URBAN OUTFITTERS Armand 78232121 User manual

Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface.
The assembly of this item requires x 2 people
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 4
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(1) Allen bolt
M6 x 30mm
Quantity: 14pcs
(A) Mirror
Quantity: 1pc
(5) Allen key
Quantity: 1pc
(B) Left side panel
Quantity: 1pcs (D) Bottom panel Quantity: 1pc
(4) Dowel
M8 x 30mm
Quantity: 8pcs
(E) Back panel
Quantity: 2pcs
ARMAND FLOOR MIRROR
(2) Flat Washers
M6
Quantity: 10pcs
(3) Nylon Flat Washers
Quantity: 2pcs
(C) Right side panel
Quantity: 1pcs

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 4
STEP 1. With help, align the hole in Mirror (A) with the hole in left side panel (B). Attach Nylon Flat Washers (3) and
Flat Washers (2) into the Allen Bolts (1) as shown. Tighten with Allen key (5).
ARMAND FLOOR MIRROR
MIRROR
SIDE PANEL
3
221
A A
B
STEP 2. Insert Dowel (4) as shown. Align holes in back panel (E) with holes in left side panel (B). Insert the Allen Bolts (1)
and Flat Washers (2) through the Back panel (E). Tighten with Allen key (5).
B
E
E
E
1
5
2
4
FRONT

Assembly Instructions
STEP 3.
ARMAND FLOOR MIRROR
D
4
4
1 5
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 4
STEP 4. Align Bottom panel (D) with side panels. Insert Dowel (4) as shown. Insert Allen Bolt (1) through Bottom panel (D).
Tighten with Allen key (5).
Repeat step 2 on opposite side with right side panel (C).
C
C
4
D
2
1
5

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 4 of 4
FINISH
ARMAND FLOOR MIRROR
1707mm [67 1/4"]
1015mm [40"]
552mm [21 3/4"]
1613mm [63 1/2"]
300mm
[11 3/4"]