URBAN OUTFITTERS NYLA DESK User manual

Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 5
NYLA DESK
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(2) Small allen bolt
M6 x 25mm
Quantity: 7pcs
(3) Cross nut
Quantity: 6pcs
(A) Side frame
Quantity: 2pc
(6) Allen key small
Quantity: 1pcs
(1) Large allen bolt
M6 x 65mm
Quantity: 6pcs
(B) Front Support
Quantity: 4pc (C) Back support Quantity: 2pc (D) Shelf
Quantity: 1pc
(E) Glass Top
Quantity: 1pc
(7) Allen key large
Quantity: 1pcs
(4) Dowel
M8 x 30mm
Quantity: 4pcs
(5) Table top pin
Quantity: 4pcs

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 5
STEP 1.
STEP 2. Align Shelf (D) with holes on the underside of shelf to the corresponding holes on the Side frame (A).
Then insert Small Allen Bolt (2) into holes on Side frame (A) and tighten with Allen key large (7) provided.
D
2
D
7
Align Front support (B) and Back support (C) with Side Frame (A). Insert Dowel (4) as shown.
Insert Cross nut (3) into Back Support (C) and Front Support (B) paying attention to alignment of cross nut .
Insert Large Allen Bolt (1) into hole on Side frame (A) and tighten with Allen key large (7) provided.
3 4 1
7 A
B
C
NYLA DESK

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 5
STEP 3.
STEP 4.
Insert Small Allen Bolt (2) into hole on Back support (C) and tighten with Allen key (7) provided.
2
7
Carefully place the Glass top (E) upside down on soft surface. Insert Table top pins (5) and screw them
into metal bushings on all four corners on the underside of the glass table top.
NYLA DESK
E 5

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 4 of 5
STEP 5.
STEP 6.
With help, turn over the glass table top and carefully locate pins, into the location holes on the top of the side frame.
Once the glass top is in position, you will need to secure it in place by tightening the pre inserted nuts / grub
screws in the legs, with the Allen key small (6) provided .
NYLA DESK
6

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 5 of 5
STEP 7. Turn the adjustable feet so it sits flat on the ground.
NYLA DESK