URBAN OUTFITTERS CORA LACQUERED CREDENZA User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 4
CORA LACQUERED CREDENZA
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills,do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part,test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
ANTI-TIP KIT
(2) Bracket
Quantity: 4pcs (3) Nylon strip M4 x 20mm
Quantity: 2pcs
(4) Screw
M4 x 20mm
Quantity: 4pcs
(5) Screw
M4 x 35mm
Quantity: 4pcs
(6) Wall plug
4 x L40
Quantity: 4pcs

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 4
STEP 1. Align the anti-tip brackets (2) to the top back of the case.
Insert Screws (4) and tighten completely. Do not overtighten.
2
4
CORA LACQUERED CREDENZA
Assembly Instructions

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 4
2
3
Side view
43
6
5
2
2
CORA LACQUERED CREDENZA
Assembly Instructions
STEP 2. Contact your local hardware store to purchase the correct anchors for
your wall-type. Align the brackets to the wall and make sure they line
up with the brackets on the back of the case from step 1. Screw the
brackets to the wall using the correct anchors. Slide the case to the
wall, leaving a little bit of room between the case and the wall. Feed
the Nylon Strap through both brackets and pull tight.

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 4 of 4
FINISH
CORA LACQUERED CREDENZA
Assembly Instructions