URBAN OUTFITTERS MASON 64139611 User manual

MASON SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents. Adjust
levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth. Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area. You may need to re-tighten all bolts
after initial use.
PARTS INCLUDED
(C) Metal Anchor
[M15 x 28mm] x4
(D) Machine Screw
[M8 x 35mm] x4

MASON SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 2
STEP 1
Align Wooden French Cleat (B) to wall. Mark the 4 Screw holes. It is best to use a level to make sure the Shelf hangs square.
With a Phillips head screwdriver, screw Metal anchors (C) into the wall at marked hole locations, then screw Machine
screws (D) into Metal anchors (C). If the hole aligns with a stud only use the screw no anchor is required.
STEP 2
With help hang the Shelf (A) onto Wooden French Cleat (B).