URBAN OUTFITTERS Etta Bed Full User manual

(B) Headboard 1x (D) Footboard 1x
(I) Center Plastic Cap 15x
(G) End Plastic Cap 30x
(A) Center Rail 1x(C) Leg 2x
(H) Slat 30x
(E) Side Rail 2x(F) Crossing Rail 2x
Etta Bed Full
Assembly Instructions
NO ADDITIONAL TOOLS REQUIRED
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
URBAN OUTFITTERS
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
01.25.2024 REV 2Page 1 of 6

(M ) Flat Washer 8x
Ф16 (P) Nut 2x
M6
M5
(Q) Hex key 1x
6mm
M4
(R) Hex key 1x (S) Wrench 1x
(N ) Flat Washer 8x
Ф23
(O ) Flat Washer 8x
Ф18
Etta Bed Full
Assembly Instructions
URBAN OUTFITTERS
(J) Bolt 8x(K) Bolt 2x
M8 x 25mm M6 x 70mm
(L) Bolt 4x
M6 x 15mm
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 601.25.2024 REV 2

J
O
N
N
x2
C
EE
E
B
URBAN OUTFITTERS
STEP 1
STEP 2
Attach Side Rails (E) to Headboard (B) with Bolts (J) and Flat Washers (O&N) as shown in the drawing below.
Tighten with supplied Hex Key (Q).
Etta Bed Full
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 6
B
C
C
STEP 1
Insert the Legs (C) into Headboard (B) as shown in the drawing below.
X 2
01.25.2024 REV 2

J
J
O
O
N
N
x2
L
M K
P
M
M
D
E
E
A
F
A
F
E
E
F
S
STEP 3
URBAN OUTFITTERS
STEP 4
Etta Bed Full
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 4 of 6
Attach Side Rails (E) to the Footboard (D) with Bolts (J) and Flat Washers (O&N) as shown in the drawing
below. Tighten with supplied Hex Key (Q).
Place Crossing Rails (F) onto the Side Rails (E). Insert the Bolts (L) and Flat washers (M) as shown in the drawing
below, then tighten with supplied Hex Key (R). Align Center Rail (A) with Crossing Rails (F) and insert Bolts (K),
Flat Washers (M) and Nuts (P) as shown in the drawing below. Tighten with supplied Hex Key (R) and Wrench (S).
D
01.25.2024 REV 2

x15
I
G
G
H
H
I
G
STEP 5
Insert Slats (H) into End Plastic Caps and Center Plastic Cap (G&I) as shown in the drawing below.
URBAN OUTFITTERS
Etta Bed Full
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 5 of 601.25.2024 REV 2

x15
Assembly complete
STEP 6
Firmly press Plastic Caps (G&I) into Side Rails (E) and Center Rail (A) as shown in the drawing below.
URBAN OUTFITTERS
Etta Bed Full
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 6 of 601.25.2024 REV 2