URBAN OUTFITTERS MABELLE BED User manual

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 1 of 7
HARWARDLIST
MABELLEBED
AssemblyInstructions
TOOLSREQUIRED BUT NOTINCLUDED:
Phillips Head Screwdriver
Do not throw away packing materialsand carton untilafterassembly.
Assemble allparts on a clean smooth surface
CAREINSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or Airconditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden area.
You mayneed to re-tighten all boltsafter initial use.
PARTS INCLUDED
(A)Head board
Quantity: 1pc (B)Head board Quantity: 1pc (C)Foot board Quantity: 1pc (D)Siderails Quantity: 2pcs
(E)Head board post
Quantity: 2pcs (F) Middel rail Quantity: 1pc (E)Slats Quantity: 14pcs
(1)Bolt
M8 x 20mm
Quantity: 8pcs
(5) Screw
M4 x 40mm
Quantity: 2pcs
(3) Allenkey
Quantity: 1pc
(4) Screw
M4 x 30mm
Quantity: 42pcs
(2) Bolt
M6 x 35
Quantity: 8pcs

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 2 of 7
MABELLEBED
AssemblyInstructions
STEP 1. With help, align the Siderails (D) to the
Headboard (B) and Footboard (C) as shown.
Insert Bolt (1) and tighten with supplied Hex
Key (3).
B
C
D
D
1
3
STEP 2. Align the Headboard Posts (E) with the back of the Headboard (B).
Insert Bolt (2) and tighten with supplied Hex Key (3).
A
E
2

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 3 of 7
MABELLEBED
AssemblyInstructions
STEP 3. With help align the assembled
Headboard to the bedframe as shown.
Insert Bolts (2) and tighten with
supplied Hex Key (3).
2
A
B
C
D
D
E
3

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 4 of 7
MABELLEBED
AssemblyInstructions
STEP 4. Align the Middle Rail as
shown. Press firmly into
place. F

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 5 of 7
MABELLEBED
AssemblyInstructions
STEP 5. Insert the Screw (5)
into the Middle Rail as
shown. Tighten with
Screwdriver (not included).
Do not over-tighten!
5

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 6 of 7
MABELLEBED
AssemblyInstructions
STEP 6. Lay the Slats (G) into
the frame. G

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 7 of 7
MABELLEBED
Assembly Instructions
STEP 7. Insert Screws (4) into
the Slats as shown.
Do not over-tighten.
4