URBAN OUTFITTERS DELANCEY STORAGE CABINET 51704286 User manual

Page 1 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
TOOLS REQUIRED BUT NOTINCLUDED: PHILLIPS HEAD SCREWDRIVER
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills,do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
You must install the Anti Tip Kit on the back after assembly for your
safety.
PARTS INCLUDED
F. Leg 4x G. Back Panel 1x H. Shelf Panel 1x I. Left Door 1x J. Right Door 1x
K. Wooden Dowel
M8 x 40mm
16x
L. Cam Lock Bolt
16x
M. Cam Lock
16x
18x
O. Shelf Pin
4x
P. Plastic Anchor
1x
Q. Bracket
2x
R. Screw
5/32” x 1”
1x
S. Screw
5/32” x 5/8”
1x
T. Zip tie
1x
N. Phillips Screw
5/32” x 5/8”
A. Top Panel 1x B. Left Side Panel 1x C. Right Side Panel 1x D. Back Rail 2x E. Bottom Panel 1x

Page 2 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
HOW TO USE CAM LOCK SYSTEM
180°
tools needed
(not included)

Page 3 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
1. Lay the Left Side panel (B) and Right Side panel (C) over onto a clean,smooth surface. Press in
wooden dowels (K) as shown. Screw in the cam lock bolts (L) into the locations shown, tightly.
L
K
L
K
L
K
C
B
2. With help,stand the Left Side panel upright and align the back rail (D) as shown. Insert the cam locks
(M) into the back of the rails as shown. Making sure they are aligned correctly. Press firmly together.
Tighten the cam locks with a screwdriver (not included). Make sure they turn and lock the rail into place.
Repeat for the Right Side panel.
D
D
B
C
M

Page 4 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
A
LK
B
3. Lay Top Panel (A) onto a clean,smooth surface. Press in the wooden dowels (K) as shown. Screw in cam
lock bolts (L) as shown.
4. With help,align the assembled side panels and rail. Press firmly down onto the top panel (A) as
shown, making sure all parts align. Insert cam locks (M). Tighten with screwdriver until all parts are tight
against each other.
C
M
A

Page 5 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
5. Insert cam locks (M). Tighten with screwdriver until all parts are tight against each other. With help,
flip the case upright.
M

Page 6 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
6. Lay the bottom panel (E) over onto a clean,smooth surface. Align legs (F) and screw clockwise until
snug against the bottom panel.
7. Flip the assembly over and insert wooden dowels (K) and cam bolts (L) as shown.
E
F
K
L
E

Page 7 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
8. With help,align the assembled sides and top onto the assembled bottom as shown. Press
firmly together. Insert cam locks (M). Tighten with screwdriver until all parts are snug against each
other.
M
M

Page 8 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
9. Align back panel (G) as shown. Insert screws (N). Tighten with screwdriver. Do not overtighten.
10. Align left door (I) hinges with the hinges on the cabinet as shown. Press rmly down. Repeat for the
right door (J).
G
N
I
J

Page 9 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
11. Open doors and insert shelf pins (O) into the holes in the side panels. Make sure they are all on the
same level. Carefully lay the shelf panel (H) onto the pins.
12. You will need to adjust the levelers in the legs to accommodate uneven ooring and to align the
doors correctly.
H
O

Page 10 of 10
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DELANCEY STORAGECABINET
Assembly Instructions
Rev. 1 05.08.19
13. You will need to attach the Anti Tip kit to the cabinet for safety. Contact your local hardware store to
get the correct hardware for your wall type. Insert that hardware just behind the top of the cabinet.
Insert screw (R) through the bracket (Q) into the wall. Attach the other bracket (Q) to the top of the
cabinet. Insert screw (S). Push the cabinet as close to the wall as possible and thread the zip tie (T)
through both brackets and pull tight.
T
Q
S
R
Q
P