URBAN OUTFITTERS IMARI User manual

Assembly Instructions
Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
IMARI DINING CHAIR
TOOLS REQUIRED BUT NOT INCLUDED: PHILLIPS HEAD SCREWDRIVER
(A) Back
1x
PARTS INCLUDED
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits at on uneven oors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
(B) Seat
1x
(C) Base
1x
(D Bolt M6 x 10mm
8x
(E) Hex Key
1x

Assembly Instructions
Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
IMARI DINING CHAIR
STEP 1. Align the Seat (B) with the Base (C) as shown. You may need to pull or push the rails apart or
together to make them align with the base. Press rmly together. Insert Bolts (D) and hand tighten. Align
the Back (A) as shown. Press rmly together. Insert Bolt (D). Once all bolts are installed you may tighten
them with the supplied Hex Key (E).