URBAN OUTFITTERS MASON COFFEE TABLE 51704344 User manual

Assembly Instructions
Page 1 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
MASON COFFEE TABLE
TOOLS REQUIRED BUT NOTINCLUDED: PHILLIPS HEAD SCREWDRIVER
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface such as carpet or cardboard.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills,do not rub, with a clean,white cloth.
Do not use harsh chemicals.
Before cleaning any part,test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
A. Top and Drawer
Assembly
1x
B. Side Assembly
2x
8x
F. Lock Washer
8x
G. Flat Washer
8x
C. Stretcher Rail
2x
D. Allen Bolt
1/4” x 1”
H. Allen Key
1x
E. Allen Bolt
1/4” x 5/8”
4x
Rev. 2 06.11.19

Assembly Instructions
Page 2 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
MASON COFFEE TABLE
2. Pull drawer completely out of Top (A) as shown. Set drawer aside and out of the way.
B
B
C
H
E
A
1. With help,align the Sides (B) with the Stretcher Rails (C) as shown. Insert Allen Bolt (E) and
tighten with supplied Allen Key (H)
Rev. 2 06.11.19

Assembly Instructions
Page 3 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
MASON COFFEE TABLE
3. Lay the Top (A) over onto a clean,smooth surface. With help,align the assembled base as shown.
H
D
GF
4. Insert Allen Bolt (D), Flat Washer (G), and Lock Washer (F). Tighten with supplied Allen Key (H).
Align drawer and press back into table.
Rev. 2 06.11.19