URBAN OUTFITTERS MEADOW 60229192 User manual

MEADOW MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED:
#2 Phillips head screwdriver
Pencil
WARNINGS:
Do not throw away packing materials and carton until
after assembly. Assemble all parts on a clean smooth
surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place overheat or air conditioning vents.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.
PARTS INCLUDED
A) Screw JP [#8 x
32mm] x2
B) Plastic Anchor
S6 x2
C) Mirror
x1
20.5in
20.5in

MEADOW MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 2
STEP 1
Use the measurements in the graphic below to mark the location of the mirror's mounting hardware on your wall.
If you are hanging the mirror on drywall, pre-drill for the wall anchors (B) at the marked locations and then insert
them into the wall. Insert screws (A) into the wall anchors (B) and tighten, leaving about 1/4" of screw extending
out from the wall surface. If drilling into a stud, drill screws (A) directly into the wall at the marked locations,
leaving about 1/4" of screw extending out from the wall surface. Once screws (A) are secured on the wall, hang
the mirror onto the screws.