URBAN OUTFITTERS MARGOT TRIANGLE SHELF LARGE 80324254 User manual

Page 1 of 2
MARGOT TRIANGLE SHELF - LARGE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
B) Screw
[D 0.35 / 0.19 x 2.32”] x2
or
[D 8.9/4.8 x 59 mm]
A) Shelf
[18.1 x 6.5x 8.7”] x1
or
[46 x 16.5 x 22 cm]
C) Plastic Anchor
[D 0.35 ” x 1.4” Bolt] x2
or
[ D 9 x 36 mm]
TOOLS REQUIRED BUT NOT INCUDED:
Screwdriver, Drill, Hammer, Level, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on uneven
floors. Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:

Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 2
Place the shelf (A) back over the plastic anchors (D) and insert screws (B) as shown. Tighten with
a Phillips head screw driver to complete the installation.
STEP 1
Place the shelf (A) on the wall in its desired location. Ensure the shelf (A) is level and mark the location
of the mounting holes in the shelf on the wall. Pre-drill holes for the plastic anchors (D) at the marked
hole locations using a drill and use a hammer to tap them into the wall.
MARGOT TRIANGLE SHELF - LARGE
Assembly Instructions