D).
Hold everything into place and align the Bottom Panel (D). Press firmly into place. Insert Bolt (R), Spring
Washer (S), and Flat Washer (T). Tighten with suppled Hex Key (P) by turning clockwise. Do not overtighten.
Align Doors (K) as shown below.
CASTELLA STORAGE UNIT
Assembly Instruc
tions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution o
r other infringement will be
prosecuted.
Page 4 of 6
STEP 5
Align Top Shelf (A) and press firmly into place. . Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten
STEP 6
With help align the Doors (K) with the door tracks in the bottom of lf (G) and the top of the Bottom l (D).
Align Doors (K) as shown below.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 4 of 6
STEP 5
Align Top Shelf (A) and press firmly into place. . Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten
STEP 6
With help align the Doors (K) with the door tracks in the bottom of lf (G) and the top of the Bottom l (D).
Align Doors (K) as shown below.

CASTELLA STORAGE UNIT
Assembly Instru
ctions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert
Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
suppled Hex Key (P) by turning clock
wise. Do Not Overtighten. Screw in the Center Support Leg (O)
clockwise until tight. Align the Cap (M)
with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown.
STEP 8
can damage them.
Align the Back Panel (L) as shown. Inse
rt screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.
CASTELLA STORAGE UNIT
Assembly Instruc
tions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
suppled Hex Key (P) by turning clockwise. Do not overtighten. Screw in the Center Support Leg (O)
clockwise until tight. Align the Cap (M) with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown.
STEP 8
With help stand the Bookshelf upright making sure you do not lean It on the legs as this can damage them.
Align the Back Panel (L) as shown. Insert screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
clockwise until tight. Align the Cap (M) with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown.
STEP 8
can damage them.
Align the Back Panel (L) as shown. Insert screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.

CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 6 of 6
STEP 9
To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type.
2. Determine where the furniture is to be placed and mark location on the wall for the other mounting
bracket crew holes. It should be placed approximately 2” below the bracket mounted to the
furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screws provided through
the hole in the bracket and tightening securely using screwdriver. Please contact your local
hardware store to get the correct anchor for your wall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets on the wall.
5. Lace an end of the nylon restraint strap down through each bracket. Bring both ends together and
slide the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely laced and locked to the bracket.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 6 of 6
STEP 9
To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type.
2. Determine where the furniture is to be placed and mark location on the wall for the other mounting
bracket crew holes. It should be placed approximately 2” below the bracket mounted to the
furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screws provided through
the hole in the bracket and tightening securely using screwdriver. Please contact your local
hardware store to get the correct anchor for your wall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets on the wall.
5. Lace an end of the nylon restraint strap down through each bracket. Bring both ends together and
slide the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely laced and locked to the bracket.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 6 of 6
STEP 9
To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type.
2. Determine where the furniture is to be placed and mark location on the wall for the other mounting
bracket crew holes. It should be placed approximately 2” below the bracket mounted to the
furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screws provided through
the hole in the bracket and tightening securely using screwdriver. Please contact your local
hardware store to get the correct anchor for your wall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets on the wall.
5. Lace an end of the nylon restraint strap down through each bracket. Bring both ends together and
slide the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely laced and locked to the bracket.